Ray Service, a.s., is a system integrator of many world manufacturers of cable components. The company has been successful and proved reliable in the highly demanding military, aerospace and industrial technology markets.

The maximum transmission distance varies based on the following frequency-related specifications. Camera Frequency Max Cable Length ================ =============== 20 ~ 60 MHz 10 m 60 ~ 80 MHz 7 m 80 ~ 85 MHz 5 m The PoCL Bypass function supports Power over Camera Link (PoCL) operation from the Frame Grabber to the selected camera. However, the power supply to unselected cameras is automatically disabled. To prevent power cutoff, separate power must be provided to the cameras. Configurations are available as follows, including image signal amplification. [Features of CLM-30C4]  Fully supports the Camera Link interface (Area/Line Scan).  Provides manual (switch) or remote (RS232) camera selection.  Allows selection from one of four cameras configured for Base (Layer 1) or Medium/Full (Layer 2) levels.  Supports Base/Medium/Full setups (CC1~4, RS232, LVAL, DVAL, FVAL)  PoCL bypass function: Automatically powers only the selected camera when PoCL-compatible cameras, frame grabbers, and cables are used.  Supports pixel frequency from 20 to 85 MHz.  Supports PoCL signal bypass (patented).  Enables lossless transmission.  Provides additional full-duplex RS232 communication at up to 256 Kbps.  Features a locking DC power jack (Molex).

Main advantages of the PBS ECS systems include the possibility of cooling, heating and ventilation in one system, minimal power consumption, ecological operation without the need for a coolant and a compact design. Specific applications of the ECS systems include light combat aircraft AERO L-159 ALCA, jet trainers AERO L-39NG and L-39 Albatros, etc.

To guarantee maximum safety and reliability, our DA 30 features a brushless motor and a contactless wear-free position sensor. This means maximum service life with the greatest‐possible power delivery and its design prevents electromagnetic emissions (EMI) caused by brush sparking. The housing made of saltwater‐resistant aluminum is HART‐coat treated, meets the IP‐67 standard for water and dust sealing and provides an integrated Sub‐D connector (MIL spec. circular connector or cable gland on request). Brackets integrated in the housing for horizontal and vertical assembly. 8‐fold, ball‐bearing supported, steel gear train, drive shaft with ANSI multi‐tooth. The DA 30 series can be equipped with a standard PWM input (Pulse Width Modulation) that has two different interfaces: a differential, galvanic isolated interface (Opto‐Coupler) and a single‐ended interface with CMOS levels that is also used to program the servo parameters. It includes analog position feedback to detect the drive shaft position. A differential RS‐422 PWM interface can be chosen instead of the opto‐coupled interface. The DA 30 with digital serial command interface (RS‐485) receives its commands via a CRC secured protocol. It can return not only the shaft position in digital format, but also several diagnostic data such as the level of the supply voltage, current consumption and the temperature of the motor and electronics in digital form (optionally also the humidity within the actuator case). These kind of diagnostic capabilities help to determine the health state of the actuators before, during and after deployment.

Type : Radial (3P) Size(Ø, mm) : 152 × 106 Weight(kg) : 5.1 N. Speed(rpm) : 2000 N. Torque(Nm) : 55 N. Power(kW) : 11.5

Plane Windows are used as substrates for a variety of applications, such as laser window, output couplers, beamsplitters, beam combiners, mirrors, dichroic filters and plate polarizers. Considerations in selecting window substrates include transmission range, absorption coefficient, incident laser power density and environmental factors such as pressure, temperature, moisture, abrasion and corrosion. Plane Windows listed under UV / VIS / NIR substrates are specified for applications involving coating wavelengths 193nm ≤ λ〈2.0 μm. Units for these substrates are given in mm. Plane Windows listed under IR substrates are specified for applications involving coating wavelengths λ≥ 2.0 μm. Units for these substrates are given in inches. Refer to the THIN FILM COATINGS section for information on coatings that can be applied to these substrates.

An electric motor that supplies power to the actuator for opening and closing the KF-21 canopy.

Presentation by Haigh Farr during the Virtual NH Career Fair, hosted by JobsInNH.