Fast & precise 5-axis exceeds expectations • 15000, 20000 r/min high speed spindle • B-axis/C-axis 0.0001 degree control as standard • Tool change time (C-T-C) 3.8s, 28% faster than previous model • Increased X/Y/Z-axis rapid traverse speed & acc./dec. • Cooling functions as std. on spindle, motor/LM guide/ball screw (X/Y/Z), C-axis table motor • Integrated thermal compensation systems for spindle and structure FURTHER INCREASED MACHINING CAPACITY • Ø630mm dia. 2-axis tilting table, 26% increased compared to previous model • Max. Ø600 x H500mm machining area, 32% increased compared to previous model • Max. 400kg table load capacity with stable table support structure • X/Y/Z axis travel distance 650/520/480mm, up to 20% increased compared to previous model EASY ACCESS, EASIER OPERATION • Easy setup of workpieces with 580mm distance between operator and table center • Easy tool exchange by placing the tool magazine door on the front and applying a tool removal device (Auto Kicking Device) • Improved chip disposal capability with enhanced coolant flood & flushing functions • Grease lubrication system • Compact integrated automation system (AWC)

Drone Hunter FD is a powerful countermeasure against drone threats. Designed to cover ISM bands and GNSS L1 , L2, L5 it effectively neutralizes a single drone or multiple drones approaching in a direction from a distance of 5km and operating within its antenna beam width. It is equipped with high-power amplifiers and signal generators to enable powerful multi-band continuous jamming. This field-proven solution operates with a positioner that receives data from a seamlessly integrated detection/identification system by OURANOSTM C2 or third-party systems. In addition, it can be used as a stationary/mobile solution.

Precision Molded LWIR lenses using Chalcogenide glass "High-Volume & Cost Effective Manufacturing" High performance Diffractive-Aspheric LWIR(@8~12μm) lenses Athermalized Fixed Focus: FL 8.1, 15, 18mm / F# 1.0 High Efficiency AR(Anti-Reflective) Coating Technique for LWIR Applications: Thermal Imaging and Thermography

Every Partnership Pavilion is staffed by an experienced event team. Whether it’s coordinating with the show organizer; providing technical support; assisting with contractors, catering, or translators; or tracking a shipment, Team Kallman will help.

Wing shells, side shells and fuselage sections are usually made of carbon fibre composites and glued together during the production process. With many components, a groove or an open edge remains after the bonding process, which must be filled or sealed. A modified two-component epoxy resin is often mixed and then applied manually. This often entails long production times and complex quality controls. Equally high material costs due to the processing of materials from cartridges. ViscoTec defies short pot life and materials that are difficult to handle: Thanks to a coherent overall system from material removal to material application, this process can be automated. The two components are taken separately from cartridges, hobbocks or drums and fed via hose lines to a two-component dosing system. Only at the very end of the process they are mixed in a static mixing tube and applied to the substrate (e.g. via a nozzle). The process is controlled and monitored by pressure sensors.

REDCOM Sigma® C2 Console is a powerful app that provides operators with a single pane of glass to monitor and control all communications within the tactical C2 network, including both SIP and radio endpoints. The REDCOM C2 Console is browser-based and runs on any PC, laptop, or tablet.

Hermetic connectors are a special class of sealed Mil /Aero interconnect that incorporates glass-to-metal or other highly-engineered sealing technology. Hermetic seal connectors are specified for applications as divergent as submarines and orbiting satellites. They are deployed to resist moisture ingress in underground applications and to withstand pressure differentials in vacuum chambers, laboratory equipment and commercial and military aircraft. Hermetic seal connectors, such as the MIL-DTL-38999 Series I, II, III and IV supplied by Glenair, are principally designed for use in military aerospace — in fact, the sealing requirement for connector hermeticity was originally driven by military electronic applications. But the products are equally at home in commercial applications such as oil-patch, logging equipment or medical devices.

PELICAN-D LW is a 640x512 elements, 15μm pitch, Type-2 SuperLattice (T2SL) technology based 2D Long Wave Infrared (LWIR) digital IDCA. The new ROIC outputs digital signal, similarly to SCD’s previous digital detectors: Sebastian-320, Sebastian-480, Sebastian-640, Pelican-D, Hercules, and Blackbird. Pelican-D LW is available in the same configurations as the standard (MW) Pelican-D, with a large variety of cold shield apertures and cooler types. The proximity board provides the FPA timing and sensitive power supplies. Camera-Link interface highly simplifies the integration of the detector to the system.