The D56M differential pressure switch provides high precision measurement across a wide range of low-differential pressure conditions in a package smaller than other units of comparable capability. The membrane senses changes between the “high” and “low” pressure inlets while offering excellent repeatability and high cycle life. Optional hermetically sealed contacts mean the D56M can be well suited when vapor ignition is a concern.

Typical uses include airflow control plenums.

For a similar switch with a higher resistance to shock and vibration, refer to the D16M

For qualification information, please consult the sales or engineering departments.

Features

Intended for gaseous media
Environmentally sealed with optional hermetically sealed contacts
Proven diaphragm and leaf spring technology for high cycle life

Titanium Grade 1 Strip Titanium Grade 2 Bars-Sheets and Plates-Tubes and Pipes Titanium Grade 5 ELI Bars-Sheets and Plates Titanium Ti-6Al-7Nb Bars

- To check and verify the RWR system on the aircraft and radiate threat signals to RWR antenna through couplers. - Radiate threat signals to jammer system.

It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

Integrated logistics support division, a Vendor Item Tool Manager, Consumables & Special Cutting Tools, Fixed and Rotary Wing String Lighting.

P18M Pressure switch

The OE-TCOS-IN4-75 is the professional-grade thermal clip-on sight for aiming and engagement designed to work seamlessly with a wide variety of firearms and daytime scopes. The OE-TCOS-IN4-75 is a plug and play unit, deployed in seconds with no zeroing needed. It is also a great tool for reconnaissance and tactical surveillance. The latest generation silent and Auto-NUC sensor is at the base of the OE-TCOS-IN4-75. All hardware and software solutions are built around the sensor and offer exceptional image quality along with unique tools for added tactical.

Designed and suitable for a wide range of missions. It is light and ruggedized and its multi-purpose capability provides freedom of action for the commander in all environments.