1. Integrate the most effective aspects of Visible and IR(Infrared) image. 2. Increase the efficiency through the ability to use in all weather conditions, day or night, including fog.

- Installed on the fuselage or tail to provide flash lighting in a location that does not impede the visibility of position lights - The reflector rotates in an arc. - Flash Rate : 40 to 100 times per minute [cycle] - Effective Intensity : FAA FAR 29.1401 - SAE ARP 5825A

The PANDION Q450 is a modular drone that allows users to swap out its detachable D-ARK module pack, enabling flexible configurations of cameras and internal PCBs. As the drone industry diversifies, users can select purpose-specific module packs, allowing a single product to meet various consumer needs with multiple configurations. The D-ARK module pack integrates the camera, flight controller (FC), and all circuitry, allowing users to upgrade, modify specifications, or perform maintenance simply by swapping the module. Designed to offer an optimized configuration for a wide range of users, this modular system provides a cost-effective solution tailored to diverse needs in the drone industry. PANDION Q450 has a solid design with water and dust resistance for rugged environments.

It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

Our ultra-premium DB961WP answers the call for increased durability, providing the dependability and reliability industrial applications demand. Coupling massive torque and high speed with its wide voltage range and high resolution/low deadband circuitry, this hardened steel gear, fully programmable actuator delivers the ultimate in high performance. #UAV #UAS #UGV #UUV #USV

The maximum transmission distance varies based on the following frequency-related specifications. Camera Frequency Max Cable Length ================ =============== 20 ~ 60 MHz 10 m 60 ~ 80 MHz 7 m 80 ~ 85 MHz 5 m The CLR-30 amplifies and transmits Camera Link signals in Base/Medium/Full configurations (up to 10 Taps supported) from a camera to a PC frame grabber. Key Features  Fully supports the Camera Link interface (Area/Line Scan).  Supports Base/Medium/Full setups (CC1~4, RS232, LVAL, DVAL, FVAL).  Supports pixel frequency from 20 to 85 MHz.  Supports 10 Taps cameras.  Enables lossless transmission.  Provides additional full-duplex RS232 communication at up to 256 Kbps.  Supports PoCL signal bypass (patented).  Features a locking DC power jack (Molex) and SDR connectors.  Compact size compared to previous models.

24-7 non-stop operating RADAR for ceaseless aerial surveillance and early trajectory detection. Design and Manufacture - Antenna Housing - Driving Unit

1. Fixed Wing Aircraft MRO/Mod./Upgrades area 2. Starting with KAI’s military depot level maintenance program, 3. From providing service to KAI’s indigenous platform, Upon cooperation with global OEMs, KAEMS is capable of delivering various types of military solution with quality. [Military Business] - ROKN P-3CK Depot level maintenance - ROKAF E737 AEWCS Modification - F-16 US Airforce Depot level maintenance - KF-16 ROK Airforce Ram Coating Program - Training Jet T-50 FWD Fuselage Assemble