The ENM2000 is a vehicle-mounted mmWave base station integrating CU/DU/RU, working in conjunction with the EPNR4000, 5G Core, and application server. It enables ultra-broadband data communication that Sub-6GHz base stations cannot provide.

Main Features of CLS-30T5 Camera Link Compatibility: Supports all Camera Link types (Area Scan / Line Scan). Video Distribution: 1:5 distribution capability supporting Base, Medium, and Full configurations. Power over Camera Link (PoCL): Performs PoCL Bypass functionality. Pixel Frequency: Supports a pixel frequency range of 20 MHz to 85 MHz. Transmission Quality: Ensures lossless video signal transmission. Power Connector: Equipped with a lockable DC power jack (Molex connector). Interface: Supports MDR-26 type connectors. Control Signal Support: Supports all standard RS-232 communication speeds.

JEFF WRAITH I is the tactical goggle for Military & Law Enforcement. The lightweight goggles give you wide protective coverage with a comfortable fit for use. It is compliant with ANSI Z87.1 standard requirement, European CE standard, and exceed U.S. Military eyewear ballistic resistance requirement MIL-PRF 32432A, MIL-DTL-43511D. The Anti-Scratch & Anti-Fog coated polycarbonate lenses give you up to 99.9 protections form UV rays and you can wear the goggle with your glasses on.

It is mounted on a weapon system such as a fuze that rotates at high speed, and is a high-sensitivity and high-performance GNSS receiver capable of providing up to 10Hz output and multi-band GNSS signal reception as well as narrowband jamming rejection capability. You can get more than 20dB anti-jamming capability comparing with traditional high-sensitivity receivers. Features: Mounted Anti-Jamming Algorithm High Sensitivity & Multi-Band GNSS(GPS/GLONASS/Galileo) Receiver Optimum Reception Even in Harsh Battlefield Conditions Currently Applying Weapon Systems such as Small Fuze

AI Navigation Algorithm The Certus Mini range features Advanced Navigation’s revolutionary AI neural network sensor fusion algorithm. The algorithm was designed for control applications and has a high level of health monitoring and instability prevention to ensure stable and reliable data. High-Performance MEMS The Certus Mini range contains high performance MEMS sensors that are put through Advanced Navigation’s intensive 8 hour temperature calibration process. This provides the highest accuracy possible from this sensor class and outputs consistent accuracy over the full temperature range from -40°C to 85°C. Reliability The Certus Mini range has been designed from the ground up for mission-critical control applications where reliability is essential. Built using a safety-oriented real-time operating system, all software is designed and tested to high safety standards with fault-tolerance in mind. The Certus Mini range is designed, manufactured and tested to military standards. L1/L5 Multi Constellation RTK GNSS The Certus Mini N supports L1/L5 dual frequencies, and GPS, GLONASS, Galileo, BeiDou and NavIC constellations. Access to multiple constellations and frequencies provides enhanced accuracy, availability and performance even in difficult environments such as multi-storey urban canyons. The GNSS receiver has 10 mm position accuracy with real-time RTK or post-processed PPK. Extensive Interoperability Certus Mini seamlessly communicates with a wide range of industry standard protocols including NMEA 0183 and CANOpen making it easy to integrate into existing systems. Certus Mini effortlessly interfaces with ROS 1, ROS 2, and Ardupilot, streamlining your development processes for maximum efficiency and effectiveness.

It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

WPGM0206012M is a 12W Gallium Nitride (GaN) Monolithic Microwave Integrated Circuit (MMIC). WPGM0206012M is useful for various application as it is covering from 0.5GHz to 8.5GHz. Spec : Frequency : 0.5-8.5GHz Saturated Output Power : 19.5W@4GHz PAE : 22.49% Power Gain : 5.91dB@4GHz Operating Voltage : 48-50V Please contact WAVEPIA for more information.

Our electronics business sector has been producing copper cladded laminates of printed circuit boards for over 20 years. To meet high heat dissipation for the newest electronic technology, we have developed metal based laminates and carbon laminates.