The maximum transmission distance varies based on the following frequency-related specifications. Camera Frequency Max Cable Length ================ =============== 20 ~ 60 MHz 10 m 60 ~ 80 MHz 7 m 80 ~ 85 MHz 5 m The PoCL Bypass function supports Power over Camera Link (PoCL) operation from the Frame Grabber to the selected camera. However, the power supply to unselected cameras is automatically disabled. To prevent power cutoff, separate power must be provided to the cameras. Configurations are available as follows, including image signal amplification. [Features of CLM-30C4]  Fully supports the Camera Link interface (Area/Line Scan).  Provides manual (switch) or remote (RS232) camera selection.  Allows selection from one of four cameras configured for Base (Layer 1) or Medium/Full (Layer 2) levels.  Supports Base/Medium/Full setups (CC1~4, RS232, LVAL, DVAL, FVAL)  PoCL bypass function: Automatically powers only the selected camera when PoCL-compatible cameras, frame grabbers, and cables are used.  Supports pixel frequency from 20 to 85 MHz.  Supports PoCL signal bypass (patented).  Enables lossless transmission.  Provides additional full-duplex RS232 communication at up to 256 Kbps.  Features a locking DC power jack (Molex).

Our firm offers end-to-end GaN production capabilities, including fabrication, packaging, test, and failure analysis to meet custom requirements. To enable customer designs, a process design kit (PDK) is available with a design manual, sample layouts, and a non-linear device model. Options available include fabrication of customer-designed wafers (“PDK foundry service”) or custom design by TransEON and fabrication according to customer specs (“NRE foundry service”). For either option, volume levels available include pilot/engineering runs, multi-project wafers (MPWs), or full production runs.

YOUR BRAND IS A DESTINATION Halfway around the world, surrounded by competitors, with market share on the line and the clock ticking on annual sales targets — this is no time to circle your wagons. Instead, turn heads with a custom-built exhibit from Kallman Creative Services, and take pride in owning an event destination that’ll stop visitors in their tracks and jumpstart those sales conversations. FROM CONCEPT TO SHOW FLOOR Who would have thought that on a bare concrete floor, in an anonymous exhibit hall, thousands of miles from your office, you could feel so at home? That’s what Kallman Creative Services does for you. We’re one of the most experienced custom builders in the trade, with over 350 clients and thousands of stands under our belts, because we know how to transform any raw space into a showpiece that works for your business. From the first concept to the last detail, whether you’re buying an in-line booth or a stand-alone hospitality chalet, our approach is simple: we’re hands-on partners and honest collaborators who listen, design and build to your specifications — on strategy, on time, on budget. The bottom line is: When you arrive on site, you know it’s right. RESEARCH Our team is constantly working to utilize the newest trends in design and technology. DESIGN & CONSTRUCTION We'll help you build your booth from the ground up. SHOW SPECIFICATIONS We follow trade show rules and regulations to ensure you custom booth design meets all specifications. SHIPPING ASSISTANCE Our shipping partners and on-site team will make sure your shipments make it to your booth. GRAPHICS We receive the graphis you produce and ensure they are printed in the highest quality so your booth is set for success. AUDIO/VISUAL From flat screens to microphones, whatever you need, we can source. SET-UP & TEAR-DOWN Arrive on-site to a completed build and leave the clean-up to us! ON-SITE PROJECT MANAGEMENT We are at your event to provide on-site project management and take care of any last minute needs. UTILITY REQUIREMENTS Power, water or compressed air - whatever you need, we'll take care of it.

Digital mission engineering tools connect every stage of the engineering product lifecycle, from initial design to operation. They enable reality-based 3D simulation across multi-domain environments such as air, space, land, and sea by incorporating high-resolution terrain, satellite orbits, RF and radar systems, and sensor environments to accurately replicate real mission conditions. With accurate dynamics-based physical models at the core, these tools provide quantitative analysis of relative positioning between systems, changes in altitude and attitude, line-of-sight availability, and communication link status. Users can predict and evaluate mission elements such as sensor operations, communication links, platform maneuvers, and orbit optimization through scenario-based simulations.

Consists of a Data Transmission and Recording Unit (DTRU) for data transmission and collection, and a Removable Mass Memory (RMM) for data storage. Stores pre-planned flight mission data in the RMM on the ground and transmits it to the aircraft via the DTRU. Collects various mission data (flight data, monitoring data, video data, and audio data) during flight, stores it in the RMM, and transmits it to the ground for mission analysis. - x5 ARINC-818 Recording as H.264 - x2 Analog audio recording - x7 MIL-STD-1553B Bus Monitoring - x2 Gigabit Ethernet Monitoring - 512GB Solid-State Disk (up to 2TB) - Size : 160.1x146.0x232.4 mm - Weight : 4.25Kg - Power : MIL-STD-704F (28VDC, 58W) - Environment: MIL-STD-810G - EMI/EMC: MIL-STD-461G

Arm the Future Force with Battle-Tested Unmanned Systems FLIR offers several Unmanned Aerial Systems, ranging in size from the world's smallest nano-UAS to its Group 1 VTOL platform, which has more operational heritage than any other asset in its class.

It is a product produced in Korea and has high performance when used in EO/IR Gimbal for small drones. It can view both VIS and IR images simultaneously and is coupled to a small drone with a small weight to perform operations. Products with manufactured and domestic IR sensors in Korea. we deliver superior technologies that shape the future of defense. Whether supporting ISR missions or enhancing precision in loitering munition operations, MS60 products are designed to ensure operational excellence in the most challenging environments.

The CZ600IP is a high-performance un-cooled LWIR thermal camera engineered to deliver professional-grade imaging and system integration. With a 640x480 resolution and 12μm pixel pitch sensor, it provides exceptional clarity and detail, even in low-contrast environments. Its motorized focus and zoom control ensure smooth and accurate long-range observations, making it ideal for applications that demand both precision and flexibility. The camera’s wide temperature measurement range further enhances its utility, supporting reliable operation in industrial process monitoring, facility security, and advanced research projects.
Equipped with modern networking features, the CZ600IP supports Gigabit Ethernet connectivity, H.265/H.264 compression, and OnVif Profile S compliance, ensuring seamless integration with existing surveillance and monitoring systems. It also offers multi-streaming capabilities and advanced security protocols, allowing safe and efficient deployment in critical infrastructure. By combining robust imaging technology with flexible system compatibility, the CZ600IP stands out as a versatile solution that adapts to evolving customer needs while maintaining high reliability and accuracy.