The operation of robotic inspection systems in an industrial environment requires a reliable control station. The second generation integrated control station -ICS 2- gives operators an all-in-one tool. Supplied in a rugged hardshell case (Pelicase®), embedded components such as a 21.5-inch touchscreen, high-performance PC or joystick can be selected according to industry standards. It also boasts a 10-year spare parts guarantee as well as extreme robustness and reliability even in harsh environments. Simplicity and ease of operation were key when developing ICS 2. The operator connects the robotic platform with one single cable and using the integrated joystick, operation is simple and self-explanatory.

[Cutting by water jet] Micro water jet cutting: The micro water jet enables a refined process to be carried out in precision cutting. This high-precision technology reduces the jet diameter by a factor of 5 and makes water jet cutting more precise by a factor of 10. The micro water jet achieves a cutting accuracy of +/- 0.01 mm and a positioning accuracy of ±0.005 mm. The proven advantages of the cold cutting process remain unchanged. In the pure water process, the cutting width was reduced to 0.2 mm in the abrasive process for hard materials such as nickel-based alloys and titanium. The new technology controls the cutting process and manipulates the cutting path depending on the contour and speed enabling a highly precise cut. Standard waterjet cutting: Water jet cutting is highly efficient and at the same time less severe than other cutting techniques. Low process forces and thermal loads prevent bending or melting. We can cut filigree delicate contours from practically all nickel alloys and titanium alloys. Using our standard process we can cut a range of shapes and dimensions according to customer requirements and drawings and achieve tolerances of +/- 0.1 mm or +/- 0.2 mm.

aviation fuel refueling cart : Mobile refueling cart that can easily refuel light aircraft and helicopters Sump recovery system : Collect the drained/sumped aviation fuel from the aviation fuel refueling system, easily sample and test it, and then decide whether to drain it or return it to the system. Aviation fuel refueling system : The aviation fuel refueling system is compactly constructed with a skid for easy use and installation.

In response to USAF IPSAFE contract and developed as part of the LSI’s MACK-5A solution for the modernization of the ACES II Ejection Seat Survival System, the QUAD FIRE™ is LSI’s newest innovative addition to its survival accessory line. This unique survival tool contains four fire starting devices: an arc lighter, a ferro rod and striker, a fresnel lense, and wind/waterproof matches, plus Pyro Putty™ Fireball Tinder.

Side shells, wing shells and fuselage structures are made of CFK, GFK, aluminium or organic sheets and get connected during production. Sealants are used to seal the connection surfaces. These are usually two-component polysulphides, which have to be applied in different geometries. Typical applications are: Fillet sealings, oversealings, interface sealings and seal caps. Due to their properties, polysulfides require very low pressure and shear handling. The compressibility of the fillers contained in the medium requires a high level of expertise and a coherent overall system from material removal to application. With manual application, long production times and high material ejection have a negative influence on the complete process. Complex quality standards are required due to the risk of human error. With the in-house developments of the vipro-DUOMIX from ViscoTec, this process can be depicted fully automatically. The individual nozzle design is also adapted to each application. The result is a controlled dosage in compliance with the specifications and at the same time the highest repeat accuracy.

6 Series Mixed Signal Oscilloscope; (4) FlexChannels with 62.5M record length, 1-year warranty, Certificate of Traceable Calibration Standard

Wooribyul Co., Ltd. will continue to develop the best products and solutions using wired/wireless technologies accumulated over a long period of time and provide customized services to customers

Vehicle-type RF Jammer Systems provide protection to VIPs and convoys against remote-controlled explosives. These systems create a protective shield through RF broadcasting and neutralize threats activated by radio, mobile phones and wireless remote-controlled devices. Vehicle-type RF Jammer Systems can be easily integrated aboard all kinds of vehicles, and allows for reprogramming against changing situations. Continuous broadband operation Control from hand terminal Module selection Malfunction warning VSWR warning