The maximum transmission distance varies based on the following frequency-related specifications. Camera Frequency Max Cable Length ================ =============== 20 ~ 60 MHz 10 m 60 ~ 80 MHz 7 m 80 ~ 85 MHz 5 m The PoCL Bypass function supports Power over Camera Link (PoCL) operation from the Frame Grabber to the selected camera. However, the power supply to unselected cameras is automatically disabled. To prevent power cutoff, separate power must be provided to the cameras. Configurations are available as follows, including image signal amplification. [Features of CLM-30C4]  Fully supports the Camera Link interface (Area/Line Scan).  Provides manual (switch) or remote (RS232) camera selection.  Allows selection from one of four cameras configured for Base (Layer 1) or Medium/Full (Layer 2) levels.  Supports Base/Medium/Full setups (CC1~4, RS232, LVAL, DVAL, FVAL)  PoCL bypass function: Automatically powers only the selected camera when PoCL-compatible cameras, frame grabbers, and cables are used.  Supports pixel frequency from 20 to 85 MHz.  Supports PoCL signal bypass (patented).  Enables lossless transmission.  Provides additional full-duplex RS232 communication at up to 256 Kbps.  Features a locking DC power jack (Molex).

This unit(SOU) supplies sealing oil to prevent mixing of hydraulic oil and liquefied methanol gas inside of FBIV(Fuel Booster Injection Valve) when the main engine operates. SOU is divided into large bore main engine(60 bore over) and small bore main engine(50 bore below) type by the number of membrane accumulator. The main components consist of an oil tank, an electric motor, a hydraulic gear pump, an oil filter, a control block, accumulators, and various senses, transmitters and indicators.

Superior Performance: Stable braking power under extreme operating conditions, from taxiing to high-speed landings. Proven Reliability: Robust structures and advanced materials that guarantee long service life with minimal maintenance. Optimized Safety: Redundant design features and compliance with international aviation standards to meet the highest levels of operational safety. Custom Solutions: Tailored brake designs to fit the specific requirements of fixed-wing aircraft, rotary aircraft, and unmanned aerial platforms.

Designed and suitable for a wide range of missions. It is light and ruggedized and its multi-purpose capability provides freedom of action for the commander in all environments.

We are recognized domestically and internationally for our technology and quality by supplying products manufactured based on our accumulated know-how and excellent technology to power generation equipment companies at home and abroad.

GE Aviation's Systems business is equipping militaries with the solutions needed to succeed. As a leading supplier of integrated systems and technologies for combat aircraft, military transport, helicopters, land vehicles and unmanned aerial vehicles (UAVs), GE is enabling armed forces around the world to improve reliability and enhance operational performance.

Developed by MPS Microsystems, the voice-coil nano-positioner unites a Lorentz-force motor, flexure guidance and on-board electronics inside a 65 × 60 × 38 mm envelope. Standard travel is 2.88 mm, extendable to 7 mm with the same coil, suiting microscope objectives, small mirrors and sensors that demand friction-free motion. Bidirectional repeatability stays within ±1 µm over a 360 µm stroke and ±2.5 µm across the full stroke. We can tailor mounting plates, objective clamps and cable exits to suit your specific requirements, ensuring that this voice-voil actuator can be integrated seamlessly into your system.

NILO® Alloy 36 Bars-Sheets and Plates-Tubes and Pipes-Strip-Wire NILO® Alloy 48 Bars-Strip INCONEL® Alloy 230 Bars-Sheets and Plates INCONEL® Alloy 600 Bars-Sheets and Plates-Tubes and Pipes-Wire INCONEL® Alloy 625 Bars-Sheets and Plates-Tubes and Pipes INCONEL® Alloy 718 Bars-Sheets and Plates INCONEL® Alloy X-750 Bars-Sheets and Plates INCONEL® Alloy HX Bars-Sheets and Plates-Tubes and Pipes INCOLOY® Alloy A-286 Bars-Sheets and Plates NIMONIC® Alloy 75 Bars-Sheets and Plates NIMONIC® Alloy 80A Bars-Sheets and Plates NIMONIC® Alloy 90 Bars-Sheets and Plates-Strip-Wire NIMONIC® Alloy 263 Sheets and Plates UDIMET® Alloy 188 Bars-Sheets and Plates UDIMET® Alloy L-605 Bars-Sheets and Plates Waspaloy® Sheets and Plates Titanium Grade 2 Bars-Sheets and Plates-Tubes and Pipes Titanium Grade 5 (6Al-4V) Bars-Sheets and Plates Material no. 1.4545.4 / 15-5PH Bars Material no. 1.4548.4 / 17-4 PH Bars Material no. 1.4546.9 Bars