Type : Radial (3P) Size(L,W,H mm) : 193 × 100 × 100 Weight(kg) : 1.7 [Active] N. Speed(rpm) : 3,700 N. Torque(Nm) : 5 N. Power(kW) : 2

To guarantee maximum safety and reliability, our DA 30 features a brushless motor and a contactless wear-free position sensor. This means maximum service life with the greatest‐possible power delivery and its design prevents electromagnetic emissions (EMI) caused by brush sparking. The housing made of saltwater‐resistant aluminum is HART‐coat treated, meets the IP‐67 standard for water and dust sealing and provides an integrated Sub‐D connector (MIL spec. circular connector or cable gland on request). Brackets integrated in the housing for horizontal and vertical assembly. 8‐fold, ball‐bearing supported, steel gear train, drive shaft with ANSI multi‐tooth. The DA 30 series can be equipped with a standard PWM input (Pulse Width Modulation) that has two different interfaces: a differential, galvanic isolated interface (Opto‐Coupler) and a single‐ended interface with CMOS levels that is also used to program the servo parameters. It includes analog position feedback to detect the drive shaft position. A differential RS‐422 PWM interface can be chosen instead of the opto‐coupled interface. The DA 30 with digital serial command interface (RS‐485) receives its commands via a CRC secured protocol. It can return not only the shaft position in digital format, but also several diagnostic data such as the level of the supply voltage, current consumption and the temperature of the motor and electronics in digital form (optionally also the humidity within the actuator case). These kind of diagnostic capabilities help to determine the health state of the actuators before, during and after deployment.

Investigate the smallest of features with spatial resolution down to 600 nm – A state-of-the-art nano-focus x-ray source, precision stages, and high-quality detectors work together to deliver sub-micron resolution imaging. Perform true 4D imaging with Dynamic CT – High temporal resolution, continuous and uninterrupted scanning, and specialized 4D software tools bring synchrotron-like capabilities to the lab. Implement 3D in situ experiments – continuous sample rotation and scanning enable uninterrupted in situ experiments. Dedicated “no-cable-wrap” interfaces simplify experiment set-up. Accommodate a broad range of samples – UniTOM HR’s high power source (50W), multiple detector options (up to 3) and heavy load stage (45 kg) accommodates samples up to 500 mm diameter X 700 mm high. Maximize system utilization and throughput – A fast frame rate detector and a high flux x-ray source combine for high temporal resolution tomography giving you the ability to scan more samples and accommodate more users.

Optimized Friction Materials: Ensures consistent braking performance under diverse operational conditions. Extended Service Life: Designed to reduce wear and improve cost-efficiency for operators. Enhanced Safety & Reliability: Engineered to comply with global aviation standards for maximum operational safety. Sustainable Technology: Developed with advanced manufacturing processes that minimize environmental impact.

TERRAPIN X is a rugged handheld laser rangefinder by Safran Vectronix, offering up to 3,000 m range with 8× magnification, Class 1 eye-safe laser (905 nm), and a 28 mm objective lens. It features precise beam divergence (1.2 × 0.5 mrad), slope and azimuth compensation, scan mode (≥2 readings/sec), and durable Ryton® housing with shock-resistant rubber armor (IP67). Advanced Bluetooth connectivity integrates with mobile apps and devices such as Kestrel LiNK, Garmin, Strelok Pro, and includes a dedicated smartphone app.

The AMT-206-1 composite tail rotor blade is a direct replacement for Bell 206A and 206B series helicopter tail rotor blades. Now fitted with a new style of feathering bearings manufactured by KAMATICS. These bearings provide a longer life expectancy, with a patented lining that provides lighter pedal loads and a higher level of chemical resistance, compared to that of the standard fabric Teflon-lined bearings. The AMT-206-1 tail rotor blade has a non-symmetrical airfoil section and incorporates a swept tip. The T/R Blade is primarily fabricated from uni-directional Graphite (carbon fiber) and Aramid (Kevlar™) continuous fibers suspended in an epoxy matrix and is fitted with a nickel abrasion strip on the leading edge. The abrasion strip is bonded on using a urethane adhesive. The AMT-206-1 composite tail rotor blades have a 30% cost advantage, twice the lifespan, higher strength and thrust, and a substantial noise reduction, making them safer and ideal for helicopter operators flying in noise-sensitive areas like national parks and built-up areas.

◎ Operation of Dedicated Defense Project Space To safeguard clients' data and technology, translators work exclusively in the secure Defense Translation Room with dedicated security PCs. ① Operation of an isolated, secure defense translation facility. ② Formation of a specialized Defense Business Team and assignment of dedicated security personnel. ③ Management of Defense Translation Project Rooms, designated as DT Room 1 to 3. ④ All personnel involved in defense translation projects have undergone background checks by the Defense Counterintelligence Command. ⑤ Integration and operation of a secure defense translation space, including a server room, centralized document server, restricted areas, and security software. ◎ PROLANGS Security System 1. Facility & Information-Communication Security • Operation of a dedicated server room • Physical separation between civilian and defense translation areas • Operation of dedicated defense translation room (restricted area) • All defense PCs secured using dedicated locks • Data leak prevention through UTM, antivirus solutions, and DLP systems with CC certification • Strict control of storage media (USB, CD/DVD, etc.) • Real-time monitoring of the defense office via CCTV 2. File Management via Centralized Document Server • Files are restricted from being saved on local PCs and external file transfer is prohibited, to ensure all data is stored on the centralized server. • Access to web storage, browsers, cloud services, and other storage media is restricted. • File access is granted based on authority levels. • Version control is applied to manage all file modifications. • Comprehensive management of file history from creation, modification, and deletion to final delivery.