With a peak torque of >200Nm / 1770 lbf-in and a rated torque of 80Nm / 708 lbf-in, the fully redundant DA 58-D is the strongest, electromechanical, fully integrated (actuator control electronics, position sensing, motor and drivetrain in one housing) actuator in the market. Besides the well-proven redundant RS 485 interface, the DA 58-D also features a redundant CAN bus interface. The DA 58-D has been developed for applications with the highest reliability demands. The redundant – two channel – design of the actuator allows continuous operation even if one of the two channels has failed. All major components such as the electric motors, control and communication electronics, and power supply are available twice (redundant). The actuator features a triple-redundant position sensor (2 out of 3 voting). Additionally there are several sensors integrated to provide diagnostic information such as current consumption, supply voltage levels and temperature readings. All major components of the actuator are continuously diagnosed by the microcontrollers of the actuator and its health status can be read via the redundant RS485 / CAN interface.

R HUGHES' Ca-Zoom PTZ 140 is a Pan-Tilt Zoom Camera inspection equipment equipped with the Ca-Zoom® 6.2 system. This equipment is capable of a total of 432x zoom with 36x optical zoom and 12x digital zoom, increasing inspection efficiency. In addition, two high-performance 35W lights are installed in the light source to enable more smooth inspection. The inspection technology of the PTZ Camera Ca-Zoom® line of products makes them ideal for inspecting large areas that are difficult for humans to access, such as tanks, vessels, pipelines or nuclear power plants.

FIRSTEC is providing key components of guided weapon, such as Actuation System, Gudiance Control Unit, Fire Control Unit, and wire harness, to complete systems such as Hyunmoo, Raybolt(Hyungung), Bigung(Poniard), M-SAM II(Cheongung II), L-SAM etc. applying them to each business.

Expert sourcing and pricing Cost modeling: Cost per Flight Hour, FFP, EEQ Import/Export classification: ECCN, ITAR, Schedule B Logistics and supply chain analysis Technical review of parts lists and breakdowns Source development and sustainment

STIM300 is a small, tactical grade, low weight, high performance non-GPS aided Inertial Measurement Unit. It contains 3 highly accurate MEMS gyros, 3 high stability accelerometers and 3 inclinometers. The IMU is factory calibrated and compensated over its entire operating temperature range. STIM300 is a cost-effective ITAR free solution for systems that only had FOGs as an alternative when reaching for the performance level of that STIM300 can offer. Each axis is factory calibrated for bias, sensitivity and compensated for temperature effects to provide high-accuracy measurements. The unit runs off a single +5V supply and communicates via a RS422 interface. The use of a 32-bit RISC ARM microcontroller provides flexibility in the configuration, like choice of output unit, sampling frequency, LP filter -3dB frequency and RS422 bit-rate and protocol parameters. For more advanced users, STIM277H may be put in Service Mode. In this mode all the configuration parameters can be temporarily or permanently changed by overwriting the current settings in the flash memory. Service Mode also provides the ability to perform single measurements, perform diagnostics and obtain a higher detail in the status byte.

Brazing is bonding two or more pieces of metal by means of flowing a filler metal between the joint interfaces at a temperature below the melting point of the base metal. The filler metal, upon cooling to the solid state, forms a strong metallic bond throughout the joined area. Through Dip-Brazing, RF Systems manufacture 1. Brazed Antennas 2. Brazed Waveguides 3. Brazed Divider / Combiner

MIL-DTL-26482 seriesⅡ has the same contact arrangement as MIL-DTL-26482 series I, and the bayonnet coupling method is applied. The connection between the contact and the wire is a crimping method, which is different from 26482-I. It provides reliable fastening with 5 guide keys. It also has excellent EMI shielding ability and can be used with various additional parts of the M85049 standard, so it is applied to aviation, space, and various high-tech precision equipment.

# Key Features - Map Generation and No-Drive Zone Setting in Airports > Airport map/sensor fusion-based localization function > Function for defining main movement and standby areas > No-drive zone setting - Optimal Path Autonomous Driving Function > Destination-based optimal path navigation > Speed limit settings by path and area > Real-time location monitoring > Obstacle detection and immediate response > Driving on diverse road surfaces within designated areas - Real-Time Bird Detection and Bird Position/Direction Prediction > Real-time bird detection > Support for approximate bird position/direction prediction based on object detection algorithms > Updating of approximate bird position/direction prediction based on flock detection - Effective Bird Deterrence Reflecting Bird Characteristics > Playback of diverse (randomized) acoustic patterns - Real-Time Communication with Operator and Manual Control Function > Monitoring console (PC) provides real-time bird detection status and history > Display of approximate bird position/direction predictions on a map > Real-time video data sharing > Remote manual control - Smart Charging Function > Automatic return and charging when mission is complete or battery is low