This system product is a product that directly supplies and heats lubricant oil for smooth operation of the main engine cylinder’s metallic and mechanical movement. Lubricator, a product that supplies lubrication directly to the main engine cylinder liner, can control injection timing and consumption using an electronic control method that responds to the movement of the main engine piston. The alpha lubricator system is based on an algorithm controlling the cylinder oil dosage proportionally to the sulphur content in the fuel and, fuel consumption on particular load of engine. Minimum cylinder oil dosage is required to provide an adequate oil film and detergency properties. Everllence and WIN GD engines are currently applying the second generation Lubricator type, the Everllence type is Mk-I and the WIN GD type is Mk-ε (Epsilon).

Our products include latches, hinges, keepers and hold open rods.

EM21 is designed to be used behind the EOST EDS Red Dot Reflex Sight. EM21 can be mounted right behind the EOST EDS (or any of other dot and holographic sight) to give 3 times magnifying view. EM21 helps shooter convert the optical magnification so that he can have better target acquisition and fast target engagement capability. The ability to transition between the two distances almost instantly and still maintain weapon accuracy is easily achieved with our EM21. Simply switch the magnifier out of the way for a quick 1X targeting. EM21 can be used for hunting/recreational purpose.

Continental connectors are manufactured with highest quality materials. Our contacts are machined to close tolerances as opposed to stamped and formed styles. All molding compounds are glass reinforced, flame retardant and able to withstand severe environmental and mechanical requirements. Military connector families conform to the highest Defense Supply center (DSCC) standards, which require qualification testing and continued periodic requalification under the surveillance of government representatives to maintain our Company Qualified Product Listing (QPL)

6 Series Mixed Signal Oscilloscope; (4) FlexChannels with 62.5M record length, 1-year warranty, Certificate of Traceable Calibration Standard

Shock Tech designs, develops, manufactures and tests shock attenuation and vibration isolation systems for the most demanding environments. Customized solutions are provided with application requirements analyzation. Low Profile & Avionics Mounts are a series of all attitude, mid to high frequency, low profile mounts, used in a variety of applications including airborne avionics, etc. Bushing Mounts are a series of all attitude, low cost mounts, protecting against both vibration and shock, used in a variety of applications including airborne avionics, etc.

SCD’s 17μm VOx Microbolometer technology is the ideal choice for any LWIR VGA system. With its exceptional image quality, ultra-low NETD, rapid imaging capability, and low weight, SCD’s Microbolometer ranks as one of the top LWIR Video Engines on the market. Designed for applications that require minimal Size, Weight, and Power (SWaP), SCD’s VOx technology offers flexible and easy-to-deploy thermal imaging solutions. SCD is always by our customers’ side, providing them with the best solutions tailored to their needs.

To guarantee maximum safety and reliability, our DA 30 features a brushless motor and a contactless wear-free position sensor. This means maximum service life with the greatest‐possible power delivery and its design prevents electromagnetic emissions (EMI) caused by brush sparking. The housing made of saltwater‐resistant aluminum is HART‐coat treated, meets the IP‐67 standard for water and dust sealing and provides an integrated Sub‐D connector (MIL spec. circular connector or cable gland on request). Brackets integrated in the housing for horizontal and vertical assembly. 8‐fold, ball‐bearing supported, steel gear train, drive shaft with ANSI multi‐tooth. The DA 30 series can be equipped with a standard PWM input (Pulse Width Modulation) that has two different interfaces: a differential, galvanic isolated interface (Opto‐Coupler) and a single‐ended interface with CMOS levels that is also used to program the servo parameters. It includes analog position feedback to detect the drive shaft position. A differential RS‐422 PWM interface can be chosen instead of the opto‐coupled interface. The DA 30 with digital serial command interface (RS‐485) receives its commands via a CRC secured protocol. It can return not only the shaft position in digital format, but also several diagnostic data such as the level of the supply voltage, current consumption and the temperature of the motor and electronics in digital form (optionally also the humidity within the actuator case). These kind of diagnostic capabilities help to determine the health state of the actuators before, during and after deployment.