Our broad alloy portfolio enables customers to achieve higher efficiencies, reduce pollution levels, extend product life, and reduce costs. Our corrosion-resistant alloys are generally distinguished by the HASTELLOY® brand and our high-temperature family of alloys are generally distinguished by the brand.

Type : Radial (3P) Size(Ø, mm) : 82 × 58 Weight(kg) : 0.55 N. Speed(rpm) : 6,200 N. Torque(Nm) : 2 N. Power(kW) : 1.3

[Cutting by water jet] Micro water jet cutting: The micro water jet enables a refined process to be carried out in precision cutting. This high-precision technology reduces the jet diameter by a factor of 5 and makes water jet cutting more precise by a factor of 10. The micro water jet achieves a cutting accuracy of +/- 0.01 mm and a positioning accuracy of ±0.005 mm. The proven advantages of the cold cutting process remain unchanged. In the pure water process, the cutting width was reduced to 0.2 mm in the abrasive process for hard materials such as nickel-based alloys and titanium. The new technology controls the cutting process and manipulates the cutting path depending on the contour and speed enabling a highly precise cut. Standard waterjet cutting: Water jet cutting is highly efficient and at the same time less severe than other cutting techniques. Low process forces and thermal loads prevent bending or melting. We can cut filigree delicate contours from practically all nickel alloys and titanium alloys. Using our standard process we can cut a range of shapes and dimensions according to customer requirements and drawings and achieve tolerances of +/- 0.1 mm or +/- 0.2 mm.

High Power Polarizing Beamsplitter Cube coatings are deposited on the hypotenuse of right angle prisms that are optically contacted. They are designed to separate an incident beam into its S and P polarization components with an average extinction ratio (TP/TS) in excess of 500 : 1. The incident energy is split into two orthogonally polarized beams that emerge at 90。with respect to each other. These coatings were developed specifically for use in high power pulsed and CW laser applications.

The Signaty V IR Helmet Strobe is a Korean-made Identification Friend or Foe (IFF) device that supports IR and four LED colors (red, green, blue, white), ensuring visibility up to 5 km. It features short-range communication (CDS) for automatic synchronization among multiple units, along with SOS, auto-sync, one-hand operation, and vibration feedback functions. Powered by a single AA battery, it operates for up to 130 hours. Built to MIL-STD-810G standards for drop, waterproof, and dustproof protection, it delivers proven durability. Certified with KC and backed by domestic service, it is reliable for military, police, and firefighting operations.

Hydraulic top bracing is an attenuation device installed between the main engine and the hull of the ship to reduce thermal expansion and vibration from the main engine to natural frequencies. The operating principle is an automatic control operating system through in/out and on/off the operating range of the hydraulic top bracing according to the rpm of the main engine. The number of hydraulic cylinders per engine is typically 2, 4, 6 depending on the type of engine, up to 8 are installed if necessary, and 1~2 of control panels are installed.

Aircraft usage optimization is a key factor for all airlines. Safran Engineering Services helps major aircraft manufacturers perform and optimize the service level offered to the airlines. Flight operation activities are performed in France, Spain and India with global coordination.

With more than 33,000 delivered to date, CFM56® engines mainly power single-aisle commercial jets from Airbus and Boeing. The CFM56®, developing 18,500 to 33,000 lb of thrust, set a standard in this market. It owes its impressive success to exceptional performance and reliability, the result of the two partners' technical excellence.