Drone Hunter FD is a powerful countermeasure against drone threats. Designed to cover ISM bands and GNSS L1 , L2, L5 it effectively neutralizes a single drone or multiple drones approaching in a direction from a distance of 5km and operating within its antenna beam width. It is equipped with high-power amplifiers and signal generators to enable powerful multi-band continuous jamming. This field-proven solution operates with a positioner that receives data from a seamlessly integrated detection/identification system by OURANOSTM C2 or third-party systems. In addition, it can be used as a stationary/mobile solution.

Mil-COTS Isolated DC-DC converters brings SynQor’s field proven high-efficiency synchronous rectifier technology to the Military/Aerospace industry. These “off-the-shelf” converters are compatible with the industry standard format, operate at a fixed frequency, and follow conservative component derating guidelines. MilQor products are designed and manufactured to comply with a wide range of military standards.

The SWIR & NIR 25-250mm f/5.5 (NFOV) f/4.0 (WFOV) continuous zoom lens is a first to market low-Size, Weight, and Power (SWaP), compact lens, for the newly introduced 5μm SXGA, as well as for 10μm SXGA, and 15μm VGA SWIR detectors. The SWIR & NIR zoom lens employs a unique mechanical and optical design, resulting in an all-around smaller and lighter unit with only 860gr in weight, and 224mm in length, making it approximately 60% lighter than similar existing SWIR lenses. The SWIR lens is also chromatically corrected to support a broader short-wave IR wavelength regime from 0.7-1.7μm and operates with minimal distortion. The SWIR & NIR 25-250mm f/5.5 (NFOV) f/4.0 (WFOV) continuous zoom lens presents an unrivaled combination of SWaP capabilities, detection range exceeding 26km. Product features: • Continuous zoom in the 0.7-1.7μm SWIR regime • Designed for 5μm, 10μm SXGA & 15μm VGA SWIR detectors • Lightweight (<860 gr) • Detection range >26 km • Enables laser-line detection

Quadro expands the capabilities of Exolaunch's microsatellite separation systems with a four-point offering tailored to match the Arrow 150 satellite with masses up to 250 kg. It is currently the only separation system which is qualified to fly the Arrow 150 platform on the SpaceX Transporter missions. Quadro was crowned the most innovative separation system in Europe by winning the Innovation in Space Award 2023 at the European Space Summit, celebrating its unique blend of flight-proven technology and cutting edge four-point design securing access to orbit for the next generation of microsatellite buses.

FRAZIER AVIATION'S Manufacturing Resource Planning is defined by APICS as a method for the effective planning of all resources of a manufacturing company. Ideally, it addresses operational planning in units, financial planning in dollars, and has a simulation capability to answer "what-if" questions and extension of closed-loop MRP.

Our products serve the clients in military and aerospace industries, who require high performance with strength and ability to perform at extreme temperatures and pressures.

The maximum transmission distance varies based on the following frequency-related specifications. Camera Frequency Max Cable Length ================ =============== 20 ~ 60 MHz 10 m 60 ~ 80 MHz 7 m 80 ~ 85 MHz 5 m The PoCL Bypass function supports Power over Camera Link (PoCL) operation from the Frame Grabber to the selected camera. However, the power supply to unselected cameras is automatically disabled. To prevent power cutoff, separate power must be provided to the cameras. Configurations are available as follows, including image signal amplification. [Features of CLM-30C4]  Fully supports the Camera Link interface (Area/Line Scan).  Provides manual (switch) or remote (RS232) camera selection.  Allows selection from one of four cameras configured for Base (Layer 1) or Medium/Full (Layer 2) levels.  Supports Base/Medium/Full setups (CC1~4, RS232, LVAL, DVAL, FVAL)  PoCL bypass function: Automatically powers only the selected camera when PoCL-compatible cameras, frame grabbers, and cables are used.  Supports pixel frequency from 20 to 85 MHz.  Supports PoCL signal bypass (patented).  Enables lossless transmission.  Provides additional full-duplex RS232 communication at up to 256 Kbps.  Features a locking DC power jack (Molex).

The LHS/LHZ Series delivers railway industry-leading performance for high reliability, specialty, float mount connections, ideal for blind mating. Hypertac® hyperboloid contact technology ensures immunity to shock and vibration and minimal contact resistance. The LHZ Series is available as specific version with high-speed Quadrax contacts.