The system can be used as a measurement device for first responders for the exploration of hazardous areas. GAMON-Drone system is designed to offer the best combination of portability, low power consumption and performance. The unit is assembled in a lightweight enclosure that contains both the Scintillator Detector and the Digital Signal Processing Electronics. GAMON-Drone can identify gamma-emitting radionuclides and differentiate them based on the category they belong to, distinguishing between NORM, medical and industrial.

The VPX3-C11 which provides a full 3U OpenVPX(VITA 65) is a Single Board Computer(SBC) that combines the power, versatility, cost-effectiveness of the 11th generation Intel Xeon W processor and RM590E PCH chipset with the reliability. VPX3-C11 is based on the Intel Xeon W- 11865MLE CPU that has 8 cores running at max 4.5GHz and providing 32Gbytes of high-bandwidth DDR4 SDRAM. Intel Xeon processor includes an integrated Intel UHD Graphics 11th Gen(32 EU) graphics engine, providing discrete GPU performance with OpenGL for graphicsintensive applications. For storage application VPX3-C11 provides the built-in 80GB SLC NVMe SSD solution via PCIe x4 lanes as well as the external SATA expansion through VPX site. The VPX3-C11 satisfies the demanding applications ranging from tactical aircraft to armoured vehicles to rugged industrial systems, with its rich complement of features and I/O including Intel Graphics, Integrated Platform Management Interface, Gigabit Ethernet, DIO, Serial channels, USB ports and more. Especially VPX3-C11 was designed to keep the pin compatibility with VPX3-C11, previous 6th Generation model in terms of I/O interface signal arrangement.

Main advantages of the PBS ECS systems include the possibility of cooling, heating and ventilation in one system, minimal power consumption, ecological operation without the need for a coolant and a compact design. Specific applications of the ECS systems include light combat aircraft AERO L-159 ALCA, jet trainers AERO L-39NG and L-39 Albatros, etc.

It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

0.8m급 고해상도 초소형 지구관측 위성으로, 군집운용을 통해 고빈도 · 정밀 감시체계를 구축합니다. SpaceEye-M is a small satellite to produce high-resolution image data. A constellation of SpaceEye-M can perform precise monitoring over a large area with high revisit.

We provide advanced Laser-wire Directed Energy Deposition (LW-DED) 3D printing service. Our capabilities include processing various aerospace-grade materials including titanium, niobium, and other specialized alloys, with unlimited scalability for critical aerospace component production and prototyping.

The Pseudo-GNSS system is designed with tightly integrated firmware and hardware. The firmware generates PRN signals based on GNSS orbital data, modulates them to resemble real GNSS signals, and ensures time synchronization in a Master-Slave structure. A user-friendly GUI software enables easy device control. The hardware consists of a power unit, signal transmission unit, and communication unit. The power unit ensures stable supply through low-noise design, while the transmission unit radiates GNSS-like signals indoors. The communication unit supports Wi-Fi and wired connections for synchronization and control across multiple devices, with compatibility for smartphones and tablets to display positioning results.

Depending on the applications of our customers we offer a very wide range of technical solutions of assemblies and / or mechanical subassemblies with various characteristics. ABC offers a wide range of solutions ranging from micro-mechanics to large systems, based on standard solutions already developed and / or customized solutions as needed by the customer.