It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

Developed and manufactured by MPS Microsystems based on customer specifications, this lens actuator forms an essential component of a laser guidance system for unmanned flying objects. It enables 2 lens groups to be displaced individually over a total range of 48 mm and makes it possible to focus a laser over a distance of several kilometres. The main technical difficulty inherent to this actuator lies in meeting very stringent requirements for alignment between the two lens groups (< 10 µm) and in maintaining a very small tilt of the lenses over their entire stroke (lateral deviation < 2 µm). The key part making it possible to ensure such specifications is a frame machined by milling from an aluminium block, into which the 2 drive systems are fastened. These systems each consist of a Ø16 mm brushless motor and a Ø4 mm ball screw with an axial play of less than 5 µm. Backlash-free and frictionless sliding of the lens holders is ensured by standard L306 linear ball bearings manufactured by MPS Microsystems.

1. 용도 : 차량의 엔진동력을 이용하여 요구하는 전력을 생성하는 장치 2. 기능 : 정격출력 10kW, 3상 140V~560V 생성 3. 관련 장비/체계 분야 : 30밀리 자주대공포(비호복합), 단거리지대공무기(천마) 4. 관심 협업 분야 / 목표시장(국가) - 전차ㆍ장갑차 그 밖의 전투기동장비 / 국내 방위산업시장 및 해외 (미국, 멕시코, 프랑스, 이스라엘, 인도네시아, 말레이시아, 아랍에미리트, 유엔국 등) 5. 기타사항 - 영구자석 기반 발전기 기술 및 고효율 에너지변환 기술(특허보유) - 국방규격화 완료, 해외수출 경쟁력 제품

The Haigh-Farr family of rugged Blade antennas is available in frequencies ranging from UHF to upper C-band. Since 1972, our blade antennas have a demonstrated reliability of use in high-performance airborne applications. In addition, they are used extensively in ground-based vehicles such as race cars, trucks, tanks, and motorcycles, to name a few. 60XX & 61XX Series: Our 60XX & 61XX Series blade antennas have quasi-uniform null-free hemispherical gain patterns and may be provided in either straight or rounded blade configurations. 60XX and 61XX Series blade antennas are available in standard and high powered versions. With sufficient airflow, our standard blades handle an average power of 25 - 30W CW and our High Powered blades can handle an average power of 80W CW. These blade antennas share a common footprint with varying height. Multiband: Haigh-Farr Multiband blade antennas utilize identical materials and construction as our 60XX & 61XX series blade antennas with additional bandwidth. UHF: Haigh-Farr UHF blade antennas provide coverage down to 380 MHz and up to 470 MHz in two unique form factors. Our 6300-X series of blade antennas utilize identical materials and construction as our 60XX & 61XX series blade antennas in the larger blade structure required at UHF-band. Our P/N’s 16230-XXX and 16400-XXX are low profile, mechanically robust designs that can be custom tuned to meet discrete UHF frequencies, with an option to add thermal protection for high temperature environments.

Long-Endurance VTOL Aircraft with an Aerodynamic Design for Maximized Energy Efficiency. Equipped with Communication Systems and EO/IR Surveillance Cameras, it can fly up to 3 Hours of Mission Operation. Comes with a EO/IR Camera as Standard, and can be customized to carry payloads such as a Surveying LiDAR or Camera (≤1kg) based on customer requirements. Application : Take off/Landing on Moving Vessels, Aerial Surveying, Reconnaissance, Payload Drop (Grenade, Cargo, etc.)

Haigh-Farr designs support hardware to work hand-in-hand with our solutions to maximize performance. Our support hardware utilizes the same well-proven construction as the antennas they support. Power Dividers, Combiners, Hybrids & Diplexers

We carry a wide range of aerospace-grade materials in round bar, including: -Alloy 718 (AMS5662, AMS5663) -Alloy 625 (AMS5666) -Alloy X (AMS5754) -Titanium Grade 5 (AMS4928) -A286 (AMS5732, AMS5737) -17-4PH (AMS5643) -17-4PH H1025 (AMS5643) -321 Stainless Steel (AMS5645) There is no minimum order quantity ? we can cut from a single piece and ship within 1?2 days, complete with full material traceability. For non-stock grades, shapes, and standards, we can source materials from suppliers worldwide with a lead time of approximately 2 weeks, also with no minimum order quantity.

Our product range includes caps, chains, adapters, and locknuts, all manufactured through advanced CNC machining to ensure long-lasting performance even under frequent assembly and disassembly. These accessories are widely applied in electronics, aerospace & defense, and medical devices, where durability and reliability are critical. With the ability to provide customized designs and precision machining, we guarantee consistent quality, fast delivery, and compatibility with international standards, earning long-term trust from global clients.