It is an UAV recovery system that lands a fixed-wing UAV even in mountainous terrain where there is no sufficient runway for landing. The UAV is damping through a net mounted on the vehicle and lands on an air-cushion mat. It has the advantage of being easy to deploy in places where vehicles can enter and exit. But the type of the aircraft capable of stable landing is limited.

Powered by NVIDIA® Jetson AGX Orin™ SoM bundled with JetPack 5.1.1 Powered by NVIDIA® Jetson AGX Orin™ Industrial bundled with JetPack 6.0 Rugged -25°C to 70°C fanless operation (JAO32/ JAO64) - No throttling at 55°C with JAO64 MAXN Mode Rugged -40°C to 75°C fanless operation (JAOi) - No throttling at 50°C with JAOi MAXN Mode IP66 waterproof and dustproof Support 8x GMSL2 automotive cameras via FAKRA Z connectors (NRU-230V-AWP) 4x PoE+ GbE and 1x 10GBASE-T via M12 X-coded connectors 2x isolated CAN 2.0, 1x RS232, and 1x isolated RS485 via M12 A-coded connectors 1x system monitoring port by automotive-grade MCU 8V to 48V wide-range DC input with built-in ignition power control Compatible GMSL2 cameras with pre-built drivers

Engine Start Begins with ATS. The Air Turbine Starter (ATS) is a key component of an aircraft's secondary power system, driven by Bleed Air supplied from the Auxiliary Power Unit (APU) to accelerate the engine up to approximately 8,900 RPM, enabling engine start. Through the in-house development and localization of the ATS, we have incorporated power generation, optimal design of the shear section with consideration of failure, Containment functionality, as well as lubrication and power transmission systems. In addition, we have secured manufacturing and assembly technologies and continue development aimed at successful operation and the establishment of a mass production system.

Side shells, wing shells and fuselage structures are made of CFK, GFK, aluminium or organic sheets and get connected during production. Sealants are used to seal the connection surfaces. These are usually two-component polysulphides, which have to be applied in different geometries. Typical applications are: Fillet sealings, oversealings, interface sealings and seal caps. Due to their properties, polysulfides require very low pressure and shear handling. The compressibility of the fillers contained in the medium requires a high level of expertise and a coherent overall system from material removal to application. With manual application, long production times and high material ejection have a negative influence on the complete process. Complex quality standards are required due to the risk of human error. With the in-house developments of the vipro-DUOMIX from ViscoTec, this process can be depicted fully automatically. The individual nozzle design is also adapted to each application. The result is a controlled dosage in compliance with the specifications and at the same time the highest repeat accuracy.

Design and fabric considering activity and comfort WR Coated water-repellent finish Excellent breathability achieved with spandex mesh lining in armpits and pockets Adjustable hood size with string and stopper Use of reliable materials including YKK zippers, etc. Composition Material : Nylon, Cotton, Polyurethane Size 95 ~ 115 Colors BK (Black) CYT (Coyote Brown)

The member companies of GIFAS employ 195,000 people in their aerospace activities in France. These figures do not include temporary workers or the total number of suppliers and subcontractors; this field is estimated to be responsible for 350,000 jobs in France. Our sector is constantly in demand.

This product supports the following transmission standards. Designation Bit Rate ========== ========== CXP-1 1.250 Gbps CXP-2 2.500 Gbps CXP-3 3.125 Gbps CXP-5 5.000 Gbps CXP-6 6.250 Gbps CXP-12 12.500 Gbps The CXR-2C amplifies and transmits image signals from 1/2-channel CoaXPress cameras to a PC frame grabber. Typically, transmission matches the distance between the camera and the device. Transmission distance depends on the coaxial cable type, and due to significant variability, specific distances are not provided.

The Fuel Heater is engine-mounted with fluid connections to both the engine fuel supply system and the engine lube oil system. The heater provides fuel heating for fuel de-icing, using engine lube oil flow during aircraft cold start and cold operation periods. REPAIR PROGRAM • Triumph has the expertise only the OEM can offer • OEM repairs are more dependable, increase MTBF and cost less long-term • Repair price is all inclusive • TAT 45 days approx