Trade Search

Developed and manufactured by MPS Microsystems based on customer specifications, this lens actuator forms an essential component of a laser guidance system for unmanned flying objects. It enables 2 lens groups to be displaced individually over a total range of 48 mm and makes it possible to focus a laser over a distance of several kilometres. The main technical difficulty inherent to this actuator lies in meeting very stringent requirements for alignment between the two lens groups (< 10 µm) and in maintaining a very small tilt of the lenses over their entire stroke (lateral deviation < 2 µm). The key part making it possible to ensure such specifications is a frame machined by milling from an aluminium block, into which the 2 drive systems are fastened. These systems each consist of a Ø16 mm brushless motor and a Ø4 mm ball screw with an axial play of less than 5 µm. Backlash-free and frictionless sliding of the lens holders is ensured by standard L306 linear ball bearings manufactured by MPS Microsystems.

STIM300 is a small, tactical grade, low weight, high performance non-GPS aided Inertial Measurement Unit. It contains 3 highly accurate MEMS gyros, 3 high stability accelerometers and 3 inclinometers. The IMU is factory calibrated and compensated over its entire operating temperature range. STIM300 is a cost-effective ITAR free solution for systems that only had FOGs as an alternative when reaching for the performance level of that STIM300 can offer. Each axis is factory calibrated for bias, sensitivity and compensated for temperature effects to provide high-accuracy measurements. The unit runs off a single +5V supply and communicates via a RS422 interface. The use of a 32-bit RISC ARM microcontroller provides flexibility in the configuration, like choice of output unit, sampling frequency, LP filter -3dB frequency and RS422 bit-rate and protocol parameters. For more advanced users, STIM277H may be put in Service Mode. In this mode all the configuration parameters can be temporarily or permanently changed by overwriting the current settings in the flash memory. Service Mode also provides the ability to perform single measurements, perform diagnostics and obtain a higher detail in the status byte.

NO MELT, NO DRIP (50/50 NYLON COTTON) Incorporated ventilation system and COOLMAX & Mesh fabrics to ensure comfort and breathability Multi-pattern round processing for free movement Velcro® webbing for MOLLE attachment to support scalability Chest and sleeve side pockets to improve storage convenience Use MIL-SPEC threads and YKK zippers Composition Material : NYLON 50% / COTTON 50%, COOLMAX, MESH Size : 95~115 Colors MC (MultiCam) BMC (Black MultiCam) BK (Black) RG (Ranger Green) CYT (Coyote Brown)

Patria CANDL provides a single data link solution for communications requiring high reliability, such as UAS payload data and C2. It enables air-to-air and air-to-ground Ad Hoc Networking as well as relaying for BLOS capability, thus enabling capabilities such as MUMT - Manned UnManned Teaming and LVC – Live Virtual Constructive training. 8 Mbps data rate with additional safety features for C2, dynamic Ad Hoc Networking communication, motion video and digital voice capability are all integrated in one Software Defined Radio based compact airworthy terminal. Our CANDL covers NATO IV C-band as well as WRC 2012 defined civil UAS C2 frequency band in single housing enabling both military and civil UAS applications. Networking and range performance can be further extended with optional external HPA (High Power Amplifier) module. C2 & Payload Data Secure Command & Control for UAV platforms, payload and missiles Payload data (HD video, IR, SAR) for manned/unmanned platforms Distribution of situational awareness through networked data transfer for fighters Operation in GPS-denied environment Platform independent system (air, naval, ground) Legacy systems upgrade for enhanced performance Manned-Unmanned Teaming (MUMT) Force multiplier in hostile environment Multi-platfrom and swarming capability Mission distributed decision-making and co-ordination Optimisation of the role and performance of the platform on-the-fly Real-time communication through ad-hoc IP-network Live Virtual Constructive (LVC) Training Cost effectiveness utilising simulators and synthetic forces More demanding and easily scalable training scenarios Hiding warfighting tactics into secure digital environment Enabling complex training scenarios for manned and unmanned platforms Joint-networked, real-time communication between all Live, Virtual and Simulated assets

SNT Motiv created the 'K Series', the strongest infantry firearm boasting the highest accuracy and destructive power, through pure independent technology development, and is fulfilling its mission of national security as the first line of independent national defense.

Ultra-High Accuracy MEMS Certus Evo features some of the highest accuracy MEMS accelerometers and gyroscopes currently available. Certus Evo’s inertial performance exceeds some FOG IMUs and is up to 100x smaller and 10x cheaper. Certus Evo is put through Advanced Navigation’s intensive calibration process to provide consistently accurate data over an extended temperature range of -40°C to 85°C. AI-Based Algorithm Certus Evo features Advanced Navigation’s revolutionary AI neural network sensor fusion algorithm. It was designed for control applications and has a high level of health monitoring and instability prevention to ensure stable and reliable data. Dual Antenna RTK GNSS Certus Evo contains a dual frequency RTK GNSS receiver that provides up to 1 cm accuracy positioning and supports all of the current and future satellite navigation systems, including GPS, GLONASS, GALILEO, BeiDou and QZSS. Dual antenna heading provides high accuracy heading that is not impacted by magnetic interference and has no motion requirements. Time Synchronization Certus Evo contains a GNSS disciplined oscillator that can act as the primary time source within a distributed time system, enabling access to ultra-accurate system time using PTP or NTP network time sync. Certus also has a high-accuracy 1PPS and frequency output. Multi Protocol Support Certus Evo features multiple interfaces including Ethernet, CAN, RS232, RS422 and GPIOs. Certus supports all the industry standard protocols including NMEA 0183, NMEA 2000, TSS, PASHR, Simrad as well as a wide variety of proprietary protocols. It features a rich web UI and 256GB of internal logging.