Mixed Signal Oscilloscope (4) Analog Channels, 10M record length, Certificate of Traceable Calibration Standard

It is a system that performs missions such as monitoring, surveillance and reconnaissance by ejecting and launching a foldable fixed-wing drone from the canister(tube) launcher. It is equipped with EO/IR Cameras (Electro-Optical / Infra-Red), which are mission equipment for reconnaissance, so that effective day and night image information can be collected. The gathered image information is transmitted to the ground control system (GCS) in real time while detecting and tracking the target by applying AI-based image processing technology. The foldable fixed-wing UAV has a simple structure and light weight, so it can be stored and transported in the canister launcher, and can be operated immediately so that it can be operated without time delay, and if necessary, the air vehicle can be retrieved and re-used by using a net-type recovery system.

The IMX-5 delivers Tactical Grade Inertial performance powered by TWO of the most powerful GNSS receivers on the market. Inside the aluminum enclosure, this sensor is prepared to take you through difficult terrain. The IMX-5 provides sensor fusion for roll, pitch, magnetic heading, velocity, RTK precision position and Dual GNSS Compass Heading. Features Tactical Grade IMU Dual Onboard Multi-Frequency (L1/L2) GNSS Receivers Dual GNSS Compassing RTK Centimeter Level Precision Rugged IP40 Aluminum Enclosure Gyro: 1.5 °/hr Bias Instability, 0.16 °/√hr ARW Accel: 19 µg Bias Instability, 0.02 m/s/√hr VRW 0.04° Dynamic Roll/Pitch 0.13° Dynamic Heading Fast Integration with SDK and Example Software Data Logging (SDK and Application Software)

Gas-to-liquid heat exchangers, also known as air-to-water or water-to-air heat exchangers, are critical in high-performance environments where efficient thermal management determines reliability and output. They are widely used in applications such as engine charge air cooling, exhaust gas heat recovery, avionics thermal control, cryogenic fluid conditioning, and high-temperature gas handling.

The mRO-50 Ruggedized is a breakthrough microwave optical double resonance (MODR) low SWaP-C Miniaturized Rubidium Oscillator designed to meet the latest commercial, military and aerospace requirements where time stability and power consumption are critical. It provides a one day holdover below 1µs and a retrace below 1E-10 in a form factor (50.8 x 50.8 x 20mm) that takes up only 51 cc of volume (about one-third of the volume compared to standard rubidiums) and consumes only 0.36W of power, which is about ten times less than existing solutions with similar capabilities. The mRO-50 Ruggedized Oscillator provides accurate frequency and precise time synchronization to mobile applications, such as military radio-pack systems in GNSS-degraded or denied environments. Its wide-ranging operating temperature of -40° to +80°C is also ideal for: Underwater Applications, Military Communications, Radars, Low Earth Orbit, Electronic Warfare, Airbornes & Avionics, UAV/UGV/USV/UUV

The First & Only Autonomous AI Pilot Deployed Since 2018

Similar to a human pilot, Hivemind reads and reacts to the battlefield, and does not require GPS, waypoints, or comms to make decisions. Hivemind enables intelligent teams to perform missions ranging from room clearance with Novas, penetrating air defense systems with V-BATs, to dogfighting F-16s.

Intelligent Teaming

Shield AI’s synthetic environments combined with human-machine tactics and behaviors. Testing and learning in real physics simulations reduces engineering cycle times and enables rapid real-world deployment. Welcome to the defense metaverse.

Edge Autonomy

The aircraft uses sensors to create a map or world-view, the computer then tells the aircraft or autopilot where to go and what to do to execute its mission. No GPS, no waypoints, and no comms are needed for aircraft to accomplish their missions.

Poongsan has been producing a variety of copper and copper alloy plates, ranging from copper products for everyday life to high-tech industrial materials. These copper and copper alloy plates, which are recognized as high-quality materials at home and abroad, are representative industrial basic materials that are widely used in all industrial fields, including automobiles, electrical and electronics, semiconductors, communications, construction, and machinery. Poongsan has various casting facilities, including the world's largest shaft furnace, a hot mill capable of continuously rolling 6-ton slabs, a tandem mill, and a 20-stage cold rolling mill, as well as various hot and cold rolling facilities and heat treatment furnaces. We are building a large-scale integrated production system from the casting process to finishing processes such as cutting and packaging. Poongsan's rolled products are produced in various sizes depending on the type, ranging from 630mm in width, 0.03mm in thickness, and thickness tolerance to 2/1000mm. These products have accurate specifications and physical properties and a smooth surface thanks to the establishment of a thorough quality control system using cutting-edge inspection equipment. Excellent. Poongsan's copper and copper alloy rolled products are produced in a variety of ways, including pure copper, brass, phosphor bronze, nickel silver, cupronickel, and special alloy (PMC26 and other) depending on the alloy composition and casting method. In particular, in response to market demands for new high-strength copper alloys due to technological advancements such as the Internet of Things and electric vehicles, we have developed new alloys (P1000HS and others) and are applying them to high-tech products requested by customers.

For aircraft operating in sophisticated, diverse, and dense threat environments, self-protection is crucial. With Saab’s fully Integrated Defence Aids Suite (IDAS) – a proven end-to-end, multi-spectral EW self-protection suite for rotary and fixed-wing platforms – you can take advantage of immediate and automatic countermeasure dispensing as well as instant warning and threat awareness to the crew. This is essential since survival depends on doctrine-tactics in combination with countermeasures. In short, with IDAS watching your back, you are well prepared for the most challenging missions, in the most demanding threat environments.