Our products serve the clients in military and aerospace industries, who require high performance with strength and ability to perform at extreme temperatures and pressures.

[Cutting by water jet] Micro water jet cutting: The micro water jet enables a refined process to be carried out in precision cutting. This high-precision technology reduces the jet diameter by a factor of 5 and makes water jet cutting more precise by a factor of 10. The micro water jet achieves a cutting accuracy of +/- 0.01 mm and a positioning accuracy of ±0.005 mm. The proven advantages of the cold cutting process remain unchanged. In the pure water process, the cutting width was reduced to 0.2 mm in the abrasive process for hard materials such as nickel-based alloys and titanium. The new technology controls the cutting process and manipulates the cutting path depending on the contour and speed enabling a highly precise cut. Standard waterjet cutting: Water jet cutting is highly efficient and at the same time less severe than other cutting techniques. Low process forces and thermal loads prevent bending or melting. We can cut filigree delicate contours from practically all nickel alloys and titanium alloys. Using our standard process we can cut a range of shapes and dimensions according to customer requirements and drawings and achieve tolerances of +/- 0.1 mm or +/- 0.2 mm.

The ACTUS® IR Flashlight emits a low output of less than 100mW with a wavelength range of 830 to 875 nm, classified as a Class 3B laser. Designed for reliable performance in extreme environments, it can withstand specific storage and operating temperature ranges. Powered by a single CR123A lithium battery, it offers extended operational time, while its robust 6061-T6 aluminum construction ensures durability. The lightweight, compact design makes it easy to carry and use in the field.

The D56M differential pressure switch provides high precision measurement across a wide range of low-differential pressure conditions in a package smaller than other units of comparable capability. The membrane senses changes between the “high” and “low” pressure inlets while offering excellent repeatability and high cycle life. Optional hermetically sealed contacts mean the D56M can be well suited when vapor ignition is a concern.

Typical uses include airflow control plenums.

For a similar switch with a higher resistance to shock and vibration, refer to the D16M

For qualification information, please consult the sales or engineering departments.

Features

Intended for gaseous media
Environmentally sealed with optional hermetically sealed contacts
Proven diaphragm and leaf spring technology for high cycle life

In order to guarantee the quality required by customers based on excellent quality and productivity, we practice close quality control through SQ and IATF16949 certifications and devote ourselves to put all of our capabilities so that we would earn customers’ recognition.

ABC designs and develops many components or functions to best meet the requirements of the needs in the special functions required in the test facilities. Essentially, these are hydraulic components that cover all types of fluids from very low pressure to very high pressure in a very wide scope of flow ranges.

It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

Powered by a single CR123 lithium battery, the ACTUS® ALD-1 Laser Sight offers 4 to 9 hours of runtime, depending on usage. Its robust all-aluminum housing ensures exceptional durability, while its compact size, similar to a standard deck of playing cards, makes it highly portable and convenient. The IR and visible lasers are optically paired, streamlining the zeroing process for quick, accurate adjustments and enhanced ease of use.