This unit(SOU) supplies sealing oil to prevent mixing of hydraulic oil and liquefied methanol gas inside of FBIV(Fuel Booster Injection Valve) when the main engine operates. SOU is divided into large bore main engine(60 bore over) and small bore main engine(50 bore below) type by the number of membrane accumulator. The main components consist of an oil tank, an electric motor, a hydraulic gear pump, an oil filter, a control block, accumulators, and various senses, transmitters and indicators.

To guarantee maximum safety and reliability, our DA 30 features a brushless motor and a contactless wear-free position sensor. This means maximum service life with the greatest‐possible power delivery and its design prevents electromagnetic emissions (EMI) caused by brush sparking. The housing made of saltwater‐resistant aluminum is HART‐coat treated, meets the IP‐67 standard for water and dust sealing and provides an integrated Sub‐D connector (MIL spec. circular connector or cable gland on request). Brackets integrated in the housing for horizontal and vertical assembly. 8‐fold, ball‐bearing supported, steel gear train, drive shaft with ANSI multi‐tooth. The DA 30 series can be equipped with a standard PWM input (Pulse Width Modulation) that has two different interfaces: a differential, galvanic isolated interface (Opto‐Coupler) and a single‐ended interface with CMOS levels that is also used to program the servo parameters. It includes analog position feedback to detect the drive shaft position. A differential RS‐422 PWM interface can be chosen instead of the opto‐coupled interface. The DA 30 with digital serial command interface (RS‐485) receives its commands via a CRC secured protocol. It can return not only the shaft position in digital format, but also several diagnostic data such as the level of the supply voltage, current consumption and the temperature of the motor and electronics in digital form (optionally also the humidity within the actuator case). These kind of diagnostic capabilities help to determine the health state of the actuators before, during and after deployment.

The KX1-3046 is an X-band high-power MMIC amplifier fabricated on the GaN-on-SiC process. It operates from 8.0 – 10.5 GHz and typically provides 30W saturated output power with power-added efficiency of 46%. The KX1-3046 can support military and commercial radar systems. It is matched to 50Ω with integrated DC blocking capacitors on both RF input and output ports. The KX1-3046 is 100% DC and RF tested on-wafer. It is available in chip form. **Key Features** - Frequency Range: 8.0-10.5GHz - Small Signal Gain: 28dB - High Pout: 30W - High PAE: 46% - DC bias: Vd=28V @Idq=0.6A - Pulsed Vg: PW=100µs, DC=10% - Chip size: 2.95x3.1x0.1mm  

The SDI170 IMU is designed for demanding, mission-critical, rugged environments and ideal for continuous use applications with no wear-out components, highly linear accelerometer performance and longer life compared to competing alternatives. It is constructed with EMCORE’s latest generation quartz gyros, quartz accelerometers, and high-speed signal processing to achieve outstanding precision performance. The solid-state quartz sensors and hermetically sealed IMU construction provide reliable MTBF and a 20-year operating and storage life. Continuous Built-in Test (BIT), configurable communications protocols, electromagnetic interference (EMI) protection and flexible input power compatibility make the SDI170 IMU easy to use in a wide range of higher-order integrated commercial and defense system applications.

Main advantages of the PBS ECS systems include the possibility of cooling, heating and ventilation in one system, minimal power consumption, ecological operation without the need for a coolant and a compact design. Specific applications of the ECS systems include light combat aircraft AERO L-159 ALCA, jet trainers AERO L-39NG and L-39 Albatros, etc.

In high-reliability industries such as aerospace, defense, and nuclear, embedded software is emerging as a core competitive advantage, driving increasing demand for systems based on safety certification. Ansys SCADE is a model-based solution that supports the entire lifecycle of safety-critical software—from design to certification—for applications such as flight control systems, engine controllers, and cockpit display systems (CDS). It ensures high reliability, real-time performance, and safety compliance required for the development of complex avionics systems. Key Features - Model-based embedded software development and automatic code generation - Compliance with aerospace safety certification standards such as DO-178C, ARINC 661, and FACE™

It can carry and deliver payloads of 5 to 10 kilograms, making it suitable for commercial and industrial logistics. The drone has been successfully tested in extreme environments, ensuring stable performance under harsh conditions. With its proven capability, PELICAN expands the possibilities of drone-based delivery solutions in both urban and remote areas.

To reduce aircraft development lead-time, Safran Engineering Services is specialized in quick design and engineering in full autonomy. Teams provide global loads for ground and flight maneuvers, follows the evolution of weight and center of gravity for aircraft components and support sales campaigns with weight & balance evaluation.