GP division is producing Glass paper in the wet by glass fiber fabric as a main ingredient. Glass Paper has a dimensional stability, heat resistance, chemical resistance, electrical insulation, Print Processability, heat insultion and so on. Due to its advanced quality, the Glass Paper is used by many manufacturers globally for floorings, buildings, exterior electronics. Also, it is used for inorganic filter products, and diverse parts are under researching as its demands rise up.

Type : Radial (3P) Size(Ø, mm) : 82 × 58 Weight(kg) : 0.55 N. Speed(rpm) : 6,200 N. Torque(Nm) : 2 N. Power(kW) : 1.3

It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

The ENS2000 (Sub-6GHz 5G small cell) is a small cell capable of providing 5G services with a coverage radius of several hundred meters. It supports operator 5G bands such as n78 (3.5GHz) and n79 (4.7GHz) for private 5G. Originally developed for indoor use, but it can also be installed in enclosures such as streetlight cabinets for outdoor deployment when needed.

The ACTUS® ARKS18 (1–8X28mm FFP) Riflescope is built to deliver precision and durability, meeting the demands of professional users across diverse environments. Featuring a First Focal Plane (FFP) optical design, it ensures fast and accurate target coverage at any magnification level. The illuminated reticle provides smooth and reliable targeting, even in low-light conditions like dawn or dusk. Whether in dynamic or harsh environments, the ACTUS® ARKS18 is the ultimate riflescope to meet the needs of users who require top-tier performance when it matters most.

Electric motor used to drive the joint (WT axis) of the Explosive Ordnance Disposal (EOD) Robot.

Patria CANDL provides a single data link solution for communications requiring high reliability, such as UAS payload data and C2. It enables air-to-air and air-to-ground Ad Hoc Networking as well as relaying for BLOS capability, thus enabling capabilities such as MUMT - Manned UnManned Teaming and LVC – Live Virtual Constructive training. 8 Mbps data rate with additional safety features for C2, dynamic Ad Hoc Networking communication, motion video and digital voice capability are all integrated in one Software Defined Radio based compact airworthy terminal. Our CANDL covers NATO IV C-band as well as WRC 2012 defined civil UAS C2 frequency band in single housing enabling both military and civil UAS applications. Networking and range performance can be further extended with optional external HPA (High Power Amplifier) module. C2 & Payload Data Secure Command & Control for UAV platforms, payload and missiles Payload data (HD video, IR, SAR) for manned/unmanned platforms Distribution of situational awareness through networked data transfer for fighters Operation in GPS-denied environment Platform independent system (air, naval, ground) Legacy systems upgrade for enhanced performance Manned-Unmanned Teaming (MUMT) Force multiplier in hostile environment Multi-platfrom and swarming capability Mission distributed decision-making and co-ordination Optimisation of the role and performance of the platform on-the-fly Real-time communication through ad-hoc IP-network Live Virtual Constructive (LVC) Training Cost effectiveness utilising simulators and synthetic forces More demanding and easily scalable training scenarios Hiding warfighting tactics into secure digital environment Enabling complex training scenarios for manned and unmanned platforms Joint-networked, real-time communication between all Live, Virtual and Simulated assets