Hardware

SURI-III is a super multi functioning sight, optimizing firing capabilities for Caliber 50(M2) and AGL(MK19)in the day and night time condition. It could be supported by HMD for User’s shooting position in convenience and for saving Force’s lives. Thermal Camera + Day Camera + LRF + Red Dot Sight + Wireless Goggle + Customized Reticle + Wide Screen presents in One Device

Teledyne FLIR's Tau 2 series offers 40 variants of the most reliable and rugged longwave infrared (LWIR) thermal camera module. Equipped with a simple optica...

Receives vibration signals from an accelerometer installed on the aircraft engine and monitors engine vibration. Processes real-time vibration signals and converts them into IPS AVG units for output. Developed for localization, achieving 50% cost competitiveness compared to equivalent products. - x1 MIL-STD-1553B - x2 UART(RS-422/485) - x2 Accelerometer sensor - Sample rate : Up to 5,000Hz - Size : 220 x 206 x 52 (mm) - Weight : 1.75Kg - Environment : MIL-STD-810G - EMI/EMC : MIL-STD-461G - Power : MIL-STD-704F (28VDC, 10W)

The 200W High Power Amplifier is an L-band amplifier that delivers 200W output with a 60% duty cycle. It provides a gain of over 53 dB, with output flatness of 2 dB depending on the input signal level. At maximum output, it offers ACLR performance of -20 dBc. With a built-in output-stage bandpass filter (BPF), it achieves excellent harmonic suppression of -70 dBc. Built-in monitoring functions include output signal and temperature monitoring.

Investigate the smallest of features with spatial resolution down to 600 nm – A state-of-the-art nano-focus x-ray source, precision stages, and high-quality detectors work together to deliver sub-micron resolution imaging. Perform true 4D imaging with Dynamic CT – High temporal resolution, continuous and uninterrupted scanning, and specialized 4D software tools bring synchrotron-like capabilities to the lab. Implement 3D in situ experiments – continuous sample rotation and scanning enable uninterrupted in situ experiments. Dedicated “no-cable-wrap” interfaces simplify experiment set-up. Accommodate a broad range of samples – UniTOM HR’s high power source (50W), multiple detector options (up to 3) and heavy load stage (45 kg) accommodates samples up to 500 mm diameter X 700 mm high. Maximize system utilization and throughput – A fast frame rate detector and a high flux x-ray source combine for high temporal resolution tomography giving you the ability to scan more samples and accommodate more users.

- A red light mounted on the left side of the aircraft to indicate the aircraft's location - A green light mounted on the right side of the aircraft to indicate the aircraft's location - These lights indicate the aircraft's position, flight direction, and attitude - Visible/IR Mode, Steady/Flash Mode - Light Intensity : FAA FAR 29.1391 ~ 29.1395 - SAE ARP 5825A

NILO® Alloy 36 Bars-Sheets and Plates-Tubes and Pipes-Strip-Wire NILO® Alloy 48 Bars-Strip INCONEL® Alloy 230 Bars-Sheets and Plates INCONEL® Alloy 600 Bars-Sheets and Plates-Tubes and Pipes-Wire INCONEL® Alloy 625 Bars-Sheets and Plates-Tubes and Pipes INCONEL® Alloy 718 Bars-Sheets and Plates INCONEL® Alloy X-750 Bars-Sheets and Plates INCONEL® Alloy HX Bars-Sheets and Plates-Tubes and Pipes INCOLOY® Alloy A-286 Bars-Sheets and Plates NIMONIC® Alloy 75 Bars-Sheets and Plates NIMONIC® Alloy 80A Bars-Sheets and Plates NIMONIC® Alloy 90 Bars-Sheets and Plates-Strip-Wire NIMONIC® Alloy 263 Sheets and Plates UDIMET® Alloy 188 Bars-Sheets and Plates UDIMET® Alloy L-605 Bars-Sheets and Plates Waspaloy® Sheets and Plates Titanium Grade 2 Bars-Sheets and Plates-Tubes and Pipes Titanium Grade 5 (6Al-4V) Bars-Sheets and Plates Material no. 1.4545.4 / 15-5PH Bars Material no. 1.4548.4 / 17-4 PH Bars Material no. 1.4546.9 Bars