CarboNIX NEO is an off-the-shelf separation system available in 8", 15", and 24“, 31.6” and 38.81” sizes. It is scalable to any custom diameter for satellites upwards of 1000 kg. While NEO uses the same lock mechanism and pusher arm subsystems as CarboNIX, NEO employs a new clamp ring system which is stronger, stiffer, can withstand higher loads and launch heavier spacecraft than any other separation system on the market.

The AB-U60 is a 60kg-class vectored-thrust eVTOL aircraft designed for surveillance and emergency logistics. Developed in response to the growing global demand for disaster response and urgent logistics solutions, the AB-U60 can be adapted for a variety of industries, including wildfire monitoring, anti-drone operations, and ship resupply. It combines an advanced fanjet electric propulsion system with a hybrid energy source to achieve high-speed flight and extended endurance. Airbility’s AB-U60 provides key advantages over competitors, offering high-speed flight of up to 200 km/h and vertical takeoff and landing capabilities for operations in confined spaces. Its low-noise fanjet propulsion system makes it suitable for both urban and suburban missions. The aircraft is also equipped with real-time data analysis and AI-based autonomous flight control systems. These features enable more efficient and safer operations.

Engine accessories for Model 250 Rolls-Royce (Allison) gas turbine engines. Bleed Valves, Fuel Controls, Fuel Nozzles, Fuel Pumps, Governors & more.

Sungjin Techwin’s control grips are designed to provide pilots with intuitive and precise control in critical missions. Engineered with ergonomic layouts, high-reliability switches, and NVIS-compatible backlighting, our grips are fully customizable to meet diverse cockpit requirements. Qualified under MIL-STD and DO-160 standards, they ensure durability and safety in extreme operational environments. With proven applications across programs such as KF-21, KUH, LAH, and the Calidus B-250, our control grips demonstrate world-class performance and trusted reliability for next-generation aircraft.

Wing shells, side shells and fuselage sections are usually made of carbon fibre composites and glued together during the production process. With many components, a groove or an open edge remains after the bonding process, which must be filled or sealed. A modified two-component epoxy resin is often mixed and then applied manually. This often entails long production times and complex quality controls. Equally high material costs due to the processing of materials from cartridges. ViscoTec defies short pot life and materials that are difficult to handle: Thanks to a coherent overall system from material removal to material application, this process can be automated. The two components are taken separately from cartridges, hobbocks or drums and fed via hose lines to a two-component dosing system. Only at the very end of the process they are mixed in a static mixing tube and applied to the substrate (e.g. via a nozzle). The process is controlled and monitored by pressure sensors.

Long-Endurance VTOL Aircraft with an Aerodynamic Design for Maximized Energy Efficiency. Equipped with Communication Systems and EO/IR Surveillance Cameras, it can fly up to 3 Hours of Mission Operation. Comes with a EO/IR Camera as Standard, and can be customized to carry payloads such as a Surveying LiDAR or Camera (≤1kg) based on customer requirements. Application : Take off/Landing on Moving Vessels, Aerial Surveying, Reconnaissance, Payload Drop (Grenade, Cargo, etc.)

The ACTUS® CORE-3 Mini Dot Sight provides rapid target acquisition with unlimited eye relief and a precisely aligned aiming point projected onto a collimated lens. Constructed from a fully sealed 7075-T6 aluminum housing, it offers exceptional durability, enabling reliable performance in even the harshest environments. Its premium lens coating ensures superior light transmission and minimal distortion, delivering crystal-clear accuracy across a wide range of conditions.

WPGM0507100M is a 12W Gallium Nitride (GaN) Monolithic Microwave Integrated Circuit (MMIC). WPGM0507100M is useful for high power C-band applications including 5.8GHz ISM-band systems. Spec Frequency : 5-7GHz Saturated Output Power : 100W@6GHz PAE : 51% Power Gain : 27.7dB@6GHz Operating Voltage : 28-32V