High impedance D-Sub connectors are designed to ground the outer shield of a twinax or quadrax contact directly to the shell of the connector. A multi-finger ground spring fixed around the shell provides a multi-point contact engagement that affords superior EMI shielding. The end result is an extremely low contact resistance when measured from the contact outer body to the connector flange, ensuring minimal RF noise and high durability of over 500 mating cycles.

This product supports the following transmission standards. Designation Bit Rate ========== ========== CXP-1 1.250 Gbps CXP-2 2.500 Gbps CXP-3 3.125 Gbps CXP-5 5.000 Gbps CXP-6 6.250 Gbps CXP-12 12.500 Gbps The CXR-2C amplifies and transmits image signals from 1/2-channel CoaXPress cameras to a PC frame grabber. Typically, transmission matches the distance between the camera and the device. Transmission distance depends on the coaxial cable type, and due to significant variability, specific distances are not provided.

Integrated Soldier Power / Data Hubs are Personal Area Network (PAN) hub and interconnect systems providing network data access, peripheral connectivity and smart battery power management for dismounted soldier C4ISR electronics in Digitally Aided Close Air Support (DACAS) missions, including precision targeting, tactical radio communications, real-time video downlink, night vision technologies, GPS/navigation, blue force tracking, personal computing and smart phone integration.

The MAGIC1A is a rugged 3U VPX SWaP-C3 high-performance embedded computer combining an Intel Xeon E3-1505M v6 CPU and NVIDIA Quadro P2000 GPU, offering strong compute performance, broad I/O, rugged resilience, and flexible software support. • Xeon E3-1505M v6 quad-core CPU + Quadro P2000 GPU → ~2.3 TFLOPS • Ethernet, USB, serial, MIL-STD-1553, ARINC 429, DisplayPort/DVI, GPIO; up to 8 TB removable SSD with fast-purge • MIL-STD rated, baseplate or fan cooling; −40 °C to +65 °C range • Supports Linux/Windows/VxWorks & CUDA/OpenCL/DirectX/OpenGL; includes AXIS software toolkit

This solution leverages LLM-based data interpretation technology to detect process anomalies in advance, providing alerts and countermeasures before defects occur, thereby ensuring sufficient response time. It also analyzes issues such as positional misalignment or print degradation patterns during the process, matches them with various event timelines, identifies the root causes of defects, and delivers the findings in the form of analytical reports

Threaded bushing enables localized reinforcement of and attachment to panel structure. Supplied with disposable installation fixture. 1.25" Flange Diameter. SIZES: Imperial fine thread sizes from 10-32 (.190"-32) to 3/8-24 (.375"-24), Imperial coarse thread sizes from 8-32 (.164"-32) to 3/8-16 (.375"-16), and metric thread sizes from M5 to M8. 1.25" Flange Diameter. Grip lengths from 0.25" to 1.50". MATERIALS: Aluminum, 300 Series Stainless Steel, A-286 Stainless Steel, 316 Stainless Steel, and Titanium. Optional epoxy primer. FEATURES: Standard 1.25" diameter flange, 0.75" x 1.25" trimmed flange optional.

Digitally recorded distressed and alarmed birds, along with the sounds made by their natural predators are broadcast through high output weather-resistant speakers. This triggers a primal fear and flee response. Super easy installation figure makes the systern portable across crop and place Replaceable, customizable species specific bio- acoustic sound chip according to birds kinds and specific regions Effective Coverage: Up to 50m for one single direction, approximately 5,000 square meter Technology integrated operation system enables sound duration and interval to prevent habituation to the sounds Overcharge, over-discharge protection Sound Pressure: 120-130 db at 1 meter Frequency: 3-5 kHz With severe bird infestations, it is always recommended to use at least 2 bird control methods together. Sonic cannon is a very good to use in conjunction with the bio-acoustic bird repeller.

At trade shows around the world, Kallman’s flagship service, the Partnership Pavilion, is America’s full-service, business-to-business headquarters; the on-site hub of the U.S. and Canadian export community. The Partnership Pavilion covers Aerospace; Defense; Maritime; Medical; Mining; Oil & Gas; and Food industries. The Pavilion presents the perfect platform for business, maximizing U.S. and Canadian exhibitor exposure and creating a networking forum. Prime exhibit space & quality designs: Built on the idea that an organized group of exhibitors is easier to find than stand-alone booths scattered throughout a show, the USA and Canada Partnership Pavilions always attracts a crowd. Professional Amenities and Staff: Every USA and Canada Partnership Pavilion is staffed by an experienced event team dedicated to your success. Whether you need a liaison to the organizers, tech support, a contractor, caterer, translator, printer, or help tracking down a shipment... we’re here to help. Exclusive events and programs: As an exhibitor you have exclusive access to all Partnership Pavilion events; including our Opening Ceremony and Ribbon-Cutting, off and on-site hospitality receptions, business and market insight briefings, and special presentations.