· Wide-area situational awareness through omni-directional cameras and EO/IR sensors · Seamless remote control enabled by LEO satellite communication and USV teaming operation · Multi mission capabilities by interchangeable mission modules such as UUV, UAV and compact rocket modules

Optimized and qualified for next generation Electronic Control Units the Intercompact Series is an innovative solution for PCB to PCB and floating mouting rack and panel applications currently offered in both signal and Ethernet versions. Designed to meet the requirements of the rail and industrial environments, it is also suitable for other demanding markets such as defence, space and test & measurement.

K806 - With the increasing number of borderless missions throughout the globe and infantry units who need to complete their missions as quickly as possible, the 6x6 Wheeled Armored Vehicle is aimed at performing in the rear for the purpose of defending military facilities, transporting forces, conducting logistics convoy and reconnaissance missions. K808 - 8x8 Wheeled Armored Vehicle(K808) is designed to support rapid deployment and reconnaissance operations of infantry in battlefields and mountains. Capable of both running on ground and water, K808 is also capable of arming up with different weapon systems such as Remote-Controlled Weapon System(RCWS) and medium caliber turret.

1. Integrate the most effective aspects of Visible and IR(Infrared) image. 2. Increase the efficiency through the ability to use in all weather conditions, day or night, including fog.

PELICAN-D JT is a MWIR detector for missile applications. The FPA is InSb based, having digital Readout Integrated Circuit (ROIC) in a format of 640 x 512 with 15μm pitch. Pelican-D JT has a unique structure of Dewar which enables very fast cool down time and hence quick mission readiness using Joule-Thomson (JT) cooler. Due to the low heat load on the focal plane, the detector achieves long mission duration. The Detector can be supplied with a proximity board which provides Camera Link interface to the customer system. This highly simplifies the integration of the detector to the system.

The Transmit/Receive Module splits 2 transmit input channels into 32 output channels. Each channel delivers an output power of at least 3.2 W with a transmit efficiency of 35.5% or higher. It features independent phase control for each transmit channel. On the receive side, 32 input channels are combined into two output channels. The total receive gain is 34 dB or greater, and each channel supports individual gain and phase control. The noise figure is 3.5 dB or lower per channel. Built-in monitoring functions include internal temperature monitoring and output signal monitoring.

Jonal Labs specializes in high temperature and flame resistant aerospace seals from design assistance to final product and maintenance.

The RFcore Radar series are FMCW type radar and were developed to detect/track small air targets. The major difference between three models is detection performance. RX32B is fundamental model. RX128B have four times larger radar than RX32B. RX192A have six times larger radar then RX32B. The number of the product name means the number of antenna elements. All have compact and lightweight physical architecture that concentrates all the components required for radar, such as antenna, RF components and radar signal processor, in a small single housing. Transport can be carried in the carrier box and can be easily carried by one person. For installation, you can use a commercially available camera tripod. The weight is about 7.5kg (RX32B) and 15.9kg (RX128B), and the lower connection part is compatible with the tripod connection for the camera. Power supply requires 12VDC (RX32B) and 24VDC power (RX128B and RX192A). When using a battery, it is possible to connect a 12V battery or 24V battery to radars. Usage time may vary depending on the battery capacity. RFCORE recommended the constant power supply. Transfer of Status and BIT information and simple control of the RX32B, RX128B and RX192A are possible with a web browser using the Ethernet connection for authorized users. Using the terminal program provided with the radar, you can view the radar control and detected target information in real time. All RX Radar series’ Power Amp and Core Chip were designed using RFcore's own products.