SAT-PRE establish emergency communication networks for communication-disrupted areas during natural disasters and catastrophes. SAT-PRE ensures communications between commands in deepest operational areas and also between team members. it maximized communication success in adverse terrain, weather and other terrible conditions. The rate of transfer success is over 90%. The implementation of various communication methods such as voice PTT, automatic location reporting, and specialized transmission and reception using satellites as we reflects the latest technology based on Iridium 2nd generation satellites. The mission control center's CL-700 receives information transmitted from the operational area SAT-PRE in real time for up to 1,000 units and shares on-site situations by linking with other systems.

The Ophir® SupIR 80-1200mm MWIR f/5.5 and SupIR 60-1200mm MWIR f/4 lenses are designed for 15 µm 640x512 and SXGA 10 µm pitch FPA (focal plan arrays) cooled MWIR detectors, respectively, providing detection ranges exceeding 28 km. Key Features: - High performance IR continuous zoom lens - Compatibility with 10 µm SXGA/HD and 15 µm 640x512 cameras - Maintains accurate LOS & focus through the full zoom range - Designed for extended range observation & C-UAS systems - Detection range exceeds 26 km

Ultra-High Density: With a pin spacing of 0.025 inches, it achieves maximum miniaturization and lightweight design. Ultimate Reliability: Designed to ensure perfect signal integrity even in harsh environments. Durability: Boasts outstanding environmental resistance that meets military and aerospace standards.

A world well know Aviation Ground Support Equipment (AGSE) in support of military and commercial aircraft

To guarantee maximum safety and reliability, our DA 30 features a brushless motor and a contactless wear-free position sensor. This means maximum service life with the greatest‐possible power delivery and its design prevents electromagnetic emissions (EMI) caused by brush sparking. The housing made of saltwater‐resistant aluminum is HART‐coat treated, meets the IP‐67 standard for water and dust sealing and provides an integrated Sub‐D connector (MIL spec. circular connector or cable gland on request). Brackets integrated in the housing for horizontal and vertical assembly. 8‐fold, ball‐bearing supported, steel gear train, drive shaft with ANSI multi‐tooth. The DA 30 series can be equipped with a standard PWM input (Pulse Width Modulation) that has two different interfaces: a differential, galvanic isolated interface (Opto‐Coupler) and a single‐ended interface with CMOS levels that is also used to program the servo parameters. It includes analog position feedback to detect the drive shaft position. A differential RS‐422 PWM interface can be chosen instead of the opto‐coupled interface. The DA 30 with digital serial command interface (RS‐485) receives its commands via a CRC secured protocol. It can return not only the shaft position in digital format, but also several diagnostic data such as the level of the supply voltage, current consumption and the temperature of the motor and electronics in digital form (optionally also the humidity within the actuator case). These kind of diagnostic capabilities help to determine the health state of the actuators before, during and after deployment.

SeaHFlight is an advanced 2D/3D GIS-based command and control solution engineered for the comprehensive management of low-altitude aircraft, including helicopters, drones, and future UAMs. It provides a complete operational picture, offering full lifecycle management from initial flight planning and real-time monitoring to post-flight performance analysis. Key Capabilities: Unified Situational Awareness: Achieve superior decision-making with a dynamic 2D/3D operational map that visualizes all air assets in real-time. The system integrates crucial data layers, including weather, airspace information, and flight plans. End-to-End Mission Management: Streamline the entire operational workflow, covering everything from flight plan creation and pilot hour management to flight history recording and detailed performance evaluation. Proven Interoperability: SeaHFlight is designed for seamless data integration with key national and military agencies (Army, Police, National Fire Agency, Forest Service). This creates a unified network for complex, multi-agency public safety or defense operations. Future-Ready Platform: Built to manage not only current helicopter and drone fleets but also the next generation of Urban Air Mobility (UAM), SeaHFlight is a scalable, long-term solution for modern aviation.

Main Characteristics Excellent broadband characteristics Radiation patterns virtually independent of frequency Only one antenna required to cover a wide frequency range Selectable polarization plane Sturdy construction Suitable for mobile use Main Use Optimized for radiomonitoring and measurements Design Owing to its broadband characteristics and the virtually frequency-independent radiation patterns, the SLP – 200M-001G covers a very wide frequency range The sturdy construction makes the antenna Suitable for stationary and mobile applications

· Optimized deployment of manned and unmanned aerial assets with separate takeoff and landing runways · Securing aerial/maritime superiority with unmanned combat aerial vehicles (UCAVs) and Drone · Expanded real-time surveillance range through the operation of medium-altitude unmanned reconnaissance aerial vehicles · Enhanced assault capabilities to target and command & control (C2) with manned and unmanned forces