The X-band LNB is a satellite ground transport terminal that includes a transmission rejection filter and performs downconversion of X-band signals to IF using an internal reference frequency. It features dustproof, moisture-proof, and waterproof protection, along with self-diagnostic functions such as a lock alarm. The unit provides a total gain of over 60 dB and supports a wide bandwidth of 500 MHz. Its frequency stability is maintained within 0.31 ppm.

A super-evolution of the original platform brought about by the present-day tactical requirements and offering specialized features and functions specifically designed and fitted to provide top-notch efficiency, high operating speeds, a low recoil impulse, and a decisive and consistent feel. We took special care to design a weapon that offers very fast emergency reloads even in the most demanding of environments and situations, such as sports shooting, law enforcement or civil defense. The entire furniture set is AK compatible and thus the weapon can be fully configured to fit and use a wide array of accessories, making it suited for any preferences and all tasks.

JEFF FALCON is the tactical spectacle for Military & Law Enforcement. The lightweight glasses give you super flexibility for comfortable fit in use. It is compliant with ANSI Z87.1 requirement and exceed U.S. Military eyewear ballistic resistance requirement MIL-PRF-3242A. Anti-Scratch and Anti-Reflection coating on polycarbonate lenses give you up to 99.9 protections from UV rays and thin temples enable compatibility with communication systems and helmets.

STIM300 is a small, tactical grade, low weight, high performance non-GPS aided Inertial Measurement Unit. It contains 3 highly accurate MEMS gyros, 3 high stability accelerometers and 3 inclinometers. The IMU is factory calibrated and compensated over its entire operating temperature range. STIM300 is a cost-effective ITAR free solution for systems that only had FOGs as an alternative when reaching for the performance level of that STIM300 can offer. Each axis is factory calibrated for bias, sensitivity and compensated for temperature effects to provide high-accuracy measurements. The unit runs off a single +5V supply and communicates via a RS422 interface. The use of a 32-bit RISC ARM microcontroller provides flexibility in the configuration, like choice of output unit, sampling frequency, LP filter -3dB frequency and RS422 bit-rate and protocol parameters. For more advanced users, STIM277H may be put in Service Mode. In this mode all the configuration parameters can be temporarily or permanently changed by overwriting the current settings in the flash memory. Service Mode also provides the ability to perform single measurements, perform diagnostics and obtain a higher detail in the status byte.

To complete their missions successfully in hostile territory, helicopters must have accurate, jam-resistant navigation systems that are able to operate effectively and dependably in all mission scenarios. These conditions may require high-speed, low-level flight over featureless, unknown terrain, and in the presence of enemy jamming.

Maximum Control for your interactive graphical displays. Developing HMIs for safety- and mission-critical avionics and embedded displays only gets more demanding. VAPS XT offers HMI designers, systems engineers, and embedded engineers maximum control and flexibility for creating interactive real-time graphical displays for avionics and other safety-critical embedded applications. With an open architecture and integrated logic capabilities, VAPS XT provides the essential features for the design and deployment of certifiable cockpit displays. VAPS XT provides a model-based environment supporting all phases of development from initial concept to embedded deployment. Through a flexible porting structure, VAPS XT applications can be easily deployed to virtually any embedded target with excellent performance.

- When flying in information, azimuth information about the attitude and position of the lead aircraft is provided to pilots of surrounding aircraft in the formation - Light Intensity : 6 cd (Beam Spread : 60) - NVIS Green A/IR per MIL-STD-3009

DS AETHER CT provides various industrial Gas Tube Skids such as Hydrogen (H2), Helium (He), Neon (Ne), Nitrogen (N2) and Argon (Ar) as well as CNG. The working pressure is set to national requirements or customer's demands. The color of the jumbo tubes and skid frames follows ISO color codes or the designations of customers.