- The 2nd generation mightyZAP series supporting dynamic speed & current control as well as position control along with position & current feedback - Built-in drive circuit, position sensor, 12mm diameter coreless DC motor and gear box - 27/40/53/90mm stroke option - Rated Load of 12N ~ 100N according to gear ratio for each stroke (Speed is inversely proportional to Rated Load, so the stronger the Rated Load, the slower the speed.) -Support RS-485 or TTL / PWM communication * TTL / PWM communication version operates by automatically recognizing the input TTL / PWM signal * When using PWM communication, only the position command is available without position feedback (For feedback feature, use TTL or RS-485 communication) Both MODBUS RTU and IR open protocols available (Default : IR Open protocol)

The ENS2000 (Sub-6GHz 5G small cell) is a small cell capable of providing 5G services with a coverage radius of several hundred meters. It supports operator 5G bands such as n78 (3.5GHz) and n79 (4.7GHz) for private 5G. Originally developed for indoor use, but it can also be installed in enclosures such as streetlight cabinets for outdoor deployment when needed.

New generation hydraulic test stand built with hydraulic purification system keeping aircraft flight safer and reduce significantly aircraft maintenance cost.

If it’s on our schedule, you’re invited. As an exhibitor in the Partnership Pavilion, in addition to official show events you also have exclusive access to official Pavilion events. Exhibitors benefit from exclusive access to the Partnership Pavilion events, including the official Pavilion Opening Ceremony and Ribbon-Cutting, off and on-site hospitality receptions, networking events, business and market insight briefings, and topical industry presentations.

[LEO GNSS-R] Satellite : LEO RF Characteristics : GPS L1/L5, Galileo E1/E5a(option) Accuracy : Position ≤ 10m(3DRMS), Velocity : ≤ 1m/s Raw Data Accuracy : Pseudo-Range : 1m(RMS) Carrier-Phase : 10mm(RMS) Data Output Rate : 1Hz 1PPS Accuracy : Sync to GPS Time Data < 1us (1PPS Accuracy < 1.5us) TTFF : Cold Start ≤ 20min / Warm Start ≤ 10min Dara Interface : MIL-STD-1553B, RS-422(Data Interface) [GEO GNSS-R] Satellite : GEO RF Characteristics : GPS L1/L2C/L5, Galileo E1 Accuracy : Position :: ≤ 30m(3DRMS), Velocity : ≤ 1m/s Raw Data Accuracy : Pseudo-Range : 1m(RMS) Carrier-Phase : 10mm(RMS) Data Output Rate : 1Hz 1PPS Accuracy : 2us(RMS)/Sync to GPS Time Data TTFF : Cold Start ≤ 45min / Warm Start ≤ 20min Dara Interface : MIL-STD-1553B EEE Parts : ITAR Free Parts

1. Integrated Production System Equipped with in-house CF-SMC compression molding equipment, we provide a complete one-stop solution—from sheet production to final composite molding—tailored to customer requirements. This ensures both exceptional quality and production efficiency. In line with ESG management, we also utilize our proprietary recycled carbon fiber technology to recycle CFRP waste generated during CF-SMC production. 2. Moldability & Productivity ILSUNG’s carbon fiber SMC technology offers superior moldability compared to conventional continuous CFRP and aluminum. With a rapid curing speed of about 1 minute per 1 mm thickness, it enables high-speed, mass production. Complex and precise geometries can be molded reliably, delivering strong competitiveness for both simple and highly engineered components. 3. Exceptional Lightweight Performance CF-SMC has a lower density than aluminum castings while maintaining high mechanical strength, delivering the optimal lightweight solution for industries where weight reduction is critical. 4. Balanced Performance This technology not only achieves lightweight properties but also ensures a well-balanced combination of mechanical strength, corrosion resistance, dimensional stability, and durability. It maintains stable performance under extreme environments and repeated loads, making it highly suitable for automotive, aerospace, and defense applications where reliability is critical. 5. Cost Competitiveness Compared to CFRP, it provides a lower-cost structure and high-speed molding capability, ensuring excellent price competitiveness. This significantly improves cost efficiency in industries that demand large-scale production—such as automotive, aerospace, and defense—and strengthens its growth potential within the composites market.

The high performance of the aerospace industry, in both technical and economic aspects, is due in part to its control over the supply chain and its quality throughout the value chain (from the buyer to the SME providers). For GIFAS, it is imperative to continue in this way to keep the industry competitive.

Maintenance Increase security and productivity to reduce costs and minimize downtime. Willing to provide our customers with high-performance technical assistance, we offer scheduled and unplanned maintenance interventions, as well as periodic verification of measurement channels using our calibration equipments. Our systems allow us to perform these operations internally or at our customers site.