With a peak torque of >200Nm / 1770 lbf-in and a rated torque of 80Nm / 708 lbf-in, the fully redundant DA 58-D is the strongest, electromechanical, fully integrated (actuator control electronics, position sensing, motor and drivetrain in one housing) actuator in the market. Besides the well-proven redundant RS 485 interface, the DA 58-D also features a redundant CAN bus interface. The DA 58-D has been developed for applications with the highest reliability demands. The redundant – two channel – design of the actuator allows continuous operation even if one of the two channels has failed. All major components such as the electric motors, control and communication electronics, and power supply are available twice (redundant). The actuator features a triple-redundant position sensor (2 out of 3 voting). Additionally there are several sensors integrated to provide diagnostic information such as current consumption, supply voltage levels and temperature readings. All major components of the actuator are continuously diagnosed by the microcontrollers of the actuator and its health status can be read via the redundant RS485 / CAN interface.

The L Series comes with frames in various lengths to accommodate a variety of module combinations. The frames range from a basic frame with just 2 side rails and 2 end caps, to more complex versions with jackscrews, backshells, cable clamps, etc.

Super MARKOS is a new generation T2SL HOT MWIR detector in HD quality. This T2SLHOT detector satisfies requirement of tactical such as long-range surveillance and electro-optical targeting system. The Operating temperature (>130K) will reduce the maintenance cost.

CAPHMICRO has the ability to design and manufacture wire harnesses and cable assemblies for defense, aerospace, and space launch vehicles/satellites. We design and manufacture in compliance with IPC-620 and J-STD-001 standards. Additionally, we have a global supply chain capable of quickly supplying a wide range of materials. We provide comprehensive solutions for wire harnesses, from design through to manufacturing and inspection.

Honeywell 360 Display for Aviation The aviation version of the display is a wearable visor that uses augmented reality to provide civilian or military pilots with a high-resolution 360-degree view that seamlessly matches the view outside the cockpit. It also provides traffic callouts and flight instrumentation in the pilot’s field of view, which makes the Honeywell 360 Display ideal for flying at night, in bad weather or in congested airspace. The display improves safety, pilot confidence and aircraft utility. Honeywell 360 Display for Rugged Ground Vehicles Operators of ruggedized vehicles can use the display to safely maneuver in low visibility or hazardous conditions. It improves overall situational awareness, reaction speed and survivability by increasing visibility and reducing the need to consult instruments in the vehicle. The lightweight head-worn display uses real-time outside high-resolution camera feeds to create a seamless mixed-reality view and provides operators sensor information within their immediate field of view.

It is an UAV recovery system that lands a fixed-wing UAV even in mountainous terrain where there is no sufficient runway for landing. The UAV is damping through a net mounted on the vehicle and lands on an air-cushion mat. It has the advantage of being easy to deploy in places where vehicles can enter and exit. But the type of the aircraft capable of stable landing is limited.

Designed to deliver the highest level of performance, the non-ITAR TAC-450-360 IMU includes our exclusive photonic integrated chip (PIC) technology. The high-performance TAC-450-360 IMU is designed for applications in which high bandwidth, low latency, and low drift are critical. The TAC-450-360 IMU is integrated with inertial-grade accelerometers and three axes of magnetometers to provide the high accuracy levels that leading autonomous and manned platforms demand. Highlights Designed for ease of integration with flexible interface settings and programmable message outputs Excellent performance in critical applications and the specs that matter most Improved SWaP plus robust performance and survivability Technology Details Photonic Integrated Chip Technology EMCORE’s photonic integrated chip (PIC) technology* reimagines FOG technology by replacing individual fiber components with an innovative integrated planar optic chip. This results in a FOG with PIC Inside™ that’s reliable and robust. With three of these integrated photonic gyros at its core, the TAC-450-360 IMU provides the safe, accurate performance autonomous platforms demand.

Nara Space’s first standard nanosatellite for Earth observation constellations with 7 optical bands and 1.5 m GSD. Launched November 2023 to the 525 km of the orbit, it has 2 years Mission Lifetime.