Low Insertion Loss, Good IMD Performance RF Coaxial Switches: SPST to SP8T Switches, Transfer Switches from DC to 200 GHz Power Dividers and Power Combiners Wilkinson Types from 2 to 16 Ways Frequency Range from 400 MHz to 26.5 GHz

PELICAN-D JT is a MWIR detector for missile applications. The FPA is InSb based, having digital Readout Integrated Circuit (ROIC) in a format of 640 x 512 with 15μm pitch. Pelican-D JT has a unique structure of Dewar which enables very fast cool down time and hence quick mission readiness using Joule-Thomson (JT) cooler. Due to the low heat load on the focal plane, the detector achieves long mission duration. The Detector can be supplied with a proximity board which provides Camera Link interface to the customer system. This highly simplifies the integration of the detector to the system.

Introducing the FoldIR 30-450mm f/3.4 continuous zoom lens with Ophir's innovative folded optical design, offering lightweight, compact design while maintaining long optical lengths and improved tolerance sensitivity. This design ensures exceptional performance even in challenging environments, addressing stabilization and athermalization issues. Its unique f/3.4 aperture guarantees superior image quality, surpassing larger aperture zoom lenses in diffraction limit MTF and IR signal collection. The lens features a built-in mechanical shutter for NUC control, enhancing image quality through Ophir's control system. Weighting under 2kg, offering an impressive detection range of over 20km, and a horizontal field-of-view of 26.9º (WFOV) and 1.7º (NFOV). This compact, lightweight, long-range, high-performance lens is the ultimate selection of for optical air-land-sea optical gimbals and payloads. Key features include: • Efficient folded optics design for min. volume use • Physical shutter for NUC • Designed for MWIR 10μm SXGA sensors • For air-sea-land gimbals and payloads • Weight <2kg • Detection range >20km • HFOV 26.9º WFOV/ 1.7º NFOV

The mRO-50 Ruggedized is a breakthrough microwave optical double resonance (MODR) low SWaP-C Miniaturized Rubidium Oscillator designed to meet the latest commercial, military and aerospace requirements where time stability and power consumption are critical. It provides a one day holdover below 1µs and a retrace below 1E-10 in a form factor (50.8 x 50.8 x 20mm) that takes up only 51 cc of volume (about one-third of the volume compared to standard rubidiums) and consumes only 0.36W of power, which is about ten times less than existing solutions with similar capabilities. The mRO-50 Ruggedized Oscillator provides accurate frequency and precise time synchronization to mobile applications, such as military radio-pack systems in GNSS-degraded or denied environments. Its wide-ranging operating temperature of -40° to +80°C is also ideal for: Underwater Applications, Military Communications, Radars, Low Earth Orbit, Electronic Warfare, Airbornes & Avionics, UAV/UGV/USV/UUV

SAF-FIRES™ is a standards-based, image generator agnostic, and scalable Call-For-Fire and Close Air Support training simulation with autonomous Smart Trainer suitable for deployment in Joint Fires and accreditable JTAC training simulators. Built upon the same Call-For-Fire and Close Air Support software engine that powers the accredited simulation Fires FST™, SAF-FIRESTM delivers the same mature and complete Joint Fires training solution but makes it available for integration with any DIS, HLA or CIGI compatible simulation or Image Generator. Supporting both conventional near-peer and counter-insurgency operational scenarios, SAF-FIRES™ enables JFOs and JTACs to train realistically in a modern complex battlespace against an agile and adaptive adversary. Heightened realism and cognitively challenging training are enabled through the incorporation of non-combatants, urban clutter, UAV surveillance, various close air support platforms and accurate military targeting procedures.

DS AETHER CT provides various industrial Gas Tube Skids such as Hydrogen (H2), Helium (He), Neon (Ne), Nitrogen (N2) and Argon (Ar) as well as CNG. The working pressure is set to national requirements or customer's demands. The color of the jumbo tubes and skid frames follows ISO color codes or the designations of customers.

Relief Valve ensures high flow rate compared to competitor market designs. Climb/Dive Valve is a pressure equalizing solution for enclosed volumes that experience pressure differential levels between the internal and external pressure values of the system. Ball Valve is very commonly used on UAV and land systems. It is available with high torque and low torque actuation. Materials, sizes, end connects customizable.

Highest Productivity with reliable part quality • Maximize productivity by using up to 4 lasers, advanced scanning strategies and bidirectional recoating. • Maintain reliable part quality by using uniform gas flow and precise 3-axis scanner motions. • All features are designed with minimizing the cost per part in mind to maximize your profitability. Automation of processes and minimize job to job time. • For increased operational efficiency, powder handling, powder sieving are optimized. • The job to job time is minimized by using exchangeable build containers. Best in class volume • Offering uninterrupted 24/7 series production utilizing the segment‘s largest build volume and sophisticated powder management. • This allows for printing of a wide range of mid to large size fully functional components. Easy to Print with a wide range of materials • DLX enables the production of highly precise and high-quality printed parts with a wide range of materials. • Standard materials are Aluminium, Titanium, Copper, Inconel, Maraging Steel, Stainless Steel and more.