It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

Quadro expands the capabilities of Exolaunch's microsatellite separation systems with a four-point offering tailored to match the Arrow 150 satellite with masses up to 250 kg. It is currently the only separation system which is qualified to fly the Arrow 150 platform on the SpaceX Transporter missions. Quadro was crowned the most innovative separation system in Europe by winning the Innovation in Space Award 2023 at the European Space Summit, celebrating its unique blend of flight-proven technology and cutting edge four-point design securing access to orbit for the next generation of microsatellite buses.

1. Battery Pack with Battery Management System (BMS) • High energy density cells, Rapid charge/discharge • State Estimation Technology, Multiple Sensing & Sensor Fusion • Thermal management design, Overcharge/overdischarge protection circuits • Real-time Diagnostics, Safety Compliance through Anomaly Detection 2. Hydrogen Fuel Cell Power Pack (1.6kW/3.5kW) • Patented Core Technology • Smart Energy Blending - High Energy Efficiency • Rapid Hydrogen Fueling 3. Energy Storage System (ESS) • Energy Efficient • Stable Power Supply of the Grid • Sensing & Diagnostics

Low Size, Weight and Power (SWaP) at only 297g. Up to 100 TOPS GPU by NVIDIA® Jetson Orin™ NX Supports multiple camera and sensor interfaces 2x GbE and 2x USB3 for RGB/ Infrared/ hyperspectral cameras and lidar/ radar 2x GMSL2 for HDR/ 3D cameras Built-in UART and CAN to interact with flight controller 1x M.2 2230 for storage and 4G/5G communication ready Supports 4S-14S drone battery pack Compatible GMSL2 cameras with pre-built drivers

- Long life and precise movement control through fine-tuning - Shaft diameter 5mm~ - Accuracy G3~G7 - Shaft length differs depending on material, size, accuracy of shaft - Efficiency 85% or higher

PBS' best-selling jet engine. It has achieved worldwide success, having been sold in over 40 countries. It is currently in use in over 1,000 applications around the globe. Compact design, low weight and low fuel consumption in the given power category. Fuel lubricated version PBS TJ100P also available.

The SDI170 IMU is designed for demanding, mission-critical, rugged environments and ideal for continuous use applications with no wear-out components, highly linear accelerometer performance and longer life compared to competing alternatives. It is constructed with EMCORE’s latest generation quartz gyros, quartz accelerometers, and high-speed signal processing to achieve outstanding precision performance. The solid-state quartz sensors and hermetically sealed IMU construction provide reliable MTBF and a 20-year operating and storage life. Continuous Built-in Test (BIT), configurable communications protocols, electromagnetic interference (EMI) protection and flexible input power compatibility make the SDI170 IMU easy to use in a wide range of higher-order integrated commercial and defense system applications.

Haigh-Farr has been serving the United States Department of Defense and associated defense contractors for the last 50 years with pride. In fact, the first antenna design ever developed by Haigh-Farr was engineered for a tactical weapon meant to protect the lives of American war fighters; and a variant of that antenna is still being delivered and deployed to this day.