WPGM0206012M is a 12W Gallium Nitride (GaN) Monolithic Microwave Integrated Circuit (MMIC). WPGM0206012M is useful for various application as it is covering from 0.5GHz to 8.5GHz. Spec : Frequency : 0.5-8.5GHz Saturated Output Power : 19.5W@4GHz PAE : 22.49% Power Gain : 5.91dB@4GHz Operating Voltage : 48-50V Please contact WAVEPIA for more information.

The SCXMC-AURORA is one of Seedcore’s flagship products, designed for high-speed optical data communication through an XMC interface. Utilizing the Xilinx Aurora 64B/66B protocol, it supports four transmit/receive channels, each operating at 10.3125 Gbps via integrated optical transceivers. A device driver program is required for operation, and the Linux driver can be downloaded from the product information page on Seedcore’s website. This module is deployed in the M-SAM air defense system, providing reliable and high-speed data transfer between mission-critical embedded components.

CarboNIX NEO is an off-the-shelf separation system available in 8", 15", and 24“, 31.6” and 38.81” sizes. It is scalable to any custom diameter for satellites upwards of 1000 kg. While NEO uses the same lock mechanism and pusher arm subsystems as CarboNIX, NEO employs a new clamp ring system which is stronger, stiffer, can withstand higher loads and launch heavier spacecraft than any other separation system on the market.

The KX1-3046 is an X-band high-power MMIC amplifier fabricated on the GaN-on-SiC process. It operates from 8.0 – 10.5 GHz and typically provides 30W saturated output power with power-added efficiency of 46%. The KX1-3046 can support military and commercial radar systems. It is matched to 50Ω with integrated DC blocking capacitors on both RF input and output ports. The KX1-3046 is 100% DC and RF tested on-wafer. It is available in chip form. **Key Features** - Frequency Range: 8.0-10.5GHz - Small Signal Gain: 28dB - High Pout: 30W - High PAE: 46% - DC bias: Vd=28V @Idq=0.6A - Pulsed Vg: PW=100µs, DC=10% - Chip size: 2.95x3.1x0.1mm  

In order to guarantee the quality required by customers based on excellent quality and productivity, we practice close quality control through SQ and IATF16949 certifications and devote ourselves to put all of our capabilities so that we would earn customers’ recognition.

ENGINeUS™ Aircraft Electric Motors are self-contained direct drive propulsion power pods. This modular and scalable machine allows an easy integration into a vehicle whilst maintaining optimization of the propulsive function of new mobility platforms and hybrid turbomachinery.

High Power Polarizing Beamsplitter Cube coatings are deposited on the hypotenuse of right angle prisms that are optically contacted. They are designed to separate an incident beam into its S and P polarization components with an average extinction ratio (TP/TS) in excess of 500 : 1. The incident energy is split into two orthogonally polarized beams that emerge at 90。with respect to each other. These coatings were developed specifically for use in high power pulsed and CW laser applications.

STX Engine produces medium speed engine driven power generation equipment that can satisfy customers 100% by ideally combining medium speed engines, which have been collectively produced at our Changwon factory since obtaining licenses from the mid 1970's from MAN ENERGY SOLUTIONS in Germany and NIIGATA POWER SYSTEM in Japan, with a power generation system designed with rich experience in the area of system engineering. By installing diesel engine power generation equipment in locations across Korea and overseas, such as on islands, remote areas, resorts, etc., where no public power supply is available, as well as industrial complexes and hospitals which require good source of power, and factories receiving expensive public power supply, etc., our customers can confirm the investment effect within a short period of time after experiencing the power supply we make available to them, as well as low installation and operation costs and maximized availability of the equipment.