The X-BEAM TECH HXB Connectors, featuring expanded beam technology, hermaphroditic connection, rugged construction for field deployment have been designed for harsh environment applications such as military tactical communications, avionics, offshore systems, outside broadcast, mining and plant.

The expanded beam technology uses expanded and collimated beams to couple optical fibers without any contact. It could allow for optics to be used in areas that have been quite restrictive due to presence of damage or contamination at the fiber end. Hermaphroditic connector design enables fast deployment by daisy-chaining multiple cable segments. HXB series connectors also enable transfer of electrical signal or power using hybrid insert configuration.

The Transmit/Receive Module splits 2 transmit input channels into 32 output channels. Each channel delivers an output power of at least 3.2 W with a transmit efficiency of 35.5% or higher. It features independent phase control for each transmit channel. On the receive side, 32 input channels are combined into two output channels. The total receive gain is 34 dB or greater, and each channel supports individual gain and phase control. The noise figure is 3.5 dB or lower per channel. Built-in monitoring functions include internal temperature monitoring and output signal monitoring.

- Long life and precise movement control through fine-tuning - Shaft diameter 5mm~ - Accuracy G3~G7 - Shaft length differs depending on material, size, accuracy of shaft - Efficiency 85% or higher

Hydraulic top bracing is an attenuation device installed between the main engine and the hull of the ship to reduce thermal expansion and vibration from the main engine to natural frequencies. The operating principle is an automatic control operating system through in/out and on/off the operating range of the hydraulic top bracing according to the rpm of the main engine. The number of hydraulic cylinders per engine is typically 2, 4, 6 depending on the type of engine, up to 8 are installed if necessary, and 1~2 of control panels are installed.

The MD250MW is a 15mm, metal gear, mini servo with dual ball bearings and a cored motor with carbon brushes. Engineered with a programmable digital amplifier and magnetic encoder to deliver high performance and reliability for remote, unmanned aerial vehicles and ground-based automation applications. Operating via DroneCAN (formerly UAVCAN) command protocol at a wide voltage range from 4.8~7.4 volts, this compact actuator produces impressive torque and high speeds in its mini class. The MD250MW servo is ideal for a variety of applications requiring an efficient balance of performance and cost. #UAV #UAS #UGV

With advanced 3D printing, our turbine blades redefine manufacturing—delivering faster development, higher efficiency through superior quality, and innovative design freedom.

Slim, ergonomic full coverage vest Perfect fit for women 360 degree soft armor protection Taktic buckle system for quick connect & release Antibacterial/FR treated padded spacer mesh system Poly mesh cummerbund for increased ventilation Flush admin chest pocket with internal elastic straps PALS webbing for MOLLE attachment Zipper for MV Assaulter's Zip-On Back Panels Increased structural integrity and reduced rear deformation Compatible with our entire accessories line Soft armor included Composition Material : 500D Cordura® + ARAMID / PV® Size : Small : 8.5" x 11.5" Plate Pocket Medium : 9.3" x 12.3" Plate Pocket Large : 10" x 13" Plate Pocket XLarge : 10.9" x 13.8" Plate Pocket Colors: MC (MultiCam) BMC (Black MultiCam) BK (Black) RG (Ranger Green) CYT (Coyote Brown)

Military and Commercial