SBC (single board computer) for VMEbus based on TI DaVinci CPU, ARM Cortex-A8 1.2GHz, C674x 1GHz DSP, SGX530 3D Graphics Engine, DDR3 memory, Giga Ethernet 2 port, video input/output 5 port, SATA-2 2.5" SDD This is a built-in SBC board for video processing. Application field: image processing system Shipboard EO video system Video encoder/decoder system Multi-channel video storage/distribution system Characteristic: VME type multi-channel video recorder Supports 4-channel NTSC/PAL video compression (H.264) Supports 4-channel audio recording Supports local video and audio playback Supports network RTSP function Supports Ethernet-based GUI control

Integrated logistics support division, a Vendor Item Tool Manager, Consumables & Special Cutting Tools, Fixed and Rotary Wing String Lighting.

Specialty Tool Kits and Custom Sheet Metal Kits

High-performance video tracking camera UVA, a high-performance long-distance tracking camera optimized for aircraft such as helicopters. 2-axis, 3-axis, 4-axis and various sensors can be installed. Depending on your needs, you can choose from various options such as LRF, SWIR, and Pointer.

The SWIR & NIR 25-250mm f/5.5 (NFOV) f/4.0 (WFOV) continuous zoom lens is a first to market low-Size, Weight, and Power (SWaP), compact lens, for the newly introduced 5μm SXGA, as well as for 10μm SXGA, and 15μm VGA SWIR detectors. The SWIR & NIR zoom lens employs a unique mechanical and optical design, resulting in an all-around smaller and lighter unit with only 860gr in weight, and 224mm in length, making it approximately 60% lighter than similar existing SWIR lenses. The SWIR lens is also chromatically corrected to support a broader short-wave IR wavelength regime from 0.7-1.7μm and operates with minimal distortion. The SWIR & NIR 25-250mm f/5.5 (NFOV) f/4.0 (WFOV) continuous zoom lens presents an unrivaled combination of SWaP capabilities, detection range exceeding 26km. Product features: • Continuous zoom in the 0.7-1.7μm SWIR regime • Designed for 5μm, 10μm SXGA & 15μm VGA SWIR detectors • Lightweight (<860 gr) • Detection range >26 km • Enables laser-line detection

The RFcore Radar series are FMCW type radar and were developed to detect/track small air targets. The major difference between three models is detection performance. RX32B is fundamental model. RX128B have four times larger radar than RX32B. RX192A have six times larger radar then RX32B. The number of the product name means the number of antenna elements. All have compact and lightweight physical architecture that concentrates all the components required for radar, such as antenna, RF components and radar signal processor, in a small single housing. Transport can be carried in the carrier box and can be easily carried by one person. For installation, you can use a commercially available camera tripod. The weight is about 7.5kg (RX32B) and 15.9kg (RX128B), and the lower connection part is compatible with the tripod connection for the camera. Power supply requires 12VDC (RX32B) and 24VDC power (RX128B and RX192A). When using a battery, it is possible to connect a 12V battery or 24V battery to radars. Usage time may vary depending on the battery capacity. RFCORE recommended the constant power supply. Transfer of Status and BIT information and simple control of the RX32B, RX128B and RX192A are possible with a web browser using the Ethernet connection for authorized users. Using the terminal program provided with the radar, you can view the radar control and detected target information in real time. All RX Radar series’ Power Amp and Core Chip were designed using RFcore's own products.

The FICON was developed specifically for the K-11 Next Generation Rifle for the Korean Army. This system includes a laser range finder, uncooled infrared imaging and fuse timer for the 20mm air burst grenade round. Using the laser range finder, each unit is able to calculate the trajectory to which the grenade round must be fired in order to effectively hit the target. The computer automatically calculates a fuse time for the airburst grenade round. The hardware and software in the fire control unit do the work for the soldier. The soldier just has to point the gun where the sight tells him to and pull the trigger. Each unit is mounted directly onto the K-11 Rifle, and provides all the hard and software. There are both day and night optics in this sight, and each rifle has a human detection range of up to 500m.

Fly through GE's CF34-10 engine to learn why it is ready to power the B-52 into the future.