The AMT-206-1 composite tail rotor blade is a direct replacement for Bell 206A and 206B series helicopter tail rotor blades. Now fitted with a new style of feathering bearings manufactured by KAMATICS. These bearings provide a longer life expectancy, with a patented lining that provides lighter pedal loads and a higher level of chemical resistance, compared to that of the standard fabric Teflon-lined bearings. The AMT-206-1 tail rotor blade has a non-symmetrical airfoil section and incorporates a swept tip. The T/R Blade is primarily fabricated from uni-directional Graphite (carbon fiber) and Aramid (Kevlar™) continuous fibers suspended in an epoxy matrix and is fitted with a nickel abrasion strip on the leading edge. The abrasion strip is bonded on using a urethane adhesive. The AMT-206-1 composite tail rotor blades have a 30% cost advantage, twice the lifespan, higher strength and thrust, and a substantial noise reduction, making them safer and ideal for helicopter operators flying in noise-sensitive areas like national parks and built-up areas.

In high-reliability industries such as aerospace, defense, and nuclear, embedded software is emerging as a core competitive advantage, driving increasing demand for systems based on safety certification. Ansys SCADE is a model-based solution that supports the entire lifecycle of safety-critical software—from design to certification—for applications such as flight control systems, engine controllers, and cockpit display systems (CDS). It ensures high reliability, real-time performance, and safety compliance required for the development of complex avionics systems. Key Features - Model-based embedded software development and automatic code generation - Compliance with aerospace safety certification standards such as DO-178C, ARINC 661, and FACE™

The Improved Fire Control System (IFCS) PNU / Universal Fire Control System (UFCS) UPNU family represents a true state-of-the-art system approach. Its design features permit ready adaptation and/or optimization to any current or future weapon system or sensor requiring precision pointing and positioning. The PNU / UPNU and its variants point the way for the future direction of the land navigation systems. Utilizing advanced sensors, electronics, software and aiding (GPS and odometer), the PNU / UPNU family delivers precisely what the Army of tomorrow needs — a system designed to remain operationally effective and affordable to support well into the future. Features High-performance RLG-34 ring laser gyros Common architecture and components (Paladin, PIM, Firefinder, IPADS) Embedded 12-channel Selective Availability Anti-Spoofing Module (SAASM) Impervious to jamming (inertial mode) Resistant to jamming (GPS-aided mode) Combat-proven Embedded Built-In Test (BIT) High reliability MTBF, low mean time to repair (MTTR) No periodic calibration required Applications Multiple Launch Rocket System (MLRS) High-Mobility Artillery Rocket System (HIMARS) Pointing and position location

Capable of a wide 18~32-volt operating range, the robust SG50BL is designed with a high-performance brushless motor, magnetic encoder, and durable, hardened steel gears. It includes CAN 2.0 A/B or DroneCAN (formerly UAVCAN) control options with 360 degrees and multi-turn proportional rotation. Its waterproof 50mm case and monster torque range bring the power and durability required for robotic, automation and commercial applications requiring robust force, precision and installed durability. #UAV #UAS #UAM #UGV #UUV #USV

Our commercial aerospace AGSE products are relied upon by aviation companies around the world to keep their aircraft serviced and flying. The test and servicing equipment we engineer and distribute are key to the success of commercial aviation.

Our LiDAR uses a custom-designed laser that separates 1064 nm and 532 nm wavelengths from a single source, with two dedicated receivers capturing each set of data independently. Inside the system, the linear laser beam is refracted at a 10-degree angle through a prism to enable circular scanning. An RF module is also integrated for real-time equipment status monitoring. From circuit board design to component selection, every part of this system was developed in-house by multiple institutions. As a result, we have successfully eliminated reliance on foreign technology.

• Toggle switches • Circuits breakers • Illuminated push buttons • Relays / Relays bases. • Potentiometer.

- Lens cover device: protects the lens from stones and other foreign objects - Manual opening/closing device: allows manual operation in case the automatic mechanism fails due to foreign object blockage or freezing