Altimeter for Missile Application

· Wide-area situational awareness through omni-directional cameras and EO/IR sensors · Seamless remote control enabled by LEO satellite communication and USV teaming operation · Multi mission capabilities by interchangeable mission modules such as UUV, UAV and compact rocket modules

The AMT-206-1 composite tail rotor blade is a direct replacement for Bell 206A and 206B series helicopter tail rotor blades. Now fitted with a new style of feathering bearings manufactured by KAMATICS. These bearings provide a longer life expectancy, with a patented lining that provides lighter pedal loads and a higher level of chemical resistance, compared to that of the standard fabric Teflon-lined bearings. The AMT-206-1 tail rotor blade has a non-symmetrical airfoil section and incorporates a swept tip. The T/R Blade is primarily fabricated from uni-directional Graphite (carbon fiber) and Aramid (Kevlar™) continuous fibers suspended in an epoxy matrix and is fitted with a nickel abrasion strip on the leading edge. The abrasion strip is bonded on using a urethane adhesive. The AMT-206-1 composite tail rotor blades have a 30% cost advantage, twice the lifespan, higher strength and thrust, and a substantial noise reduction, making them safer and ideal for helicopter operators flying in noise-sensitive areas like national parks and built-up areas.

CarboNIX NEO is an off-the-shelf separation system available in 8", 15", and 24“, 31.6” and 38.81” sizes. It is scalable to any custom diameter for satellites upwards of 1000 kg. While NEO uses the same lock mechanism and pusher arm subsystems as CarboNIX, NEO employs a new clamp ring system which is stronger, stiffer, can withstand higher loads and launch heavier spacecraft than any other separation system on the market.

The compact MD89MW-DroneCAN is a 13mm, metal gear, sub 1 oz micro servo with dual ball bearings, coreless metal brushed motor, and contactless magnetic encoder. This discrete package offers high performance and reliability for robotic and remote, unmanned aerial applications where space and weight are at a premium. Operating via DroneCAN (formerly UAVCAN) control at a wide voltage range from 4.8~7.4 volts, the unique MD89MW actuator produces impressive performance, with torque and speed numbers equal to servos weighing twice as much from just a few years ago. #UAV #UAS #UGV

AI Navigation Algorithm The Certus Mini range features Advanced Navigation’s revolutionary AI neural network sensor fusion algorithm. The algorithm was designed for control applications and has a high level of health monitoring and instability prevention to ensure stable and reliable data. High-Performance MEMS The Certus Mini range contains high performance MEMS sensors that are put through Advanced Navigation’s intensive 8 hour temperature calibration process. This provides the highest accuracy possible from this sensor class and outputs consistent accuracy over the full temperature range from -40°C to 85°C. Reliability The Certus Mini range has been designed from the ground up for mission-critical control applications where reliability is essential. Built using a safety-oriented real-time operating system, all software is designed and tested to high safety standards with fault-tolerance in mind. The Certus Mini range is designed, manufactured and tested to military standards. L1/L5 Multi Constellation RTK GNSS The Certus Mini N supports L1/L5 dual frequencies, and GPS, GLONASS, Galileo, BeiDou and NavIC constellations. Access to multiple constellations and frequencies provides enhanced accuracy, availability and performance even in difficult environments such as multi-storey urban canyons. The GNSS receiver has 10 mm position accuracy with real-time RTK or post-processed PPK. Extensive Interoperability Certus Mini seamlessly communicates with a wide range of industry standard protocols including NMEA 0183 and CANOpen making it easy to integrate into existing systems. Certus Mini effortlessly interfaces with ROS 1, ROS 2, and Ardupilot, streamlining your development processes for maximum efficiency and effectiveness.

The reference timing is used as the standard time for many tasks linked in various fields of industry and society. Especially precisely synchronized timing information and signals are widely used to keep mobile networks synchronization and generate precise time and frequency. In addition, it is being utilized in various ways such as power protection system for power generation and load management of each power plant according to smart grid issue, military satellite communication, electronic warfare signal detection and command control communication system. Features NTP Related Content Timing Accuracy (1PPS): ± 100ns or less Providing Various Frequency Outputs According to User's Requirements GPS L1 Signal Synchronization Event Logging and Network Remote Management Available for operators ODM / OEM Supply Available Proven Stability Through Various Performances of Mobile Communication Network and Power Protection System Providing IRIG-B (TTL, SINE) Signal Input / Output Interface (selectable according to User's Requirement) Providing GPS NMEA in Message API form (N220) Providing PCIe Interface

The new TAC-450-320/340/360 inertial measurement unit (IMU) is a dependable, tactical-grade, non-ITAR inertial system that’s also affordable. It features EMCORE’s exclusive photonic integrated chip (PIC) technology for robust performance and survivability and offers inertial-grade MEMS accelerometers for outstanding FOG-based inertial performance as affordable as MEMS alternatives. The TAC-450-320/340/360 IMU is ideal for autonomous and unmanned commercial and defense applications, mobile mapping and surveying systems, targeting and pointing systems, and guidance and positioning. Highlights Compact and lightweight with high-performance Offered with 16g inertial-grade MEMS accelerometer Robust performance with high bandwidth Technology Details Photonic Integrated Chip Technology EMCORE’s photonic integrated chip (PIC) technology reimagines FOG technology by replacing individual fiber components with an innovative integrated planar optic chip. This results in a FOG with PIC Inside™ that’s reliable and robust. With three of these integrated photonic gyros at its core, the TAC-450-320/340/360 IMU provides the safe, accurate performance autonomous platforms demand. State-of-the-art Electronics EMCORE’s Dual Core DSP electronics with ARM processor require less power for extended product life and offer higher speed with integrated multi-channel processing. Low-loss optical circuits use less light for greater efficiency. Feature Options Developer’s Kit for Rapid Integration The FOG/IMU Developer’s Kit includes easy-to-use software that accelerates your IMU and FOG integration, development, and interface efforts.