- Comprehensive High-Frequency Electromagnetic Simulation - Analysis of ships, submarines, aircraft, fighter jets, and satellites including antennas - EMC and EMP analysis including cables - Radome and multi-antenna interference analysis - Wireless coverage, network planning, and spectrum management

The Haigh-Farr Wraparound™ is a self-contained omnidirectional antenna for cylindrical or conical shaped bodies. A single point feed is used and no external splitters, combiners or cable harnesses are required for installation. The antenna is conformal, and may be mounted flush, or on the exterior of the vehicle. Designs are available from 300 MHz to 13 GHz with typical applications including Flight Termination, GPS, Telemetry, Data Links and Transponder. Multiple antenna elements may be combined within the same physical Wraparound™, providing multi- band capability in a single, compact package. Wraparound™ antennas have been flown on vehicles from subsurface sea to space, including high-mach kinetic kill weapons, high-G projectiles and re-entry vehicles. The Wraparound™ has been qualified for use on several high performance vehicles flown on test and launch ranges throughout the United States and Europe. For high aero-heating applications an ablative heat shield may be added to the antenna for additional thermal protection.

The KX2-2046 is an X-band high-power MMIC amplifier fabricated on the GaN-on-SiC process. It operates from 8.0 – 10.5 GHz and typically provides 20W saturated output power with power-added efficiency of 46%. The KX2-2046 can support military and commercial radar systems. It is matched to 50Ω with integrated DC blocking capacitors on both RF input and output ports. The KX2-2046 is 100% DC and RF tested on-wafer. It is available in chip form. **Key Features** - Frequency Range: 8.0-11.5GHz - Small Signal Gain: 26dB - High Pout: 20W - High PAE: 46% - DC bias: Vd=28V @Idq=0.3A - Pulsed Vg: PW=100µs, DC=10% - Chip size: 2.95x1.66x0.1mm  

We have been designing and supplying cryogenic turbines for helium liquefaction since the late 1980s. Today we are a major supplier of turboexpanders, compressors and pumps to the world's leading manufacturers of cryogenic systems. Our cryogenic product line utilizes the unique PBS technology and know-how of dynamic gas bearings. We supply to prestigious research institutes such as CERN, Max Planck Institute or Rosendorf Research Centre. With the new HEXT/CTE300 turboexpander we will be ready for the hydrogen ecosystem

This explosive detector, built on a photochemical sensor, is a security device that detects traces of explosives by sucking in the surrounding air. It is scheduled for trial application at APEC 2025.

Fast and Intuitive Quality Inspection With precise AR overlay technology, deviations between 3D design data and real-world objects can be identified instantly. This enables fast and accurate quality inspections on the spot. Optimized and Lightweight 3D File Processing Supports the four most popular 3D file formats: FBX, GLTF, OBJ, and STL. Lightweight processing ensures faster matching and smoother inspection workflows. From Inspection to Report — All in One Inspection results can be recorded and documented with image captures, drawings, and notes. Final reports can be exported in PDF, XLS, or CSV formats, making them easy to share and manage.

Hydraulics International, Inc. (HII), headquartered in Chatsworth, California, U.S.A., is a leading worldwide supplier of integrated products, services and support to military forces, aviation and commercial industries, Government agencies and prime contractors. Focused on defense and commercial technology, the Company develops, manufactures and supports a broad range of systems for over one hundred industries as well as mission-critical and military sustainment requirements over the globe. Our extensive design capabilities enable us to produce the most sophisticated technological units known in the Aircraft Ground Support Equipment (AGSE) profession.

HII has been recognized as one of the largest defense ground support equipment technology companies in the world. We hold leading market positions in ammunition loading systems, aircraft hydraulic system testing, aircraft cabin pressure testing, power systems, environmental control systems, military trailers, high-pressure gas and liquid systems, flow measuring equipment, and integrated logistics and support services.

Our corporate, engineering and manufacturing facilities, located in Chatsworth, CA and Forsyth, GA, encompass over 625,000 sq. feet of production space. Our manufacturing facility is equipped with state-of-the-art equipment such as CNC lathes and mills, computerized tube bending, full sheet laser and waterjet, automatic press brake and programmable punch press, laser topography scanners, and other quality verification devices.

Today, space satellites are moving away from RF Analog based payloads providing low speed telecommunication signaling, to a new Digital Transparent Processor architecture for high throughput satellites. Those architectures increase the demand for rugged and higher speed connectivity. To meet those industry needs, Smiths Interconnect has developed the NXS Series, an advanced high speed, high density interconnect to provide next generation data on demand. Equipped with the Hypertac® hyperboloid contact technology the NXS system can withstand data rate application up to 50 Gbps (per channel) requirements, including extreme levels of vibration, shock and climatic testing above 2100 g. The NXS Series is designed in a robust construction with 4 or 12 high speed quadrax (dual-twinax) modules. The recent EMI Flange addition provides the extra benefit of reducing electromagnetic interference. Each ultra-high density quadrax module contains 2 dual twinax at 100 Ω each pair. It is blind mateable, hot pluggable, with ultra-low mating forces and low outgassing materials. In addition, the solderless PCB mount design reduces the customer’s risk and cost of ownership. The connector is mounted after reflow and has no impact on nearby components.