The NSP-8 is IMSAR’s most powerful radar. It is capable of advanced Synthetic Aperture Radar (SAR), Moving Target Indication (MTI), and Magnitude Change Detection (MCD). When paired with an airborne server, it can even produce SAR Motion Video (SMV). IMSAR adds value to its exceptional engineering with a production time much faster than industry standard. The NSP-8 is designed for durability and thoroughly tested with a Mean Time Before Failure (MTBF) of over 2,000 hours. Additionally, it’s weatherized for optimal performance over land and sea. With this sensor, IMSAR’s users can understand the bigger picture.

In this video, you will learn about the capabilities and performance benefits of our 5G mmWave semiconductor test system, the GENASYS Semi TS-900e-5G. GENASY...

The SCXMC-AURORA is one of Seedcore’s flagship products, designed for high-speed optical data communication through an XMC interface. Utilizing the Xilinx Aurora 64B/66B protocol, it supports four transmit/receive channels, each operating at 10.3125 Gbps via integrated optical transceivers. A device driver program is required for operation, and the Linux driver can be downloaded from the product information page on Seedcore’s website. This module is deployed in the M-SAM air defense system, providing reliable and high-speed data transfer between mission-critical embedded components.

To guarantee maximum safety and reliability, our DA 30 features a brushless motor and a contactless wear-free position sensor. This means maximum service life with the greatest‐possible power delivery and its design prevents electromagnetic emissions (EMI) caused by brush sparking. The housing made of saltwater‐resistant aluminum is HART‐coat treated, meets the IP‐67 standard for water and dust sealing and provides an integrated Sub‐D connector (MIL spec. circular connector or cable gland on request). Brackets integrated in the housing for horizontal and vertical assembly. 8‐fold, ball‐bearing supported, steel gear train, drive shaft with ANSI multi‐tooth. The DA 30 series can be equipped with a standard PWM input (Pulse Width Modulation) that has two different interfaces: a differential, galvanic isolated interface (Opto‐Coupler) and a single‐ended interface with CMOS levels that is also used to program the servo parameters. It includes analog position feedback to detect the drive shaft position. A differential RS‐422 PWM interface can be chosen instead of the opto‐coupled interface. The DA 30 with digital serial command interface (RS‐485) receives its commands via a CRC secured protocol. It can return not only the shaft position in digital format, but also several diagnostic data such as the level of the supply voltage, current consumption and the temperature of the motor and electronics in digital form (optionally also the humidity within the actuator case). These kind of diagnostic capabilities help to determine the health state of the actuators before, during and after deployment.

A Main Generator installed in the K2 main engine that supplies power to the system.

PTO SHAFT, Proven Performance, Realized in Reality CTLA's Power Transmission Shaft (PTO-shaft) is a key component of the aircraft secondary powertrain, transmitting the high-speed rotational power generated by the aircraft engine drive unit (EMAD) to the gearbox (AMAD). By applying high-strength, lightweight titanium material for the first time in the world, we have achieved both weight reduction and durability, while implementing outstanding stability and reliability through our proprietary electron beam welding technology optimized for high-speed rotation and high-speed precision balancing technology. In particular, this product, which is currently being mass-produced and delivered to the KF-21 fighter jet, has demonstrated excellent power transmission performance while minimizing vibration even in extreme environments. CTLA is leading technological innovation in the field of high-speed rotational machinery, spearheading the self-reliance of domestic aircraft components and advancing into the global market.

The SC-SSGMRTM, a Seedcore Co., Ltd representative product, is a backplane transmission module that performs the I/O function of the SSGM(Synchronous Signal Generation Module). When the SSGM(Synchronous Signal Generation Module) board is plugged into the motherboard(Backplane) in front of the Chassis, you can extend the I/O function of the board by plugging the SC-SSGMRTM board into the back of the Backplane. Three 37-pin Micro D-sub ports are used to send synchronization signals generated by SC-SSGM to the outside or to receive external synchronization signals, Three separate MMCX output ports are prepared to support test equipment such as oscilloscopes, and you can convert them to various signals and output them.

Flow Switches