Servo control is performed to remotely drive the armament device of the unmanned search vehicle and shoot at a moving target. - PMSM 4-axis servo control - Built-in regeneration function - Self-inspection and protection function

Side shells, wing shells and fuselage structures are made of CFK, GFK, aluminium or organic sheets and get connected during production. Sealants are used to seal the connection surfaces. These are usually two-component polysulphides, which have to be applied in different geometries. Typical applications are: Fillet sealings, oversealings, interface sealings and seal caps. Due to their properties, polysulfides require very low pressure and shear handling. The compressibility of the fillers contained in the medium requires a high level of expertise and a coherent overall system from material removal to application. With manual application, long production times and high material ejection have a negative influence on the complete process. Complex quality standards are required due to the risk of human error. With the in-house developments of the vipro-DUOMIX from ViscoTec, this process can be depicted fully automatically. The individual nozzle design is also adapted to each application. The result is a controlled dosage in compliance with the specifications and at the same time the highest repeat accuracy.

The mRO-50 Ruggedized is a breakthrough microwave optical double resonance (MODR) low SWaP-C Miniaturized Rubidium Oscillator designed to meet the latest commercial, military and aerospace requirements where time stability and power consumption are critical. It provides a one day holdover below 1µs and a retrace below 1E-10 in a form factor (50.8 x 50.8 x 20mm) that takes up only 51 cc of volume (about one-third of the volume compared to standard rubidiums) and consumes only 0.36W of power, which is about ten times less than existing solutions with similar capabilities. The mRO-50 Ruggedized Oscillator provides accurate frequency and precise time synchronization to mobile applications, such as military radio-pack systems in GNSS-degraded or denied environments. Its wide-ranging operating temperature of -40° to +80°C is also ideal for: Underwater Applications, Military Communications, Radars, Low Earth Orbit, Electronic Warfare, Airbornes & Avionics, UAV/UGV/USV/UUV

MPS Microsystems offers a complete range of high precision ball screws for positioning less than 5 µm. Mostly custom-made, these screws ensure smooth and uniform movement resulting from the high precision of their thread, achieved by grinding. Our ball screws are made exclusively of stainless steel and are fitted with double nuts to allow fine adjustment of the axial play. Moreover, an optional ogival thread can provide a higher static and dynamic load capacity. Thanks to a large number of options, we can ensure that the ball screw meets your technical and quality needs. The following parameters can be personalized: lubricant (grease, oil, dry lubrication, no lubrication), customized screw ends, shape and external dimensions of the nut and screw, multiple nuts on the same screw, left-hand thread, thread length, specific axial play, special surface treatment, and more.

< Frequency Range > ● 2500 ~ 6000 MHz < Output Power (W) > ● 35 < Gain (db) > ● 46 < Power Supply (V) > ● 30 < Current (A) > ● 10 < Dimension > ● 175.3 x 91.4 x 28 (mm)

Supported by a rugged internal combustion engine compatible with heavy fuels, Reliant delivers over 10 hours of persistent ISR without runways, launchers, or recovery gear. Designed for high-wind, high-altitude, and denied environments, Reliant excels where legacy platforms fall short. Dual swappable payload bays support ISR, SIGINT, or EW missions, while onboard edge AI processing enabled by NVIDIA Jetson Orin NX modules delivers real-time threat detection and adaptive rerouting, even without connectivity. The platform can be deployed by a two-person team in under 10 minutes using a compact 10×10-meter footprint for launch and recovery from rooftops, vehicles, ships, or remote terrain. With an IP55-rated, all-weather design and reliable GNSS-denied navigation, Reliant gives operators the flexibility and resilience required to operate in complex, contested battlespaces.

Next-generation satellite multi-band terminal system development project

Spring probes are designed to optimize performance in high reliability, multicycle applications. Smiths Interconnect’s spring probes are compliant which makes them ideal for blind mate applications as they self correct for x, y, z, rotational and angular misalignment of the target. Offered in compressed heights less than 2 mm and utilized on pitches as tight as 0.4 mm, they are well suited for high density, board-to-board, battery contact and high frequency applications. Mixed signals and functionality can be designed into a single connector.