- 1 channel - Up to 100 FBG sensors - Up to 50 kHz sampling frequency

Using a data storage module and a series of high-speed switches, our solution offers expandable memory up to 64 TB and high-speed processing power. Along with our attendant control panel, designed to reduce the crew's workload, we offer a complete end-to-end solution.

It is a system that performs missions such as monitoring, surveillance and reconnaissance by ejecting and launching a foldable fixed-wing drone from the canister(tube) launcher. It is equipped with EO/IR Cameras (Electro-Optical / Infra-Red), which are mission equipment for reconnaissance, so that effective day and night image information can be collected. The gathered image information is transmitted to the ground control system (GCS) in real time while detecting and tracking the target by applying AI-based image processing technology. The foldable fixed-wing UAV has a simple structure and light weight, so it can be stored and transported in the canister launcher, and can be operated immediately so that it can be operated without time delay, and if necessary, the air vehicle can be retrieved and re-used by using a net-type recovery system.

EMCORE’s exclusive photonic integrated chip (PIC) technology delivers improved reliability and repeatability. The precision non-ITAR GEO-FOG 3D Dual features two GNSS antennas on a fixed PTK baseline to offer increased heading, pitch, and roll accuracy for static and dynamic applications where a single antenna system can be problematic. This dual antenna INS is the best choice for systems requiring heading at start-up or in low dynamic conditions. Highlights Data rate 10x faster than other available systems Cutting-edge sensor fusion for dependable, precise navigation in a full array of applications and conditions Six degrees of freedom (DoF) IMU with integrated gyros and accelerometers Technology Details Photonic Integrated Chip Technology EMCORE’s new photonic integrated chip (PIC) technology reimagines FOG technology by replacing individual fiber components with an innovative integrated planar optic chip. This results in a FOG with PIC Inside™ that’s even more reliable and delivers superior repeatability unit-to-unit. With three of these integrated photonic gyros at its core, the P-1750 IMU enables the GEO-FOG to provide the safe, accurate performance autonomous platforms demand. Learn More DSP Technology EMCORE’s DSP electronics improve FOG performance in critical areas such as scale factor and bias vs. temperature, scale factor linearity, and maximum input rate. EMCORE’s exclusive DSP design overcomes the limitations of analog signal processing, eliminating temperature-sensitive drift and rotation errors. GEO•FOG Manager The GEO•FOG Manager is ideal when integrating EMCORE’s GEO•FOG 3D and GEO•FOG 3D Dual INS. Learn More Developer’s Kit for Rapid Integration The KVH FOG/IMU Developer’s Kit includes easy-to-use software to accelerate your IMU and FOG integration, development, and interface efforts.

NICKEL 200 / 201 -Bars-Sheets and Plates-Tubes and Pipes NICKEL 270 -Sheets and Plates-Wire MONEL® ALLOY 400 -Bars-Sheets and Plates-Tubes and Pipes MONEL® ALLOY K-500 -Bars NILO® Alloy 36 -Bars-Sheets and Plates-Tubes and Pipes NILO® Alloy 42 -Bars-Sheets and Plates NILO® Alloy 48 -Bars-Strip NILO® Alloy K -Bars-Sheets and Plates-Wire INCONEL® Alloy 230 -Bars-Sheets and Plates INCONEL® Alloy 600 -Bars-Sheets and Plates-Tubes and Pipes-Wire INCONEL® Alloy 601 -Bars-Sheets and Plates-Tubes and Pipes-Wire INCONEL® Alloy 617 -Bars-Sheets and Plates INCONEL® Alloy 625 -Bars-Sheets and Plates-Tubes and Pipes INCONEL® Alloy 625LCF® -Sheets and Plates INCONEL® Alloy 693 -Sheets and Plates-Tubes and Pipes INCONEL® Alloy 718 -Bars-Sheets and Plates INCONEL® Alloy X-750 -Bars-Sheets and Plates INCONEL® Alloy C-276 -Bars-Sheets and Plates-Tubes and Pipes INCONEL® Alloy HX -Bars-Sheets and Plates-Tubes and Pipes INCONEL® Alloy 22 -Bars-Sheets and Plates-Tubes and Pipes INCOLOY® Alloy 800 H / HT -Bars-Sheets and Plates-Tubes and Pipes INCOLOY® Alloy 825 -Bars-Sheets and Plates-Tubes and Pipes INCOLOY® Alloy DS -Bars-Sheets and Plates INCOLOY® Alloy 330 -Sheets and Plates INCOLOY® Alloy A-286 -Bars-Sheets and Plates NIMONIC® Alloy 75 -Bars-Sheets and Plates NIMONIC® Alloy 80A -Bars-Sheets and Plates NIMONIC® Alloy 90 -Bars-Sheets and Plates-Wire-Strip NIMONIC® Alloy 263 -Sheets and Plates UDIMET® Alloy 188 -Bars-Sheets and Plates UDIMET® Alloy L-605 -Bars-Sheets and Plates Waspaloy® -Sheets and Plates

The R10s is a reconnaissance and surveillance drone capable of conducting up to two hours of mission flight, transmitting real-time information such as target location and scale to the ground control system. Based on the company’s innovative vertical take-off and landing (VTOL) platform “Bluebird,” the R10s is equipped with EO/IR optical sensors and a laser range finder for advanced target detection. Upon receiving mission orders, the R10s takes off vertically, transitions to fixed-wing flight, and proceeds to the designated area. Its onboard cameras and sensors identify and track targets, relaying precise coordinates to the ground control system. With modular wing replacement, the R10s can be configured for extended endurance of around two hours or for high-speed maneuverability, ensuring optimal adaptability and mission effectiveness across diverse operational scenarios.

Digitally recorded distressed and alarmed birds, along with the sounds made by their natural predators are broadcast through high output weather-resistant speakers. This triggers a primal fear and flee response. Super easy installation figure makes the systern portable across crop and place Replaceable, customizable species specific bio- acoustic sound chip according to birds kinds and specific regions Effective Coverage: Up to 50m for one single direction, approximately 5,000 square meter Technology integrated operation system enables sound duration and interval to prevent habituation to the sounds Overcharge, over-discharge protection Sound Pressure: 120-130 db at 1 meter Frequency: 3-5 kHz With severe bird infestations, it is always recommended to use at least 2 bird control methods together. Sonic cannon is a very good to use in conjunction with the bio-acoustic bird repeller.