- Expandable Mobile Medical Hospital Shelter is easy to transport, quick to install, and flexible in design for rapid response to every medical need at the site of the disaster. - easy to deploy medical facility to the site.

REP series is easy to use for quick mating. The REP panel and cable connectors are a highly cost-effective interconnect system, which solves the constant need for simple and reliable connector solutions in rail applications. A full plastic solution offered in either wire attachment or PCB mounting options to provide rapid assembly installation without requiring additional mounting hardware. Cable receptacle connectors are available to mate with the cable plug connectors for cable-to- cable solutions when needed. The series is qualified to French and European rail standards. The connectors are available as one overmolded plastic part to save assembly time.

At trade shows around the world, Kallman’s flagship service, the Partnership Pavilion, is America’s full-service, business-to-business headquarters; the on-site hub of the U.S. and Canadian export community. The Partnership Pavilion covers Aerospace; Defense; Maritime; Medical; Mining; Oil & Gas; and Food industries. The Pavilion presents the perfect platform for business, maximizing U.S. and Canadian exhibitor exposure and creating a networking forum. Prime exhibit space & quality designs: Built on the idea that an organized group of exhibitors is easier to find than stand-alone booths scattered throughout a show, the USA and Canada Partnership Pavilions always attracts a crowd. Professional Amenities and Staff: Every USA and Canada Partnership Pavilion is staffed by an experienced event team dedicated to your success. Whether you need a liaison to the organizers, tech support, a contractor, caterer, translator, printer, or help tracking down a shipment... we’re here to help. Exclusive events and programs: As an exhibitor you have exclusive access to all Partnership Pavilion events; including our Opening Ceremony and Ribbon-Cutting, off and on-site hospitality receptions, business and market insight briefings, and special presentations.

STIM300 is a small, tactical grade, low weight, high performance non-GPS aided Inertial Measurement Unit. It contains 3 highly accurate MEMS gyros, 3 high stability accelerometers and 3 inclinometers. The IMU is factory calibrated and compensated over its entire operating temperature range. STIM300 is a cost-effective ITAR free solution for systems that only had FOGs as an alternative when reaching for the performance level of that STIM300 can offer. Each axis is factory calibrated for bias, sensitivity and compensated for temperature effects to provide high-accuracy measurements. The unit runs off a single +5V supply and communicates via a RS422 interface. The use of a 32-bit RISC ARM microcontroller provides flexibility in the configuration, like choice of output unit, sampling frequency, LP filter -3dB frequency and RS422 bit-rate and protocol parameters. For more advanced users, STIM277H may be put in Service Mode. In this mode all the configuration parameters can be temporarily or permanently changed by overwriting the current settings in the flash memory. Service Mode also provides the ability to perform single measurements, perform diagnostics and obtain a higher detail in the status byte.

It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

A-29 SUPER TUCANO

Our software enables engineers to analyze and optimize their preliminary designs in the best way possible – at the whole aircraft level – which not only saves time but money as well. With its Multi-disciplinary Analysis and Optimization (MDAO) approach, you can model aircraft and their subsystems, assess performance, and generally accelerate your progress in numerous design challenges. Whatever your aircraft preliminary design goals may be, Desmo has a solution.

Processor - 64-bit Quad Core PowerPC QorIQT2080 up to 1.2GHz - 6 DMIPS/MHz per core (up to 28,800 DMIPS@1.2GHz) - 128b AltiVecSIMD unit (up to 38.4 GFLOPs@1.2GHz) Memory - 4GB soldered 64-bit DDR3L SDRAM with ECC - 256MB 16-bit NOR flash - 64GB SATA NAND SSD - 512KB NvRAM Form Factor - 6U VME - Conduction-Cooled, Air-cooled support