This miniature fin actuator manufactured by MPS Microsystems was designed based on customer specifications. Designed to guide a very small object and disposing of an extremely limited space, it meets strict requirements in terms of performance, weight - less than 100 g - and dimensions. To reduce the length of this actuator, MPS Microsystems used part of the screw length as the motor axis. This screw is equipped with a very compact 4-point contact bearing that simultaneously absorbs axial and radial loads. The angular play on the aileron axis is less than 0.1° rms. This actuator meets the storage and vibration requirements of military equipment.

Interconnect Wire Harness and Cable Assemblies are the connectivity backbone of electronic systems. Fabricated in a factory setting, build-to-print wire harness assemblies enable the OEM manufacturer to reduce the time and expense of in situ interconnection of electronic devices used in complex air, sea, land and space applications.

The maximum transmission distance varies based on the following frequency-related specifications. Camera Frequency Max Cable Length ================ =============== 20 ~ 60 MHz 10 m 60 ~ 80 MHz 7 m 80 ~ 85 MHz 5 m The PoCL Bypass function supports Power over Camera Link (PoCL) operation from the Frame Grabber to the selected camera. However, the power supply to unselected cameras is automatically disabled. To prevent power cutoff, separate power must be provided to the cameras. Configurations are available as follows, including image signal amplification. [Features of CLM-30C4]  Fully supports the Camera Link interface (Area/Line Scan).  Provides manual (switch) or remote (RS232) camera selection.  Allows selection from one of four cameras configured for Base (Layer 1) or Medium/Full (Layer 2) levels.  Supports Base/Medium/Full setups (CC1~4, RS232, LVAL, DVAL, FVAL)  PoCL bypass function: Automatically powers only the selected camera when PoCL-compatible cameras, frame grabbers, and cables are used.  Supports pixel frequency from 20 to 85 MHz.  Supports PoCL signal bypass (patented).  Enables lossless transmission.  Provides additional full-duplex RS232 communication at up to 256 Kbps.  Features a locking DC power jack (Molex).

# Key Features - Map Generation and No-Drive Zone Setting in Airports > Airport map/sensor fusion-based localization function > Function for defining main movement and standby areas > No-drive zone setting - Optimal Path Autonomous Driving Function > Destination-based optimal path navigation > Speed limit settings by path and area > Real-time location monitoring > Obstacle detection and immediate response > Driving on diverse road surfaces within designated areas - Real-Time Bird Detection and Bird Position/Direction Prediction > Real-time bird detection > Support for approximate bird position/direction prediction based on object detection algorithms > Updating of approximate bird position/direction prediction based on flock detection - Effective Bird Deterrence Reflecting Bird Characteristics > Playback of diverse (randomized) acoustic patterns - Real-Time Communication with Operator and Manual Control Function > Monitoring console (PC) provides real-time bird detection status and history > Display of approximate bird position/direction predictions on a map > Real-time video data sharing > Remote manual control - Smart Charging Function > Automatic return and charging when mission is complete or battery is low

Taktic buckle system for quick connect & release Antibacterial/FR treated padded spacer mesh system Poly mesh cummerbund for increased ventilation XFrame® Dynamic Load Carrige® compatible Compatible with our entire accessories line Flush admin chest pocket with internal elastic straps PALS webbing for MOLLE attachment Zipper for DS Assaulter's Zip-On Back Panels QASM buckle system Increased structural integrity and reduced rear deformation Internal plate pocket retention straps accommodate several different plate thickness Soft armor included Composition Material: 500D Cordura® + ARAMID/PV® Size : Small / Medium : 8.5" x 11.5” -9.3" x 12.3" Plate Pocket Front Panel Area of Coverage : Length 13.25” Width 11" Large / XLarge : 10" x 13"- 10.9" x 13.8” Plate Pocket Front Panel Area of Coverage : Length 15" Width 12" Colors: MC (MultiCam) BMC (Black MultiCam) BK (Black) RG (Ranger Green) CYT (Coyote Brown)

C-UAS and Advanced Threats70kW CBC HEL System

EDS is applied high-power LED light source to achieve fast target acquisition of shooter. With an efficient LED light source, EDS guarantees more than 50,000 hrsof operation time (Continuous use). EDS allows for better situation awareness and fast target engagement especially from non-standard shooting position. EDS can be used for hunting/recreational purpose.

The Boreas 50 fiber optic gyroscope (FOG) is a highly accurate and reliable navigation technology. It’s the result of over 25 years of development in partnership with two research institutions. The gyroscope uses a closed-loop optical coil and an advanced spread-spectrum digital modulation technique to improve accuracy, stability, and reliability while reducing size, weight, power, and cost. Gyrocompass North-Seeking The Boreas range of fiber optic gyroscopes (FOGs) can determine heading without needing a Global Navigation Satellite System (GNSS) or a magnetometer. By sensing the Earth’s rotation, the system’s north-seeking algorithm can acquire an accurate heading. This is possible in static and dynamic conditions, even at high latitudes. Reliability Boreas 50 has been designed from the ground up for rugged reliability. Both the hardware and software are tested and certified to environmental and electromagnetic standards (MIL-STD 461 and MIL-STD 810H). The precision aluminum enclosure is waterproof and dustproof to the IP67 standard. The system is resilient to shock and vibration, allowing it to be used in extreme conditions. Industry-Leading SWaP-C The Boreas 50 FOG Series delivers industry-leading performance with a compact and lightweight design. Excelling in terms of Size, Weight, Power, and Cost (SWaP-C). Multi-Protocol Support The Boreas 50 features multiple interfaces, including Ethernet, CAN, RS232, 1PPS, RS422, and GPIOs. It supports industry standard protocols, including NMEA 0183, CANopen, 1PPS, and ANPP, as well as a wide variety of proprietary protocols. A rich, responsive embedded web interface provides full access to all of the device’s internal functions and data. Internal storage allows for up to one year of data logging.