< Frequency Range > ● LB-400: 400 ~ 460MHz ● LB-900: 800~928MHz ● MB-1500: 1300~1500MHz ● MB-2400: 2400 ~ 2500MHz ● HB-5.2: 5150 ~ 5250MHz ● HB-5.8: 5725 ~ 5875MHz < TX path output Power (at antenna port) > ● Normal mode: 35dBm [min] ● On each antenna port 2x 35dBm ● Interference mode: 40dBm [min] < TX path maximum Input Power > ● +20 dBm < RX path Gain > ● 25dB typ. < RX path Noise figure > ● Low bands: 3dB max. ● High bands 3.5dB max. < RX path IIP3 > ● -10dBm typ. < RX IP1dB compression point > ● 15dBm typ. < Power Supply > ● +24V ± 1 Vdc

SBC (single board computer) for VMEbus based on TI DaVinci CPU, ARM Cortex-A8 1.2GHz, C674x 1GHz DSP, SGX530 3D Graphics Engine, DDR3 memory, Giga Ethernet 2 port, video input/output 5 port, SATA-2 2.5" SDD This is a built-in SBC board for video processing. Application field: image processing system Shipboard EO video system Video encoder/decoder system Multi-channel video storage/distribution system Characteristic: VME type multi-channel video recorder Supports 4-channel NTSC/PAL video compression (H.264) Supports 4-channel audio recording Supports local video and audio playback Supports network RTSP function Supports Ethernet-based GUI control

STIM300 is a small, tactical grade, low weight, high performance non-GPS aided Inertial Measurement Unit. It contains 3 highly accurate MEMS gyros, 3 high stability accelerometers and 3 inclinometers. The IMU is factory calibrated and compensated over its entire operating temperature range. STIM300 is a cost-effective ITAR free solution for systems that only had FOGs as an alternative when reaching for the performance level of that STIM300 can offer. Each axis is factory calibrated for bias, sensitivity and compensated for temperature effects to provide high-accuracy measurements. The unit runs off a single +5V supply and communicates via a RS422 interface. The use of a 32-bit RISC ARM microcontroller provides flexibility in the configuration, like choice of output unit, sampling frequency, LP filter -3dB frequency and RS422 bit-rate and protocol parameters. For more advanced users, STIM277H may be put in Service Mode. In this mode all the configuration parameters can be temporarily or permanently changed by overwriting the current settings in the flash memory. Service Mode also provides the ability to perform single measurements, perform diagnostics and obtain a higher detail in the status byte.

Suite au Conseil du 7 octobre 2021, le GIFAS a accueilli Elixir Aircraft. Découvrez le témoignage de son Président. " Elixir Aircraft, entreprise rochelaise de 60 salariés, a été créé en 2015 afin de répondre aux enjeux de l'aviation légère : réaliser des appareils plus sûrs, plus économes et plus polyvalents .

Premium refined titanium ingots, manufactured using imported high-purity titanium sponge and subjected to a minimum of two VAR (Vacuum Arc Remelting) processes. Forged to meet customer requirements, available in various semi-finished forms (bar, plate, ring) for defense and display industries.

Fasteners, tools, metal kits for with commercial and industrial application

Our MDB1200WP industrial actuator offers a contactless magnetic encoder, brushless motor and IP67-certified water & dust-proof protection, making it suitable for many demanding industrial applications. This 30mm powerhouse delivers over 1500 oz-inches of torque at 7.4V and features an aluminum alloy case to dissipate heat, two ball bearings and five hardened steel gears, and PWM control protocol. Program numerous parameters to optimize the installation and performance for your industrial applications. #UAV #UAS #UGV #UUV #USV

Solution Overview EagleEye is a a synthetic data generation & management platform for AI training that integrates image generation, LLMOps, and MLOps. It automates high‑quality dataset generation, labeling, and model validation—and has been certified “military suitable” and delivered first to the ROK Army AI Center. Main Features Image generation with text/image prompts; object/background customization LLMOps: prompt understanding + image–text labeling workflow MLOps: CV model training/validation, dataset versioning, experiment tracking End‑to‑end pipeline from data preprocessing to model deployment Data augmentation and management for scalable, repeatable training Key Advantages Certified “military suitable”; meets defense operational requirements First AI solution supplied to the ROK Army AI Center, proving reliability One‑stop synthetic data + model ops cuts development/validation time Fully in‑house stack enables rapid updates and mission‑tailored customization 2025: First AI product delivered to the ROK Army AI Center for defense AI projects Used to generate and manage high-quality synthetic imagery for military AI model training and validation