Missions is the only commercially available analysis tool which brings together aircraft definition, aircraft performance and cost investigations in a single environment and delivers reliable projections of key metrics such as payload capacity, maximum range and direct operating cost. Excellent runtime performance and the integrated analysis environment ensure fast results even when dealing with large route networks.

Temperature Calibrated Pressure Sensors The Air Data Unit features very high accuracy absolute and differential pressure sensors. These are factory calibrated over a wide temperature range to further increase measurement accuracy and provide the best air data possible through varying conditions. Power Up Self-Calibration On top of factory temperature calibration, every time the air data unit powers up, it performs a self excitation calibration to adjust for small deviations of bias and scaling error. This allows the system to compensate for calibration aging and means that it never needs to be returned to the factory for recalibration. Reliability The Air Data Unit is built on top of a safety oriented real time operating system and all software is designed and tested to safety standards with fault tolerance. Its communication interface is optically isolated and the hardware is designed and tested to MIL spec.

FMP is built around Moog’s world-renowned military motion control technology. Options include integration of Moog’s high-performance stabilization and weapon stores management systems (SMS), providing missile firing capability to suit any mission. Missiles previously only launchable from helicopters may now be fired from ground vehicles with missile combinations able to suit any mission need from any platform.

Wing shells, side shells and fuselage sections are usually made of carbon fibre composites and glued together during the production process. With many components, a groove or an open edge remains after the bonding process, which must be filled or sealed. A modified two-component epoxy resin is often mixed and then applied manually. This often entails long production times and complex quality controls. Equally high material costs due to the processing of materials from cartridges. ViscoTec defies short pot life and materials that are difficult to handle: Thanks to a coherent overall system from material removal to material application, this process can be automated. The two components are taken separately from cartridges, hobbocks or drums and fed via hose lines to a two-component dosing system. Only at the very end of the process they are mixed in a static mixing tube and applied to the substrate (e.g. via a nozzle). The process is controlled and monitored by pressure sensors.

A VGA (640×480) LWIR (8–12 µm) uncooled micro-bolometer module with 12 µm pixel pitch and NETD ≤ 50 mK, paired with an F1.0, 10.7 mm EFL lens delivering H42° / V31.5° / D52.5° FOV. It streams at 30 Hz in either UVC (USB-C, 5 V) or GMSL1 (FAKRA, 12 V), with power consumption < 1.9 W. The compact, lightweight housing (30×30×58.9 mm for UVC; 30×30×70.9 mm with FAKRA for GMSL1; IP65; −40 °C to 85 °C) makes it well-suited for autonomous vehicles, UAVs, and security systems, providing reliable day/night thermal perception of pedestrians, animals, and objects in adverse weather.

Experience unparalleled clarity and precision across the full zoom range with Ophir's MWIR cooled and LWIR uncooled long-range IR zoom lenses. Providing MTF close to the diffraction limit, these lenses excel in long detection, recognition, and identification (DRI) ranges, making them ideal for diverse commercial, surveillance, and homeland security applications. Available in various FPA formats, including High Definition XGA and SXGA. Key characteristics: • High MTF • Accurate thru-zoom boresight • Focus and F# maintained through the full zoom range • Rugged design for toughest environments • Zoom up to X30 • Fast FOV change • Diffraction-limited optical design • Athermal compensation • High durability, low reflection hard carbon AR coating Contact us to set a meeting at ADEX Seoul for further discussion.

With advanced 3D printing, our turbine blades redefine manufacturing—delivering faster development, higher efficiency through superior quality, and innovative design freedom.

PILAR Ground Version can be deployed to enhance the surveillance and security of sensitive sites and events. It is the ideal product configuration to ensure optimum operational success in both defence and homeland security scenarios such as: - Military FOBs - Border Control Post - Embassies - VIP gatherings (G8, parades, commemorations, etc.) - Communities (airports, campus, sporting events, railway station, etc.)