This product is a test-rig to test the injection and function of various fuel (diesel oil, gas) objects of the main engine. This product model is made from slide fuel valve types of traditional diesel engines to latest dual fuel gas engines GI, GI, LGIP, LGIM/X-DFM, and ammonia fuel valve engines LGIA and X-DFA types, and we are directly doing everything from design to production. In accordance with the maintenance regulations recommended by Everllence and WIN GD, it is a product that tests the normal functionality of fuel injectors of main engine after disassembling, cleaning and reassembling of fuel injection valves.

Hydraulic top bracing is an attenuation device installed between the main engine and the hull of the ship to reduce thermal expansion and vibration from the main engine to natural frequencies. The operating principle is an automatic control operating system through in/out and on/off the operating range of the hydraulic top bracing according to the rpm of the main engine. The number of hydraulic cylinders per engine is typically 2, 4, 6 depending on the type of engine, up to 8 are installed if necessary, and 1~2 of control panels are installed.

NICKEL 200 / 201 Bars-Sheets and Plates-Tubes and Pipes MONEL® ALLOY 400 Bars-Sheets and Plates-Tubes and Pipes MONEL® ALLOY K-500 Bars INCONEL® Alloy 600 Bars-Sheets and Plates-Tubes and Pipes-Wire INCONEL® Alloy 601 Bars-Sheets and Plates-Tubes and Pipes-Wire INCONEL® Alloy 625 Bars-Sheets and Plates-Tubes and Pipes INCONEL® Alloy 625LCF® Sheets and Plates INCONEL® Alloy 693 Sheets and Plates-Tubes and Pipes INCONEL® Alloy C-276 Bars-Sheets and Plates-Tubes and Pipes INCONEL® Alloy 22 Bars-Sheets and Plates-Tubes and Pipes INCOLOY® Alloy 800 H / HT Bars-Sheets and Plates-Tubes and Pipes INCOLOY® Alloy 825 Bars-Sheets and Plates-Tubes and Pipes Titanium Grade 1 Strip Titanium Grade 2 Bars-Sheets and Plates-Tubes and Pipes Titanium Grade 7 Bars-Sheets and Plates-Tubes and Pipes

NILO® Alloy 36 Bars-Sheets and Plates-Tubes and Pipes-Strip-Wire NILO® Alloy 48 Bars-Strip INCONEL® Alloy 230 Bars-Sheets and Plates INCONEL® Alloy 600 Bars-Sheets and Plates-Tubes and Pipes-Wire INCONEL® Alloy 625 Bars-Sheets and Plates-Tubes and Pipes INCONEL® Alloy 718 Bars-Sheets and Plates INCONEL® Alloy X-750 Bars-Sheets and Plates INCONEL® Alloy HX Bars-Sheets and Plates-Tubes and Pipes INCOLOY® Alloy A-286 Bars-Sheets and Plates NIMONIC® Alloy 75 Bars-Sheets and Plates NIMONIC® Alloy 80A Bars-Sheets and Plates NIMONIC® Alloy 90 Bars-Sheets and Plates-Strip-Wire NIMONIC® Alloy 263 Sheets and Plates UDIMET® Alloy 188 Bars-Sheets and Plates UDIMET® Alloy L-605 Bars-Sheets and Plates Waspaloy® Sheets and Plates Titanium Grade 2 Bars-Sheets and Plates-Tubes and Pipes Titanium Grade 5 (6Al-4V) Bars-Sheets and Plates Material no. 1.4545.4 / 15-5PH Bars Material no. 1.4548.4 / 17-4 PH Bars Material no. 1.4546.9 Bars

With more than 33,000 delivered to date, CFM56® engines mainly power single-aisle commercial jets from Airbus and Boeing. The CFM56®, developing 18,500 to 33,000 lb of thrust, set a standard in this market. It owes its impressive success to exceptional performance and reliability, the result of the two partners' technical excellence.

Counter-UAS Solutions for Government & Defense

EMCORE’s exclusive photonic integrated chip (PIC) technology delivers improved reliability and repeatability. The precision non-ITAR GEO-FOG 3D Dual features two GNSS antennas on a fixed PTK baseline to offer increased heading, pitch, and roll accuracy for static and dynamic applications where a single antenna system can be problematic. This dual antenna INS is the best choice for systems requiring heading at start-up or in low dynamic conditions. Highlights Data rate 10x faster than other available systems Cutting-edge sensor fusion for dependable, precise navigation in a full array of applications and conditions Six degrees of freedom (DoF) IMU with integrated gyros and accelerometers Technology Details Photonic Integrated Chip Technology EMCORE’s new photonic integrated chip (PIC) technology reimagines FOG technology by replacing individual fiber components with an innovative integrated planar optic chip. This results in a FOG with PIC Inside™ that’s even more reliable and delivers superior repeatability unit-to-unit. With three of these integrated photonic gyros at its core, the P-1750 IMU enables the GEO-FOG to provide the safe, accurate performance autonomous platforms demand. Learn More DSP Technology EMCORE’s DSP electronics improve FOG performance in critical areas such as scale factor and bias vs. temperature, scale factor linearity, and maximum input rate. EMCORE’s exclusive DSP design overcomes the limitations of analog signal processing, eliminating temperature-sensitive drift and rotation errors. GEO•FOG Manager The GEO•FOG Manager is ideal when integrating EMCORE’s GEO•FOG 3D and GEO•FOG 3D Dual INS. Learn More Developer’s Kit for Rapid Integration The KVH FOG/IMU Developer’s Kit includes easy-to-use software to accelerate your IMU and FOG integration, development, and interface efforts.

Know who you are working with by searching the Consolidated Screening List. This list, maintained by the U.S. Government, discloses persons or entities have been denied export privileges or who raise a "Red Flag" that needs to be resolved before proceeding.