CoaXPress enables bidirectional transmission of data transfer, camera control, power supply (PoCXP), and triggering over a single coaxial cable. This product supports the following transmission standards. Designation Bit Rate ========== ======== CXP-1 1.250 Gbps CXP-2 2.500 Gbps CXP-3 3.125 Gbps CXP-5 5.000 Gbps CXP-6 6.250 Gbps CXP-12 12.500 Gbps The CXR-4C amplifies and transmits image signals from 1/2/4-channel CoaXPress cameras to a PC frame grabber. Typically, transmission matches the distance between the camera and the device. Transmission distance depends on the coaxial cable type, and due to significant variability, specific distances are not provided.  4 CH x 1 Camera Configuration  2 CH x 2 Camera Configuration  1 CH x 4 Camera Configuration  2 CH + 1CH Camera Configuration

SBC (single board computer) for VMEbus based on TI DaVinci CPU, ARM Cortex-A8 1.2GHz, C674x 1GHz DSP, SGX530 3D Graphics Engine, DDR3 memory, Giga Ethernet 2 port, video input/output 5 port, SATA-2 2.5" SDD This is a built-in SBC board for video processing. Application field: image processing system Shipboard EO video system Video encoder/decoder system Multi-channel video storage/distribution system Characteristic: VME type multi-channel video recorder Supports 4-channel NTSC/PAL video compression (H.264) Supports 4-channel audio recording Supports local video and audio playback Supports network RTSP function Supports Ethernet-based GUI control

The FOR-10T/R supports Base configurations (including 10 Taps) and enables long-distance transmission of image signals via optical fiber, along with RS232 control signals and CC1~4 trigger signals. These signals are transmitted to the PC. This product supports transmission distances of up to 2 km, and by replacing the optical module, even longer distances can be achieved.  Fully supports the Camera Link interface (Area/Line Scan).  Supports Base (including 10 Taps) configurations (CC1~4, RS232, 10 Ports (Taps), LVAL, DVAL, FVAL).  Supports pixel frequency from 20 to 85 MHz.  Maximum transmission distance: 2000 m.  Enables lossless transmission.  Supports all external full-duplex RS232 communication speeds on a single port.  Features a locking DC power jack (Molex).  Camera link Connector Type : SDR connector.

K806 - With the increasing number of borderless missions throughout the globe and infantry units who need to complete their missions as quickly as possible, the 6x6 Wheeled Armored Vehicle is aimed at performing in the rear for the purpose of defending military facilities, transporting forces, conducting logistics convoy and reconnaissance missions. K808 - 8x8 Wheeled Armored Vehicle(K808) is designed to support rapid deployment and reconnaissance operations of infantry in battlefields and mountains. Capable of both running on ground and water, K808 is also capable of arming up with different weapon systems such as Remote-Controlled Weapon System(RCWS) and medium caliber turret.

Small wind power systems and component components Durability technologies: Composites - nacelle, blades, corrosion protection Stability technology: and wind speed control (electrical) + tail folding (mechanical) High-efficiency system: Direct-drive PMSG - slotless, blades, coefficient of power (Cp): 0.429 MPPT (Maximum Power Point Tracker) : Maximum power following control Web monitoring: Real-time monitoring Easy to maintain and install Quality Assurance: More than 3 years System certification: New and renewable energy facility certification, new product (NEP), excellent product designation by the Public Procurement Service - Korea's first Element parts certification: generator, inverter-CE, blade static load test, demonstration test completed Annual average wind speed of 4.5m/s or more

Taesang manufactures Fixed Wing Aircraft using advanced closed die forging technology with SMS Group equipment. This process ensures precision, consistency, and superior quality for critical aerospace applications

The operation of robotic inspection systems in an industrial environment requires a reliable control station. The second generation integrated control station -ICS 2- gives operators an all-in-one tool. Supplied in a rugged hardshell case (Pelicase®), embedded components such as a 21.5-inch touchscreen, high-performance PC or joystick can be selected according to industry standards. It also boasts a 10-year spare parts guarantee as well as extreme robustness and reliability even in harsh environments. Simplicity and ease of operation were key when developing ICS 2. The operator connects the robotic platform with one single cable and using the integrated joystick, operation is simple and self-explanatory.

Specialty Tool Kits and Custom Sheet Metal Kits