The AMT-206-1 composite tail rotor blade is a direct replacement for Bell 206A and 206B series helicopter tail rotor blades. Now fitted with a new style of feathering bearings manufactured by KAMATICS. These bearings provide a longer life expectancy, with a patented lining that provides lighter pedal loads and a higher level of chemical resistance, compared to that of the standard fabric Teflon-lined bearings. The AMT-206-1 tail rotor blade has a non-symmetrical airfoil section and incorporates a swept tip. The T/R Blade is primarily fabricated from uni-directional Graphite (carbon fiber) and Aramid (Kevlar™) continuous fibers suspended in an epoxy matrix and is fitted with a nickel abrasion strip on the leading edge. The abrasion strip is bonded on using a urethane adhesive. The AMT-206-1 composite tail rotor blades have a 30% cost advantage, twice the lifespan, higher strength and thrust, and a substantial noise reduction, making them safer and ideal for helicopter operators flying in noise-sensitive areas like national parks and built-up areas.

C-UAS 30kW SBC HEL Source

specialized heat shrink tubing for the defense industry, with international standards such as QPL SAE AS23053, DEF STAN 59-97, VG 95343, and BS G198.

Supported by a rugged internal combustion engine compatible with heavy fuels, Reliant delivers over 10 hours of persistent ISR without runways, launchers, or recovery gear. Designed for high-wind, high-altitude, and denied environments, Reliant excels where legacy platforms fall short. Dual swappable payload bays support ISR, SIGINT, or EW missions, while onboard edge AI processing enabled by NVIDIA Jetson Orin NX modules delivers real-time threat detection and adaptive rerouting, even without connectivity. The platform can be deployed by a two-person team in under 10 minutes using a compact 10×10-meter footprint for launch and recovery from rooftops, vehicles, ships, or remote terrain. With an IP55-rated, all-weather design and reliable GNSS-denied navigation, Reliant gives operators the flexibility and resilience required to operate in complex, contested battlespaces.

Rolatube IAM (Integrated Antenna Mast) is a lightweight, man-portable communications mast that integrates a high-efficiency dipole antenna directly into its structure—redefining rapid tactical deployment. Built from Rolatube’s proprietary bistable composite, the IAM unrolls to full height without tools, enabling users to connect and transmit in seconds. Available in 3.5 m and 7 m models, the mast weighs just 1.9 kg and packs down to a 150 mm roll, offering unmatched portability for dismounted operations. Designed for reliable RF performance, the IAM ensures no signal loss when in contact with grounded surfaces. Its embedded omni-directional dipole antenna delivers superior range and VOR communication performance compared to traditional systems. The 3.5 m IAM comes in VHF (30–300 MHz) and UHF (136–470 MHz) variants, each available in four colours, with a top-cap socket for L-Band antenna integration, extending the system’s use to applications such as telemetry, GPS, and aircraft surveillance. The mast can be handheld, guyed, or elevated via an integrated rigging point, and is engineered to meet MIL-STD-810G, fully maintenance-free, and resistant to water, dust, and UV. With a wind rating of 100 km/h (62 mph) when guyed, the IAM stands up to demanding field environments while delivering high-performance, elevated communications infrastructure at the tactical edge.

SURI-A is a compact design thermal sight based on high performance infrared detector meeting military grade requirement. It uses a lightweight un-cooled thermal imager and advanced optic providing soldiers a one-stop solution for reconnaissance, patrol and engagement, regardless of light and battle field conditions. It is a versatile, multipurpose sight that is compatible on a broad range of Fire Arms.

ㅇKey Features RF Front-End - Frequency : C-Band - Tx Power : +27 dBm(0.5 W) , Rx Range : -10 ∼ -100 dBm - Rx Sensitivity : -95 dBm@2 MHz Baseband & Modem - Downlink : 2.4 Mbps / Uplink: 8 kbps - QPSK waveform and CTC Forward Error Correction Anti-Jamming / Anti-Spoofing / Video CODEC - Anti-Jamming Capability using DSSS - Anti-Spoofing Capability by AES-256/ ARIA-256 Encryption - Support H.264 / up to 1920x1080x30f Interface - 10/100 Base-T Ethernet x1, RS-422 x1, RS-232 x2 - 3G-SDI Digital Video IN/OUT Interface - Limited Discrete I/O (1PPS/sync_in, reset_in, status_out) ㅇQuality and Certification - MIL-STD-810G - MIL-STD-461F

SJP’s special parts are custom-designed and manufactured to meet unique requirements that standard components cannot fulfill. With our advanced R&D capabilities and state-of-the-art CNC multi-tasking machines, we handle complex geometries, tight tolerances, and special materials with precision. These parts are widely used in medical devices, semiconductor equipment, precision instruments, and aerospace & defense, where reliability and high accuracy are essential. From rapid prototyping to full-scale production, we deliver end-to-end solutions that shorten development cycles and enhance product competitiveness.