CarboNIX is a scalable shock-free separation system for microsats weighing between 10 and 500kg. It is available in 8'', 11,732'', 15'', 18.25'', 24'' and custom diameter sizes. CarboNIX's patented synchronous spring pusher system deploys satellites smoothly and evenly, with no unnecessary shocks or tumbling, thus minimizing risk of damage to a satellite's sensitive optical payloads and electronic components. It is the lowest-shock and lowest-tumbling separation system ever deployed in space.

i3system’s line scanning X-ray detector platform, XID-C15DP/XID-C24DC, is a high performance and cost effective solution for dental panoramic, cephalometric applications. i3system’s direct type sensor ensures the most sharp images among the current products in the market. XID series is designed for compact size and easy installation. High DQE(Direct Quant㎛ Efficiency) enables high performance at lower dose of X-ray. Introduction Indirect type X-ray detector uses the scintillator and the photo-diode(CCD or CMOS sensor) for conversion of the X-ray into the light and for taking images espectively. But the light scatters and goes extinct during it passes through the scintillator and reaches to the CCD or CMOS sensor. As a result, it is inevitable to get blurred image. In the mean time, XID C15DP, direct type detector, converts X-rays into electronic signals directly without conversion process of light. Because X-ray is not converted into light, it provides much sharper images than indirect type detector. XID C15DP is designed to compact for easy installation. It provides Gigabit Ethernet port on the detector for easy configuration. Instead of Gigabit Ethernet, camera link or optical interface can be provided according to requirements of users.

The First & Only Autonomous AI Pilot Deployed Since 2018

Similar to a human pilot, Hivemind reads and reacts to the battlefield, and does not require GPS, waypoints, or comms to make decisions. Hivemind enables intelligent teams to perform missions ranging from room clearance with Novas, penetrating air defense systems with V-BATs, to dogfighting F-16s.

Intelligent Teaming

Shield AI’s synthetic environments combined with human-machine tactics and behaviors. Testing and learning in real physics simulations reduces engineering cycle times and enables rapid real-world deployment. Welcome to the defense metaverse.

Edge Autonomy

The aircraft uses sensors to create a map or world-view, the computer then tells the aircraft or autopilot where to go and what to do to execute its mission. No GPS, no waypoints, and no comms are needed for aircraft to accomplish their missions.

The MD70MH-DroneCAN is an 11.6mm, metal gear, 13-gram micro servo for higher voltage applications. Featuring a single output ball bearing, cored brush motor, and magnetic rotary encoder, the MD70MH-DroneCAN is often used in compact fixed wing UAV and drone applications where space and weight are mission critical concerns. The MD70MH utilizes DroneCAN (formerly UAVCAN) control at a voltage range from 4.8~7.4 volts. #UAV #UAS #UGV

It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

The PANDION Q650 is a versatile military and industrial drone, designed for easy maintenance and adaptability. Featuring a multi-mount bracket, it allows users to customize payloads such as speakers, searchlights, and LiDAR sensors to meet specific operational needs. Built for rugged environments, it is rated IP43 for water and dust resistance, ensuring durability in harsh conditions. The drone can perform missions with a flight time of approximately 40 minutes. Application : Day/Night Reconnaissance, Warning Sign Delivery, Automatic Patrol Mission, High-Res Photo/Video, Package Delivery (Under 1Kg)

Current list of Lockheed Martin products.

This plays an important role that connects EMI shielding pieces of connectors and cables when manufacturing EMI shielded cables. It is also applied and used in defense, space, aviation, and industrial equipment. Key features of the military connector adapter: Designed to be compatible with various MS/VG standard connectors and general connectors. Environmental Protection: It is waterproof and dustproof, ensuring stable operation in severe weather and extreme environments. Robustness: It is highly durable against impact, vibration, corrosion, and more to meet military and industrial requirements. EMI shield: Prevent electromagnetic interference (EMI) to maintain signal integrity.