The operation of robotic inspection systems in an industrial environment requires a reliable control station. The second generation integrated control station -ICS 2- gives operators an all-in-one tool. Supplied in a rugged hardshell case (Pelicase®), embedded components such as a 21.5-inch touchscreen, high-performance PC or joystick can be selected according to industry standards. It also boasts a 10-year spare parts guarantee as well as extreme robustness and reliability even in harsh environments. Simplicity and ease of operation were key when developing ICS 2. The operator connects the robotic platform with one single cable and using the integrated joystick, operation is simple and self-explanatory.

Temperature / Flame Resistant Seals Reinforced & Non-Reinforced Seals Vulcanized Bonding Custom Technical Elastomeric Solutions

L3Harris search page.

With a peak torque of >200Nm / 1770 lbf-in and a rated torque of 80Nm / 708 lbf-in, the fully redundant DA 58-D is the strongest, electromechanical, fully integrated (actuator control electronics, position sensing, motor and drivetrain in one housing) actuator in the market. Besides the well-proven redundant RS 485 interface, the DA 58-D also features a redundant CAN bus interface. The DA 58-D has been developed for applications with the highest reliability demands. The redundant – two channel – design of the actuator allows continuous operation even if one of the two channels has failed. All major components such as the electric motors, control and communication electronics, and power supply are available twice (redundant). The actuator features a triple-redundant position sensor (2 out of 3 voting). Additionally there are several sensors integrated to provide diagnostic information such as current consumption, supply voltage levels and temperature readings. All major components of the actuator are continuously diagnosed by the microcontrollers of the actuator and its health status can be read via the redundant RS485 / CAN interface.

The radar that Raytheon Missiles & Defense is building for the U.S. Army has long been known as the Lower Tier Air and Missile Defense Sensor (LTAMDS). Now, ...

Auto Assembly Jig For : Wing Bottom Panel A320 Project 50m (L) x 1.1m (W) x 3.6m (H )

This is a contact-type and non-contact optical cable assembly for high-speed transmission of large-capacity signals such as video signals. It is a cable assembly for optical signal transmission in compliance with MIL standards by utilizing a contact/non-contact connector developed by Yeonhab Precision.

Contribute the Enhancement of Armed Forces with Continuous Technology Development Designed for replacing the Republic of Korea Army(RoKA)’s aged attack helicopter (500MD, AH-1S), the LAH(Light Armed Helicopter) Project is the one that aims to develop a cutting-edge armed helicopter suitable for the modern battlefield. Through the synergy of maximizing commonality in subsystems and parts with LCH(Light Civil Helicopter), KAI will reduce the development, production, and sustainment cost ultimately to be a bridgehead for a global helicopter market. The first flight of LAH was successfully conducted in 2019. KAI aims to complete the development of LAH in 2023.