The engine is suitable for MALE AUVs. Available in pusher and tractor configurations. Digital interface for control and monitoring. Stable operation at high altitudes and high temperatures. Ability to run at cold temperatures below -30°C without preheating.

[LEO GNSS-R] Satellite : LEO RF Characteristics : GPS L1/L5, Galileo E1/E5a(option) Accuracy : Position ≤ 10m(3DRMS), Velocity : ≤ 1m/s Raw Data Accuracy : Pseudo-Range : 1m(RMS) Carrier-Phase : 10mm(RMS) Data Output Rate : 1Hz 1PPS Accuracy : Sync to GPS Time Data < 1us (1PPS Accuracy < 1.5us) TTFF : Cold Start ≤ 20min / Warm Start ≤ 10min Dara Interface : MIL-STD-1553B, RS-422(Data Interface) [GEO GNSS-R] Satellite : GEO RF Characteristics : GPS L1/L2C/L5, Galileo E1 Accuracy : Position :: ≤ 30m(3DRMS), Velocity : ≤ 1m/s Raw Data Accuracy : Pseudo-Range : 1m(RMS) Carrier-Phase : 10mm(RMS) Data Output Rate : 1Hz 1PPS Accuracy : 2us(RMS)/Sync to GPS Time Data TTFF : Cold Start ≤ 45min / Warm Start ≤ 20min Dara Interface : MIL-STD-1553B EEE Parts : ITAR Free Parts

AI Navigation Algorithm The Certus Mini range features Advanced Navigation’s revolutionary AI neural network sensor fusion algorithm. The algorithm was designed for control applications and has a high level of health monitoring and instability prevention to ensure stable and reliable data. High-Performance MEMS The Certus Mini range contains high performance MEMS sensors that are put through Advanced Navigation’s intensive 8 hour temperature calibration process. This provides the highest accuracy possible from this sensor class and outputs consistent accuracy over the full temperature range from -40°C to 85°C. Reliability The Certus Mini range has been designed from the ground up for mission-critical control applications where reliability is essential. Built using a safety-oriented real-time operating system, all software is designed and tested to high safety standards with fault-tolerance in mind. The Certus Mini range is designed, manufactured and tested to military standards. L1/L5 Multi Constellation RTK GNSS The Certus Mini N supports L1/L5 dual frequencies, and GPS, GLONASS, Galileo, BeiDou and NavIC constellations. Access to multiple constellations and frequencies provides enhanced accuracy, availability and performance even in difficult environments such as multi-storey urban canyons. The GNSS receiver has 10 mm position accuracy with real-time RTK or post-processed PPK. Extensive Interoperability Certus Mini seamlessly communicates with a wide range of industry standard protocols including NMEA 0183 and CANOpen making it easy to integrate into existing systems. Certus Mini effortlessly interfaces with ROS 1, ROS 2, and Ardupilot, streamlining your development processes for maximum efficiency and effectiveness.

This Military Field-Grade Uninterruptible Power Supply units are designed for the extreme environmental and demanding electrical conditions of Military/Aerospace applications. This UPS incorporates field proven high efficiency designs and rugged packaging technologies. This UPS units will accept a wide range of input voltage and frequency values while delivering a well-conditioned AC or DC output to the load. The use of lithium ion batteries permits the lowest profile and lowest weight solution in its power class. It is designed and manufactured in SynQor’s USA facilities to comply with a wide range of military standards. Options include two DC outputs, a DC input rated for military 28 VDC sources, and an electronic breaker on the AC output to permit fault-tolerant parallel operation for higher power and/or N+M systems.

Sung Jin’s Nano Miniature Connector is applied twist pin for low engagement and separation force. Nano Miniature connector has a .025 inch contact space, and #30AWG, #32AWG of wire sizes are accepted. Innovative contact system that allows current of 1AMP ensures excellent electrical performance and characteristics. Sung Jin C&T’s Nano D miniature connector is designed to meet MIL-DTL-32139 standards and guarantees excellent mating performance and environment.

Processor - NXP Quad Core PowerPC QorIQT2080 up to 1.8GHz - 6 DMIPS/MHz per core (up to 43,200 DMIPS@1.8GHz) - 128b AltiVecSIMD unit (up to 72 GFLOPs@1.8GHz) Memory - 4GB soldered 64-bit DDR3L SDRAM with ECC - 256MB 16-bit NOR flash - 64GB SATA NAND SSD - 512KB NvRAM Form Factor - 3U OpenVPX - Conduction-Cooled

Large size - Shell size 15


The HXB15 Connectors, featuring expanded beam technology, hermaphroditic connection, rugged construction for field deployment and hybrid configurations, have been designed for harsh environment applications such as military tactical communications, avionics, offshore systems, outside broadcast, mining and plant.

The expanded beam technology uses expanded and collimated beams to couple optical fibers without any contact. It could allow for optics to be used in areas that have been quite restrictive due to presence of damage or contamination at the fiber end. Hermaphroditic connector design enables fast deployment by daisy-chaining multiple cable segments. HXB15 connectors also enable transfer of electrical signal or power using hybrid insert configuration.

FEATURES
·Advanced expanded beam technology
· Rugged field deployable fiber optic connector
· Hermaphroditic interconnection
· 2 to 10 Optical Channels for Singlemode or Multimode
· Optical / electrical hybrid variants
· Custom configurations available
· Environmental sealing (IPX8)
· Very high resistance to vibration, shock, environmental effects, dust, and debris

Brazing is bonding two or more pieces of metal by means of flowing a filler metal between the joint interfaces at a temperature below the melting point of the base metal. The filler metal, upon cooling to the solid state, forms a strong metallic bond throughout the joined area. Through Dip-Brazing, RF Systems manufacture 1. Brazed Antennas 2. Brazed Waveguides 3. Brazed Divider / Combiner